1 / 5

Cavity simulator power supply module

Cavity simulator power supply module. Mateusz Lipiński. Specification overview. 15-28V DC input 8 separate DC outputs: 6 x 12V 2A 2 x 12V 7A 312W total All outputs can be electronically switched on/off Output monitoring and control with I2C bus Case and board temperature control.

brendawilson
Télécharger la présentation

Cavity simulator power supply module

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cavity simulator power supply module Mateusz Lipiński

  2. Specification overview • 15-28V DC input • 8 separate DC outputs: • 6 x 12V 2A • 2 x 12V 7A • 312W total • All outputs can be electronically switched on/off • Output monitoring and control with I2C bus • Case and board temperature control

  3. Done: Circuit design and testing • Part selection and single channel schematics design • Designing output switch experimental PCB • One channel assembly using evaluation boards, laboratory equipment and experimental PCB.

  4. Now: Main PCB

  5. Future... • System test • Measurements • Programming • Writing thesis

More Related