1 / 46

GAS / FLAME DETECTION GAS / DUST MONITORING

GAS / FLAME DETECTION GAS / DUST MONITORING. YOUR ENVIRONMENT,YOUR SAFETY, LET ’S MASTER THEM TOGETHER. MX48 = 4 or 8 independant channels. MX 15= single channel. MX52 = 2 to 16 independant mixted channels. MX32 = 2 independant channels. WINGAS = 4 independant channels.

blaze-berg
Télécharger la présentation

GAS / FLAME DETECTION GAS / DUST MONITORING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GAS / FLAME DETECTION GAS / DUST MONITORING YOUR ENVIRONMENT,YOUR SAFETY, LET ’S MASTER THEM TOGETHER

  2. MX48 = 4 or 8 independant channels MX 15= single channel MX52 = 2 to 16 independant mixtedchannels MX32 = 2 independant channels WINGAS = 4 independant channels redundant system MX62 = Up to 64 independant channels MX42A = 4 independant channels

  3. Measurement and alarm unit:MX 15

  4. small-sized wall-mounted box For low cost installations (boiler plants, battery charging rooms…) DIN rail mounting… MX 15:easy installation

  5. Measurement and alarm unit:MX 15 • Synergy with new detectors OLC(T) 10 • Can be linked either with a single flammable detector (OLC10/OLCT10) • Or can be linked with two flammable detectors ( OLC10 TWIN) • Or can be linked with one up to five toxic transmitters OLCT10 ( CO, NO, NO2).

  6. Example of wiring arrangement between MX15 and 3 -active- wire- detector: OLC10 or OLCT10.

  7. between MX15 and two flammable detectors:OLC10 TWIN.

  8. between MX15 and two toxic transmitters OLCT10.

  9. MX 15 : user-friendly front panel LCD display, pictograms, concentration, type of gas and unit indication (programmable). • - LED visual indications: • ON/OFF • AL1 and AL2 • Trouble

  10. ALARMS : 2 independent programmable levels Increasing or decreasing alarm Automatic or manual, local or remote acknowledgement. RELAYS: 2 independent alarm relays 1 fault relay Fail safe (energized) or negative safety Free potentiel contacts (2A/250ACV). MX 15 :alarms and relays

  11. MX15 : simple operation • Keypad for using (menus): • initialization (1rst installation) • programming (of channel) • test (relays inhibited during calibration) • code (authorized people) • buzzer (mode).

  12. small-sized wall-mounted box protected front face IP66 housing. MX 32:easy installation

  13. Per channel: 1 independent relay for each gas alarm (2) 1 common relay for troubles. MX 32: relays 1 1 D 2 2

  14. maintenancemenus: initialization (1st installation) channel programming calibration (relays inhibited) Code (authorized people) buzzer ( local audible alarm). MX 32:keypad

  15. Wall-mounting housing: easy to install 1 to 4 independent channels MX 42A

  16. MX 42A : ergonomic front panel

  17. MX 42A:relays COMMON BLOCK channel 3 channel 4 channel2 Channel 1 D 3 1 2 1 2 1 2 1 2 - per channel: 1 independent relay per instantaneous gas alarm (2) - 1 common relay for the 3rd gas alarms (from each channel), or for all the gas alarms - 1 common fault alarm relay

  18. MX 42A:analog outputs COMMON BLOCK 3 4 2 Channel 1 • recorder or PLC or • data logging. 4 - 20 mA - - - - + + + + Common ground an independent 4-20 mA output per channel.

  19. MX 42A:programming

  20. MX 42A:maintenance switches : 6 7 8

  21. Position 0 = OFF position 1 = ON 8 = on/off 7 = calibration (flashing yellow LED and alarm relay - inhibition) 7 + 6 = programming (flashing yellow LED and alarm relay - inhibition) . Maintenance switches 0 1 6 7 8

  22. 8 + 7 = : calibration « 0 and Span » setting with potentiometers Maintenance switches: calibration 7 8

  23. 8 : normal mode 7 + 6 = programming KEYBOARD Call on display (for 1 mn) Messages : - AL1 - AL2 - AL3 - Point - Time - + - states - values ...

  24. WINGAS MULTI-CHANNEL CONTROLLER

  25. WINGAS • WINGAS is a fixed controller : • with a wall mounting housing IP 54 • for COMMERCIAL and INDUSTRIAL markets.

  26. WINGAS : 2 versions • WINGAS DIGITAL: with display • WINGAS : without display

  27. WINGAS :multi-channel controller • 4 channels • 1 transmitter 4/20 mA2 or 3 wires per channel • specific case : up to a maximum of 5 transmitters CO 4/20 mA 2 wires • No explo bridge detector .

  28. 123456 6 fils Vers boîte relais WINGAS : configuration FRONT PANEL CASING Display Pcb MAIN Pcb

  29. WINGAS : ALARMS • 2 GAS alarms per channel COMMON FAULT ALARM

  30. WINGAS : on-board RELAYS • 2GAS alarm common relays • 1buzzer copy common relay • 1FAULT alarm common relay

  31. WINGAS: FRONT PANEL Gas alarm lamps On/off lamp Fault lamp Acknowledgement button Display (digital version ) Maintenance button

  32. WINGAS DIGITAL • Only in the case of a WINGAS DIGITALwe can connect a remote box fitted with 8 relays • Each gas alarm AL1 and AL2 of WINGAS DIGITAL will then drive 2 remote relays AL1 and AL2.

  33. REMOTE BOX • The remote box is connected to the wingas digital with a 6 wire cable : max. length = 30m (0.9mm2). to wingas digital

  34. WINGAS NETWORK Network: up to 32 WINGAS maximum

  35. WINGAS NETWORK • The network WINGAS RS 485 is driven by a software: WINGASCOM • It allows to visualize and program the differentWINGAS connected to the network

  36. Metal wall- mounting housing 4 to 8 independent channels. MX 48

  37. BUS/MICRO/display card common block 2 cards (4 channels per card) MX 48 : presentation

  38. MX 48: front panel • AL 1 and AL2 = instantaneous alarms • AL 3 = delayed or averaged alarm

  39. MX 48 :relays - 2 common relays (Al3 and faults) - 2 relays (Al1/Al2) per channel channels 1 to 4 5 to 8

  40. Analog outputs: 4 to 20 mA -an independent 4 /20 mA output per channel : to recorder, PLC ....

  41. communications: RS 232 and RS 485 COMMUNICATION COM 52 < < < RS 232 < < < < < < > > > RS 485 SUPERVISION > > > >

  42. with push-buttons : calibration programming MX 48 : maintenance

  43. MX 52 - rack 3U/19 inc. - 2 to 16 channels ( features of MX 48 = MX 52 ).

  44. MX 52 : configuration

  45. a safety system ... MX 62

More Related