1 / 15

The Witch Winch : Building a Practical Gearbox

…And Now…. The Witch Winch : Building a Practical Gearbox. By Benjamin Kidd. What is a Gearbox?. A box of gears

aradia
Télécharger la présentation

The Witch Winch : Building a Practical Gearbox

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. …And Now… The Witch Winch:Building a Practical Gearbox By Benjamin Kidd ENGR-162/12 - Benjamin W. Kidd

  2. What is a Gearbox? • A box of gears • More specifically, an assembly to which a prime mover (such as a motor, gasoline engine, etc) is mounted to, and interconnects with gears for the purposes of speed and torque alterations (See Basic Practical Mechanics presentation) ENGR-162/12 - Benjamin W. Kidd

  3. What is a Winch? • A device used to wind a rope or cable for lifting or pulling. From http://www.ramsey.com/winches/ ENGR-162/12 - Benjamin W. Kidd

  4. Building a Gearbox - Materials DCM-216 All Electronics GR-5 All Electronics 270-1806 Radioshack It is recommended to purchase a project box instead of building one. Bottle Cap Coat Hanger ENGR-162/12 - Benjamin W. Kidd

  5. Building the Gearbox: The Pinion • Mount the pinion gear to the motor shaft – In the case of the DCM-216 and GR-5, the motor shaft must be built up to fit snugly with the gear. ENGR-162/12 - Benjamin W. Kidd

  6. Attaching the pinion • Epoxy the pinion gear to the motor (Use epoxy. Glue gun and super glue may not hold.) ENGR-162/12 - Benjamin W. Kidd

  7. The Gearbox • Mount the motor to the Gearbox using the front mounting screws. ENGR-162/12 - Benjamin W. Kidd

  8. Motor Mounting – Above View ENGR-162/12 - Benjamin W. Kidd

  9. Driven Gear Mounting • Use same procedure with driven gear as pinion – mount to coat hanger (or other material suitable to be used as a shaft.) ENGR-162/12 - Benjamin W. Kidd

  10. Driven Gear Mounting • Spindle added for “Winch” on driven gear shaft. ENGR-162/12 - Benjamin W. Kidd

  11. Gearbox ENGR-162/12 - Benjamin W. Kidd

  12. How fast does it wind a string? • To calculate, we need to know the number of times the winch shaft turns per unit time, and the circumference of the winch. ENGR-162/12 - Benjamin W. Kidd

  13. Calculating Shaft Speed • Assumptions • Motor RPM = 6000 RPM • Gearing Ratio 1:5 (pinion:gear) ENGR-162/12 - Benjamin W. Kidd

  14. Calculating Winding Time • Need Diameter of Winch Spindle • d = 3/8” • Find circumference • Now calculate winding time ENGR-162/12 - Benjamin W. Kidd

  15. Spindle Speed Table ENGR-162/12 - Benjamin W. Kidd

More Related