1 / 12

Dr Saad Al-Shahrani

SEPARATION POWER. The degree of separation which can be obtained with any particular separation process is indicated by “ the separation power or separation factor”.

aristotle-delgado
Télécharger la présentation

Dr Saad Al-Shahrani

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SEPARATION POWER • The degree of separation which can be obtained with any particular separation process is indicated by “ the separation power or separation factor”. • The objective of a separation device is to produce products of differing composition. So it is logical to define the separation factor in terms of product composition. ChE 334: Separation Processes Dr Saad Al-Shahrani

  2. Product P1 Xi,1, Xj,1 (liq.) Separation device Feed Components (i, j) (e.g L-L Extraction) Product P2 Xi,2, Xj,2 (liq.) COMPONENT RECOVERIES ANDPRODUCT PURITIES Where C= Concentration (mole fraction, mass fraction or mole/ vol., mass/ vol.) ChE 334: Separation Processes Dr Saad Al-Shahrani

  3. P1 yi,, yj, (vap.) Separation device Feed Components i,j (e.g Distillation or evaporation) P2 Xi,, Xj, (liq.) COMPONENT RECOVERIES ANDPRODUCT PURITIES ChE 334: Separation Processes Dr Saad Al-Shahrani

  4. If >1: component i in product (1) more than component j and component j in product (2) more than component i. • If <1: component j in product (1) more than component i and component i in product (2) more than component j. • If =1: No separation takes place between i and j. COMPONENT RECOVERIES ANDPRODUCT PURITIES ChE 334: Separation Processes Dr Saad Al-Shahrani

  5. COMPONENT RECOVERIES ANDPRODUCT PURITIES Where SFi, SFj = split fraction of component i and j respectively. ChE 334: Separation Processes Dr Saad Al-Shahrani

  6. COMPONENT RECOVERIES ANDPRODUCT PURITIES Example Referring to example 1. Key component split Column (separator) Separation factor, SPi,j nC4H10/ iC5H12 C1 C3H8/ iC4H10 C2 iC4H10/ nC4H10 C3 ChE 334: Separation Processes Dr Saad Al-Shahrani

  7. COMPONENT RECOVERIES ANDPRODUCT PURITIES Example: A feed, F, of 100 kmol/h of air containing 21 mol% O2 and 79 mol% N2 is to be partially separated by a membrane unit according to each of the following four sets of specifications. For each case, compute the amounts, in kmol/h, and compositions, in mol%, of the two products (retentate, R, and permeate, P). The membrane is more permeable to the oxygen. Case 1:50% recovery of O2 to the permeate and 87.5% recovery of N2 to the retentate. Case 2:50% recovery of O2 to the permeate and 50 mol% purity of O2 in the permeate. Case 3:85 mol% purity of N2 in the retentate and 50 mol% purity of O2 in the permeate. Case 4:85 mol% purity of N2 in the retentate and a split ratio of O2 in the permeate to the retentate equal to 1.1. ChE 334: Separation Processes Dr Saad Al-Shahrani

  8. 50% recovery of O2 to the permeate and 87.5% recovery of N2 to the retentate F Permeate (P) Membrane ? O2 fast ? ? N2 ? slow Retentate (R) COMPONENT RECOVERIES ANDPRODUCT PURITIES Solution Th feed is: Case 1: This is the simplest case to calculate because two recoveries are given: ChE 334: Separation Processes Dr Saad Al-Shahrani

  9. F Permeate (P) ? Membrane unit ? ? ? Retentate (R) COMPONENT RECOVERIES ANDPRODUCT PURITIES Case 2: With the recovery for O2 given, calculate its distribution into the two products: 50% recovery of O2 to the permeate and 50 mol% purity of O2 in the permeate Using the purity of O2 in the permeate, the total permeate is: By a total permeate material balance, By an overall N2 material balance, ChE 334: Separation Processes Dr Saad Al-Shahrani

  10. F Permeate (P) ? Membrane unit ? ? ? Retentate (R) COMPONENT RECOVERIES ANDPRODUCT PURITIES Case 3: With two purities given, write two simultaneous material balance equations, one for each component, in terms of the total retentate and total permeate. For nitrogen, with a fractional purity of 1.00 − 0.50 = 0.50 in the permeate, 85 mol% purity of N2 in the retentate and 50 mol% purity of O2 in the permeate For oxygen, with a fractional purity of 1.00 − 0.85 = 0.15 in the retentate, Solving (1) and (2) simultaneously for the total products gives ChE 334: Separation Processes Dr Saad Al-Shahrani

  11. F Permeate (P) ? Membrane unit ? ? ? Retentate (R) COMPONENT RECOVERIES ANDPRODUCT PURITIES Therefore, the component flow rates are 85 mol% purity of N2 in the retentate and a split ratio of O2 in the permeate to the retentate equal to 1.1. Case 4: First compute the O2 flow rates using the split ratio and an overall O2 material balance, ChE 334: Separation Processes Dr Saad Al-Shahrani

  12. COMPONENT RECOVERIES ANDPRODUCT PURITIES Solving these two equations simultaneously gives Since the retentate contains 85 mol% N2 and, therefore, 15 mol% O2, the flow rates for the N2 are ChE 334: Separation Processes Dr Saad Al-Shahrani

More Related