1 / 13

Richard Hansen

Carbon-Nanotube- Templated Metallic Microstructures for MEMS : Preparation and Characterization. Richard Hansen. Micro-electro-mechanical Systems (MEMS). Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion. MEMS Fabrication Processes. Motivation CNT-M

arsenio-zamora
Télécharger la présentation

Richard Hansen

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Carbon-Nanotube-Templated Metallic Microstructures for MEMS: Preparation and Characterization Richard Hansen

  2. Micro-electro-mechanical Systems (MEMS) Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion

  3. MEMS Fabrication Processes Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion DRIE Deep reactive-ion etching LIGA Lithographie, Galvanoformung, Abformung (Lithography, Electroplating, and Molding)

  4. Carbon-Nanotube-Templated Microfabrication Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion

  5. Carbon-Nanotube-Templated Microfabrication Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion

  6. CVI Using Metal Carbonyl Precursors Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion Heating Electrodes CNT Sample Cartridge Heater Gas Metal Carbonyl

  7. High Tensile Stress in Deposited Metal Film Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion 1 mm

  8. Extent of Infiltration Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion 200 μm 200 μm 200 μm 1 μm 1 μm 1 μm

  9. Structure of Metal film in CNT composite materials Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion The metal oxycarbide puts metal atoms in an FCC structure with C or O at their octahedral sites (Lattice constant of about 4.16Å) TEM Analysis Powder Diffraction

  10. Materials Properties of CNT composite materials Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion Cantilever Setup Young’s Modulus on the order of 10 GPa 4-Point Probe Setup via the Van der Pauw Method Resistivity on the order of 100 μΩm

  11. Conclusion Motivation CNT-M CVI Process CVI Challenges Materials Properties Conclusion • Versatile Process • High-Aspect-Ratio • Materials Properties Dominated By Filler Material

More Related