1 / 77

Grain Handling 29 CFR 1910.272

Grain Handling 29 CFR 1910.272.

ariane
Télécharger la présentation

Grain Handling 29 CFR 1910.272

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Grain Handling29 CFR 1910.272 • This material was produced under a grant (SH22284SH1)from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does the mention of trade names, commercial products, or organization imply endorsement by the U.S. Government.

  2. Program Objectives • At the conclusion of this presentation, participants will: • Be able to identify hazards associated with confined space work in the grain industry • Understand the process for confined space entry and lock out procedures • Be able to discuss the confined space housekeeping procedures involved in grain handling • Know where to look for OSHA references and resources related to confined space entry in the grain industry

  3. Statistics:Involvement in Farming in the U.S. • 2.1 Million farmers • 2% of the population Reference: http://www.epa.gov/oecaagct/ag101/demographics.html

  4. Statistics of Injury/Mortality:U.S. in Agriculture • 70,000 Disabling Injuries • 596 Fatalities (2010) • 26.8 deaths per 100,000 workers Reference: www.bls.gov/news.release/pdf/cfoi.pdf

  5. What is a Confined Space? • It is a space that: • Is large enough and so configured that an employee can enter and perform work; • Has limited or restricted means of entry and exit; • Is not designed for continuous human occupancy

  6. ENTRY • The act by which a person intentionally passes through an opening into a confined space. • Any part of the body passing through the opening is considered entry.

  7. Potential Hazards in Confined Spaces • Oxygen Deficient • <19.5% oxygen • Oxygen Enriched • >23.5% oxygen • Flammable • Toxic Materials • Electricity • Mechanical Hazards • Temperature Extremes • Engulfment Hazards • Noise • Falling Objects • Slick/Wet Surfaces

  8. IDLH • IMMEDIATELY DANGEROUS TO LIFE OR HEALTH • Any condition which poses an immediate threat to the life of an entrant, or; • Would cause irreversible adverse health effects, or; • Would interfere with an individual’s ability to escape unaided from a permit space.

  9. IDLH No person shall: Enter – Work – or Remain in an IDLH condition until such time that the condition has been eliminated or controlled. Source: CDC/NIOSH

  10. Confined Space - Hazards O2 All living creatures require oxygen to live. One of the primary hazards of entering confined spaces is oxygen deficiency. When oxygen is present in concentrations less than 19.5% the atmosphere is said to be oxygen deficient. O2

  11. Oxygen Deficient Atmospheres 19.5% Minimum acceptable oxygen level. 15 – 19% Decreased ability to work strenuously. Impaired coordination. 12 – 14% Respiration increases - Poor Judgment. 10 – 12% Respiration increases – Lips Blue. 8 – 10% Mental failure – Fainting, Nausea, Unconscious, Vomiting. 6 – 8% Possible recovery 4-5 minutes, 50 percent fatal after 6 minutes, fatal after 8 minutes 4 – 6% Coma in 40 seconds – Death. Source: NIOSH Datasheet

  12. Confined Space - Hazards Oxygen deficiency can be caused by several different processes: Consumption: oxygen is used up by the person who is in the confined space and is turned into carbon dioxide. Displacement: denser materials push the oxygen out of the confined space. Reaction: oxygen reacts with other materials to make other compounds.

  13. Flammable Atmospheres Factors Needed: • Sufficient oxygen content • Flammable gas or vapor present • Proper air/gas mixture to cause fire or explosion Typical Ignition Sources: • Sparking or electric tools • Static Electricity • Welding/Cutting Operations • Smoking • Ignition source from outside

  14. Toxic Atmospheres Toxic atmospheres can be caused by: Product stored in a confined space. • Gases released drying grain. • Decomposition of materials stored. • Gases released when cleaning. • Oxidation of metals Work Performed in a confined space. • Welding, cutting, painting, scraping, sanding, etc. Toxic materials adjacent to a confined space.

  15. Toxic Atmosphere - Carbon Monoxide • Odorless, Colorless Gas. • Is a Combustion By-Product. • People can quickly collapse at high concentrations.

  16. Temperature Extremes • Extremely hot or cold outside temperatures can magnify the temperature inside the confined space. • Steam cleaning can increase temperatures within a confined space. • Humidity factors can affect workers. • Work process inside the confined space can increase temperature extremes. • Wearing PPE can overheat the body.

  17. Temperature Extremes Attendant needs to keep a close watch on Entrant/Worker. Worker will need frequent rest and water breaks.

  18. Information from Dr. Charles Schwab, Iowa State University

  19. Information from Dr. Charles Schwab, Iowa State University

  20. Three main reasons people get trapped in grain 1. Flowing Grain!

  21. 1. Flowing Grain!

  22. 2. Crusted Grain!

  23. 2. Crusted Grain!

  24. 3. Grain Avalanche!

  25. 3. Grain Avalanche!

  26. Rescue?

  27. #1 - Stop Unloader

  28. #2 - Start Aeration

  29. #3 - Call For Help!

  30. Rescue

  31. Other Hazards • Noise • Amplified due to acoustics within the space. • Impairs effective communications. • Damages hearing. • Slick/Wet Surfaces • Slips and falls. • Increased chance of electrical shock. • Falling Objects • Topside openings expose workers inside confined space to falling objects.

  32. General Requirements For Grain Structures The employer shall issue a permit for entering bins, silos, or tanks, unless the employer or the employers representative is present during the entire operation. The permit shall be kept on file until completion of the entry operations.

  33. General Requirements All mechanical, electrical, hydraulic and pneumatic which presents a danger to employees inside grain storage structures shall be de-energized and shall be disconnected, locked-out and tagged, blocked off, or otherwise prevented from operating from other equally effective means or methods.

  34. General Requirements The atmosphere within a bin, silo or tank shall be tested for the presence of combustible gases, vapors and toxic agents when the employer has reason to believe they may be present. Additionally the atmosphere within a bin, silo or tank shall be tested for oxygen content unless there is continuous natural air movement or continuous forced air ventilation before and during the period employees are inside.

  35. General Requirements If the oxygen level is less than 19.5% or if combustible gas or vapor is detected in access of 10% of the lower flammable limit, or if toxic agents are present in excess of ceiling limits or present in concentrations that will cause health effects which prevent employees from effecting self-rescue or communication to obtain assistance then the following apply:

  36. General Requirements A - Ventilation shall be provided until the unsafe condition or conditions are eliminated, and the ventilation shall be continued as long as there is a possibility of recurrence of the unsafe condition while the bin, silo or tank is occupied by employees. B - If toxic or oxygen deficiency cannot be eliminated by ventilation, employees entering the bin, silo or tank shall wear an appropriate respirator. Respirator use shall be in accordance with the requirements of 29 CFR.1910.134.

  37. General Requirements Walking down grain and similar practices where an employee walks on grain to make it flow within or out from a grain storage structure or where an employee is on moving grain are prohibited.

  38. General Requirements When ever an employee enters a grain storage structure from a level at or above the stored grain or grain products, or whenever an employee walks or stands on or in stored grain of a depth which poses an engulfment hazard, the employer shall equip the employee with a body harness with lifeline, or a boatswain’s chair. The life line shall be so positioned and of sufficient length to prevent the employee from sinking further than waist-deep in the grain. Exception – Where the employer can demonstrate that the protection required is not feasible or creates a greater hazard, the employer shall provide an alternative means of protection which is demonstrated to prevent the employee from sinking further than waist-deep in the grain. Note – When the employee is standing or walking on a surface which the employer demonstrates is free from engulfment hazards, the lifeline or alternative means may be disconnected or removed.

  39. General Requirements An observer, equipped to provide assistance, shall be stationed outside the bin, silo or tank being entered by an employee. Communications (visual, voice, or signal line) shall be maintained between the observer and employee entering the bin, silo or tank.

  40. General Requirements The employee acting as an observer shall be trained in rescue procedures, including notification methods for obtaining additional assistance.

  41. General Requirements Employees shall not enter bins, silo, or tanks underneath a bridging condition, or where buildup of grain products on the sides could fall and bury them.

  42. General Requirements Entry into Flat Storage Structures - each employee who walks or stands on or in stored grain where the depth of the grain poses an engulfment hazard, shall be equipped a lifeline or alternative means which the employer demonstrates will prevent the employee from sinking further than waist-deep in the grain. Note – When the employee is standing or walking on a surface which the employer demonstrates is free from engulfment hazards, the lifeline or alternative means may be disconnected or removed.

  43. General Requirements Entry into Flat Storage Structures – Whenever an employee walks or stands on or in stored grain or grain products of a depth which poses an engulfment hazard, all equipment which presents a danger to that employee shall be de-energized, and shall be disconnected , locked-out and tagged, blocked off, or otherwise prevented from operating by other equally effective means or methods.

  44. General Requirements Entry into Flat Storage Structures - Walking down grain and similar practices where an employee walks on grain to make it flow within or out from a grain storage structure or where an employee is on moving grain are prohibited. No employee shall be permitted to be either underneath a bridging condition, or in any other location where an accumulation of grain on the sides or elsewhere could fall and engulf that employee.

  45. Training and Education Employees assigned special tasks, such as bin entry and handling of flammable or toxic substances, shall be provided training to perform these tasks safely. Note:training for an employee who enters grain storage structures includes training about engulfment and mechanical hazards and how to avoid them. When Must Training Be Conducted? New employees prior to starting work. New and current employees, the employer shall provide training at least annually and when changes to job assignment will expose them to new hazards.

  46. Confined Spaces Other Than Grain Storage Structures Confined spaces other than grain storage structures such as boot pits, scale pits, tanks, and other are covered under: 29 CFR.1910.146 Permit Required Confined Spaces and as such Entry Permits, Atmospheric testing and other requirements must be followed as per 1910.146

  47. Permit-Required Confined Space Entry Procedure • Isolate the space • Ventilate the space • Test the atmosphere • Select PPE • Conduct Pre-Entry Briefing • Complete permit • Enter the space

  48. Isolate the Spacefrom all hazards • Close Valves • Double block & bleed, or • Blank flange • Empty the Space • Depressurize, vent & drain • Lockout/Tagout Equipment • Electrical sources • Rotating/reciprocating parts • Hazardous materials • Clean residue from the space

  49. Lockout/Tagout • OSHA Regulation 29 CFR 1910.147 • “Lockout” To physically insure that all mechanical or electrical systems, that can be energized or started up, or release stored energy, are secured, isolated, disabled, or rendered inoperative. • “Tagout” The placement of a device to indicate that the energy isolating device and the equipment being controlled may not be operated until the tagout device is removed.

More Related