1 / 9

Timing Belt Survey

Timing Belt Survey. 3 December 2008. Outline. Belt Types Polyurethane Metal Tension Measurement [2] Sonic Pencil. Belt Types. Polyurethane Lighter, lower inertia Deformation depends on load and speed High precision under lower loads and speeds Metal

ashotwell
Télécharger la présentation

Timing Belt Survey

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Timing Belt Survey 3 December 2008

  2. Outline • Belt Types • Polyurethane • Metal • Tension Measurement[2] • Sonic • Pencil

  3. Belt Types • Polyurethane • Lighter, lower inertia • Deformation depends on load and speed • High precision under lower loads and speeds • Metal • Heavier, potential problem with tracking and sagging • Little to no deformation • High precision[4]

  4. Polyurethane Belt • Self-tracking • BAT10 • Curved teeth • Equal power transmission • Reduced noise • SFAT10 • Displaced by ½ tooth • Reduced noise • Reduced polygonal effect

  5. Metal Belt • Solid Bush Chain • High precision solid bushes • Longer wear (1.2-4X) • Sintered Bush Chain • High precision solid bushes • Longer wear (1.2-4X) • Infrequent lubrication[4]

  6. Tension Measurement • Sonic type[3] • Transdev TSM4 • 7Hz to 400Hz • ±5% Accurate • $1000± • Gates 507C • 10Hz to 5000Hz • $800±

  7. Tension Measurement • Pencil type • A14Z 6-740176 • 30 lb load limit • $16±

  8. Recommendation • Shifted tooth polyurethane belt • Lighter weight • High precision at low relative speeds • Less backlash than regular belts • Pencil-type tension measurement • Much less expensive • Similar accuracy since the distance between pulleys is large

  9. References [1] W. Zhang, T. Koyama “Load Distribution of Metal Timing Belts. DOI: 10.1115/1.1326917. Transactions of the ASME, Page 98, Vol. 123, March 2001. [2] http://www.alliedbearings.com/new_prod/gates/belttension_testers.pdf [3] http://www.stockdriveproducts.com/D265/PDF/D265P1042.pdf [4] http://www.transdev.co.uk/pages/chain/did.htm

More Related