1 / 18

Personal Protective Equipment (PPE) For Electric Furnace Operation

Personal Protective Equipment (PPE) For Electric Furnace Operation. Glenn S. Aspholm Johns-Manville Corp Littleton, Colorado October 24, 2005. JM Melting Operations. Gas-Oxy Gas-Oxy w/ Electric Boost SORG Technology Modified Pochet-Style All-Electric Melters All-Electric Forehearths.

bernad
Télécharger la présentation

Personal Protective Equipment (PPE) For Electric Furnace Operation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Personal Protective Equipment (PPE) For Electric Furnace Operation Glenn S. Aspholm Johns-Manville Corp Littleton, Colorado October 24, 2005 Glenn Aspholm

  2. JM Melting Operations • Gas-Oxy • Gas-Oxy w/ Electric Boost • SORG Technology • Modified Pochet-Style All-Electric Melters • All-Electric Forehearths Glenn Aspholm

  3. Additional Risks For Pochet Melters • Open Glass Streams • Operator Close to Melter – Open Glass Surface • Required to Probe Glass • Melter Level Measurement • Ladle-Check Glass Flow Measurements • Equipment Change and Maintenance Glenn Aspholm

  4. Additional Risks For Electric Forehearths • Infrequent Glass Level Measurement • Level-Gauge Calibration • Level-Gauge Failure • Upset Condition / Verification • Thermocouple Change • Low – Maintenance, Trouble-Free Operation • Forget the Risks !!! Glenn Aspholm

  5. In-Scope • General Operator Duties • Glass Level Measurement (Melter) • Glass Level Measurement (Forehearth) • Glass Pull Rate Measurement (Ladle Checks) • Thermocouple Change - Forehearth Glenn Aspholm

  6. Out-Of-Scope • Electrical / Mechanical Maintenance • High-Voltage / Low-Voltage Electrical Work • Emergency Conditions • If in doubt, Lock it Out !!!! • Not a replacement for proper Lock-out/Tag-out Procedures Glenn Aspholm

  7. Melter Level Measurement Glenn Aspholm

  8. Open Glass Stream Glenn Aspholm

  9. Electric Forehearth Glenn Aspholm

  10. Risks Around Electric Melters/Forehearths • Thermal (Burn) • Abrasion (Cut / Scrape) • Contact with Molten Glass • Low Voltage Electrical • High Voltage Electrical Glenn Aspholm

  11. Melter and Forehearth Electrical Potential • Melter - < 100 V AC • Forehearth - 50 – 100 V AC Glenn Aspholm

  12. Burn / Abrasion PPE • Bump Caps / Hard Hats • Proper Clothing • Leather Gloves • High – Temperature Clothing and Gloves • Head Protection and Faceshield Glenn Aspholm

  13. Low Voltage Electrical Shock Risks • Electrical Shock – Injury / Death • Secondary Injury – Reaction from Electric Shock • Fall • Burn • Head Injury • Laceration/Abrasion/Fracture Glenn Aspholm

  14. New Requirement - Use of Linesman’s Gloves and Protectors for Normal Operator Functions Glenn Aspholm

  15. Available Linesman’s Gloves Glenn Aspholm

  16. Lineman’s Glove Info • Di-Electric Rubber Construction • Seamless • ASTM D120 Specification • Must be tested and certified every 6 months Glenn Aspholm

  17. Current Specified Equipment • 00 Linesman’s Gloves • Leather Protectors • Order proper sizes – Probably oversized • Cost - Approx $75/set (Glove + Protectors) • 6-Month Certification Required • Pay Certification cost • Replace after 6 months • Source of Information - McMaster-Carr Catalog Glenn Aspholm

  18. Questions ??? Glenn Aspholm

More Related