1 / 10

CCS main geological issues

CCS main geological issues. Storage capacity Injectivity Containment. Exposure of biosphere to the CO 2 stream and entrained substances: leakage pathways. Natural system – the geology Permeable cap rocks Fractures – faults, joints, etc. Corrosion of the rock matrix

asher
Télécharger la présentation

CCS main geological issues

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CCS main geological issues • Storage capacity • Injectivity • Containment

  2. Exposure of biosphere to the CO2 stream and entrained substances: leakage pathways • Natural system – the geology • Permeable cap rocks • Fractures – faults, joints, etc. • Corrosion of the rock matrix • Lateral transport to a point where there is no cap rock • Diffusion • Engineered system • Wells • Subsidence • Mines

  3. Processes that enhance leakage potential • Pore fluid pressure increase in the storage reservoir • Might induce or open fractures and faults • Transport of CO2 and formation brine due to pressure gradients in the reservoir • Transport of CO2 due to its buoyancy • Dissolution and transport of CO2 in the formation water by natural fluid flow • Chemical reactions caused by acid (CO2-saturated) formation water • corrosion of steel, cement and rock matrix

  4. Faults • Can be fluid conduits or barriers to fluid movement • Role can change through geological time, depending on stress regime • High pore fluid pressures could induce fluid movement through faults – need geomechanical modelling • Consider damage zone as well as actual fault plane • Many faults in the North Sea are sealing and prevent the migration of oil and gas

  5. Fault plane cemented by gypsum

  6. Damage zone • Fault plane cemented • Fractures caused by fault movement only partially cemented

  7. Fault seals • Depend on: • Cementation • Which rocks are juxtaposed • Fault smear (mudstones may be smeared along the fault plane) • Lithology • Pore fluid pressure in the reservoir • Geomechanical modelling can give some indication of the reservoir pore fluid pressures that might induce fault movement • Empirical knowledge helpful • Fisher & Knipe for North Sea

  8. Fluid movement through caprocks • Many caprocks (shales and mudstones) consist of tightly packed very small grains • They can have quite high porosity but they have very low permeability • Nevertheless, fluids can move through the connected pore spaces, especially if the reservoir and cap rock are saturated with a single fluid

  9. Caprock - capillary entry • An injected (non-wetting) fluid like CO2 has to overcome the capillary forces in the pore throats in order to enter and eventually pass through a cap rock – it must exceed the capillary entry pressure which can be measured • Otherwise CO2 will not escape from the reservoir hydrostatic pressure brine overpressure CO2 CO2 residual brine

  10. Geochemical issues • Corrosion of elements of the rock matrix by CO2/water mixtures • Carbonates dissolve early, basic aluminosilicates very slowly • Requires flux of acid formation water • Precipitation of minerals in the pore spaces of the reservoir rock • Stores carbon • ?injection problems unlikely – slow kinetics

More Related