102 likes | 110 Vues
BHM Geotechnical is a full-service engineering, geotechnical and environmental firm. BHM was established to meet the industry demand for efficient, cost considerate routine assessments, whilst also being able to offer highly technical analysis and comprehensive solutions to complex challenges.
E N D
Know Everything About Geotechnical Report and the Cost Of Soil Testing info@bhmgeo.com.au (02) 8324 1412 Level 25 88 Phillip Street Sydney NSW 2000
Geotechnical Report means… You may think of building a new home or an office on land about which you don’t have any idea. So it is very important to have a clear idea about the soil on which the building is built. It will help you to decide whether the particular soil is suitable for your building or not. All these details about the soil and land is mentioned in a special report called a geotechnical report which is then used by the contractor till the completion of the construction process.
What does a Geotechnical Report offer? The geotechnical report describes a detailed analysis of chemical and geotechnical properties of your soil. Some of the findings included in the report are: What type of soil is it? Some Geological data Details about strength and density of the soil Seismic design factors Foundation Design recommendations Solution to some foreseen problems
What does a Geotechnical Report offer? Out of all these most important factors is identification of the type of soil as building construction is hugely dependent on the type of soil present on the land. Also some recommendations about the design of the building are given in the report. Some problems related to construction are predicted in the report itself and solutions to those are also provided.
What to do if soil is indicated as Bad? The best solution to this is to consult an expert geotechnical engineer who can provide solutions to your problem after geotechnical site investigation. Some most commonly recommended solutions are Installing wider,thicker or deeper footings Dig out pockets of bad soil and replace them with engineered fills Alternate forms of cement to counter corrosive effects
Expected Cost of Soil Testing Fixing slope of the land to prevent structure sliding Also some recommendations are mentioned in the geotechnical report regarding the design of the building.So it is important to share it with the structural engineer and working inspector of the project in order to notify them.
The cost of the soil testing depends on the complications of the land size. In most of the cases soil is tested before the digging process. However, in some rare cases the testing is also done after the digging process. So for testing before the digging process geotech in Sydney approximately costs around $3000-$5000 which is quite an expensive process. But the perks and importance of this process is very much in context to construction so people tend to do it without any second thought. Now the cost for testing after the digging process is around $300-$1000 which is very low compared to that of before digging. The reason for that is the very less importance of soil testing after the digging process.
Make sure the environmental engineering company you are hiring is well established. With Geotechnology Consultant in Sydney Build on Stronger Grounds 4 Advantages of Associating With The Right Environment Engineering Companies Importance of Hiring the Geotechnical Engineers for the Perfect Solutions