1 / 54

Tech 46: Unit Three

Tech 46: Unit Three. TURNING MACHINES AND PROCESSES. Engine Lathe. Engine Lathe. Maudslay’s First Lathe. Maudslay’s Second Lathe. Jeweler’s Lathe. Massive or Heavy Duty Lathe. Massive or Heavy Duty Lathe. Toolmaker’s Lathe. Turret Lathe. Turret Head. Tracer Lathe. Turning Center.

basil-bird
Télécharger la présentation

Tech 46: Unit Three

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tech 46: Unit Three TURNING MACHINES AND PROCESSES

  2. Engine Lathe

  3. Engine Lathe

  4. Maudslay’s First Lathe

  5. Maudslay’s Second Lathe

  6. Jeweler’s Lathe

  7. Massive or Heavy Duty Lathe

  8. Massive or Heavy Duty Lathe

  9. Toolmaker’s Lathe

  10. Turret Lathe

  11. Turret Head

  12. Tracer Lathe

  13. Turning Center

  14. Parts of a Lathe

  15. Quick-Change Tool Holders

  16. Lathe Tool Holder

  17. Quick-Change Lathe Tool Holders

  18. Facing and Turning

  19. Turning Process

  20. Tailstock

  21. Tail Stock Turret

  22. Standard Tool Post & Tool Holder

  23. Cutting Tool Geometry

  24. Lathe Tools

  25. Lathe Tools

  26. Form Tools

  27. Lathe Threading Tools

  28. Cut-Off Or Parting Tools

  29. Center Drill

  30. Drilling

  31. Calculating Cutting Speeds • Cutting speeds (CS) are given is feet per minute. • Work speed is given in revolutions per minute (RPM). • Speed of work must be converted to RPM. • RPM = CS X 4/D • D = diameter of workpiece • CS = Cutting speed of particular metal

  32. Boring

  33. Facing and Turning

  34. Knurling Tools

  35. Knurling

  36. Taper Turning

  37. Lathe Work Between Centers

  38. 3- and 4-Jaw Chucks

  39. Centers

  40. Lathe Dog

  41. Lathe Collets

  42. Mandrels & Faceplates

  43. Lathe Attachments • Threading attachment • Taper attachment • Steady rest and follower rest attachments

  44. Lathe Threading

  45. Half Nut & Index Plate

  46. Taper Attachment

  47. Steady and Follower Rests

  48. Follower & Steady Rests

  49. Cross Slide

More Related