1 / 15

NC1131-3

NC1131-3. POU’s & tasks Each POU must be associated to Task Function Block can include more Function Blocks inside. NC1131-3. Online debugger RED: TRUE BLUE: FALSE GREEN: values BLACK: constant. NCDef. Link between variables and keypad layout. NCDef. Uses *.MDB -file (Access Database)

beulah
Télécharger la présentation

NC1131-3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NC1131-3 • POU’s & tasks • Each POU must be associated to Task • Function Block can include more Function Blocks inside

  2. NC1131-3 • Online debugger • RED: TRUE • BLUE: FALSE • GREEN: values • BLACK: constant

  3. NCDef • Link between variables and keypad layout

  4. NCDef • Uses *.MDB -file (Access Database) • parameter definitions • monitoring value definitions • text -definitions • keypad layout

  5. NCDef PARAMETER DEFINITIONS VARIABLE GROUPS KEYPAD LAYOUT

  6. NCDef TEXT: SELECTED FROM A LIST OR FREE TEXT LIMITS DISPLAY FORMAT SPECIAL TASK, IF NEEDED INDIVIDUAL ID NUMBER PARAMETER CLASS, E.G. APPLICATION, MOTOR,...

  7. NCDrive • To set parameters • To save, load and compare parameter sets • Graphical monitoring with trigger settings • max. 1000 samples • sampling interval 50ms - 1.2s,

  8. NCDrive

  9. NCDrive

  10. NCLoad • NCLoad is tool to download • Applications • System program • Option card program

  11. NCLoad • 1 vcn -file includes: • 1 or more application(s) • system software and application(s) OR • expander board software

  12. NCDebug • Is used to watch and edit application variables and firmware interface variables

  13. Application Naming on NX Example: Lift Application is ASFIFF08or with revisionASFIFF08V109

  14. NX product - Application ID • AS FI FF08 V101 • Name has four sections • AS= device type AL,AS,AP … (NXL, NXS, NXP) • NXS application will work also in NXP • FI = application development center (country) • FF08 application identifier • V101 application revision (V1.01)

  15. Training for NC1131-3 Tool • The new tool is available for everyone who has a need to make special applications • For more information ask you area manager or from application team • application.team@vacon.com

More Related