Download
1 / 100
1.02k likes | 1.25k Vues
Sperling (1960) Estimating the Duration of Iconic Memory: Delayed cues in the partial report method. Dr. Timothy Bender Psychology Department Missouri State University 901 S. National Avenue Springfield, MO 65897. Duration.
E N D
Sperling (1960)Estimating the Duration of Iconic Memory: Delayed cues in the partial report method Dr. Timothy Bender Psychology Department Missouri State University 901 S. National Avenue Springfield, MO 65897
Duration In the fourth experiment in Sperling’s (1960) classic study of the characteristics of the iconic memory (visual sensory memory), he explored how long the memory trace might last. He used the Partial Report Method with an added variable – He manipulated the timing of the cue.
Duration In the Partial Report Technique participants see an array of letters with two or more rows, but they are signaled as to which row of the array to report. Usually, the signal is a tone that occurs at the offset of the array.
Duration • In his fourth experiment, Sperling manipulated the timing of the cue. The timing levels included included • 100 milliseconds before the onset • With the offset • 150 milliseconds after the offset • 300 milliseconds after the offset • 500 milliseconds after the offset
Duration Sperling used both 2x3 arrays and 2x4 arrays. He also presented each different timing condition in a block of trials. Furthermore, the participants were exposed to two practice trials before each set of arrays. Therefore, the participants became used to each timing.
Duration As you might expect, the best performances were when the cue was just prior to the appearance of the array. The participants performed more poorly as the cued was delayed.
Duration We will do something similar. You will see several slides with auditory cues occurring at different times relative to the presence of the array. Like Sperling’s study, in this demo you will get each timing in blocks. However, the array will be a 3x4 array and the sequence of the target rows will be random.
In the first block, you will see 6 different 3x4 arrays of letters. Approximately 100 milliseconds before the array appears, you will hear a tone. A high tone means you should record the top row. A medium tone means you should record the middle row. And a low tone means you should record the bottom row. Duration
You will need to listen to the tones a few times in order to recognize which one is high, medium, and low. Duration Move the cursor over this speaker to hear the high tone. Move the cursor over this speaker to hear the medium tone. Move the cursor over this speaker to hear the low tone.
Duration • Procedure • After the next slide, you will see 6 stimuli. • Each stimulus will start with a slide telling you to get ready. Click on that slide to see the actual stimulus. • You will then see a + sign in the middle of the screen. Focus on the + sign. • The + sign will remain for about 1 second and will be followed by a 3x4 array of letters. • The array will last for about 70 milliseconds. • The tone will occur about 100 milliseconds before the array appears.
Duration Your job is to write down the letters in the row that corresponds to the tone. Record the 4 letters in their correct positions as quickly as you can. It is important that you write down a letter in every position, even if it feels like a guess. However, do NOT just write down all Xs or something like that. Also, do not try to predict which row will be cued. That actually may reduce your overall score.
Duration • Scoring • Give yourself one point for each letter in the correct location for all 6 stimuli. • Multiply that number by 3, because there were 3 rows possible. • Divide that number by 6 to get your mean score. • GSBQ 4 VSNF • SKBS 5 RPFD • CBFW 6 PVXR
In the second set, you will see 6 different 3x4 arrays of letters. The tone will occur just as the array disappears from the screen. A high tone means you should record the top row. A medium tone means you should record the middle row. And a low tone means you should record the bottom row. Duration
Duration • Procedure • After the next slide, you will see 6 stimuli. • Each stimulus will start with a slide telling you to get ready. Click on that slide to see the actual stimulus. • You will then see a + sign in the middle of the screen. Focus on the + sign. • The + sign will remain for about 1 second and will be followed by a 3x4 array of letters. • The array will last for about 70 milliseconds. • Then you will hear the tone.
Duration Your job is to write down the letters in the row that corresponds to the tone. Record the 4 letters in their correct positions as quickly as you can. It is important that you write down a letter in every position, even if it feels like a guess. However, do NOT just write down all Xs or something like that. Also, do not try to predict which row will be cued. That actually may reduce your overall score.
