1 / 13

Power Systems Protection Test Equipment

Power Systems Protection Test Equipment. PCA2 Protection Condition Analyser. What is it?. All-in-one quick tester for Breaker & Protection Can test circuit Online or Offline Provides all data required for CBM / RCM maintenance programs Secondary Current Injection Set with timer.

annot
Télécharger la présentation

Power Systems Protection Test Equipment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Power Systems Protection Test Equipment

  2. PCA2 Protection Condition Analyser

  3. What is it? • All-in-one quick tester for Breaker & Protection • Can test circuit Online or Offline • Provides all data required for CBM / RCM maintenance programs • Secondary Current Injection Set with timer

  4. What does it test? • Relay Op-Time • Breaker Op-Time & Condition (+ reclose) • Trip coil current profile • Battery Condition, CT & Wiring Integrity • ‘Snapshot’ of entire protection & breaker system in actual, live operation

  5. Connections • Only 2-wires + clip-on CT • Substation wiring not altered • No connections broken or removed • More connections gives more info • No need for test blocks

  6. Connections – In use

  7. Online Testing – Why? • Captures critical ‘First Trip’ • Minimal Outage Time – can use reclose • Protection remains active to point of trip • Quick, cost-effective

  8. Online Injection – How? • Software based control-loop • Feedback from clip-on CT • Synchronised to Zero-crossing of load current

  9. Background • Developed with EDF Energy UK • 1000’s of 11 & 33kV circuits • Alternative to manual injection trip-testing • Safer • Combined test with Relay Op-Time • Single instrument • Modern, on-site results viewing, printing & archiving

  10. Results • Instant oscillographic & numeric display • On-screen measurements • IEEE COMTRADE format • Saved to internal Flash or USB-drive • PC display using any COMTRADE viewer • Built-in printer

  11. Results Oscillographic Results Numerical Results TRLY: Relay Op time LTCH: Trip latch release time BFFR: Time when TC slug reaches stop ACON: Time the ‘a’ contact interrupts the TC current END: Time when TC current reaches zero MCON: Time of transition of main interrupter contacts IPK1: Amplitude of first current peak IPLT: Max current peak VINI: Initial battery voltage VMIN: Minimum battery voltage

  12. Typical Faults/Impending Faults Identified

  13. Conclusion • Single multipurpose instrument • Rapid Testing • Online test (first trip) • Archived test results • On-site printout • Enables cost-effective CBM / RCM program

More Related