1 / 14

RightFax and Cisco

RightFax and Cisco. F. Cisco Unity Fax Solutions: Unity Fax Server. Remote Access. Exchange Message Store. Cisco Unity Messaging Server. Cisco Unity Fax Server. PSTN. E1/FXS. T.38. Cisco Call Control Server. Web Client. Outlook Client. Outlook Client. 4 Port Analog Card

brian-hammond
Télécharger la présentation

RightFax and Cisco

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RightFax and Cisco

  2. F Cisco Unity Fax Solutions: Unity Fax Server Remote Access ExchangeMessageStore CiscoUnity MessagingServer CiscoUnity FaxServer PSTN E1/FXS T.38 Cisco CallControl Server Web Client Outlook Client Outlook Client

  3. 4 Port Analog Card No IP support Full size PCI Card 8,16,24,32 Port E1/T.38 Used in E1 or T.38 Mode Full size PCI Card Ethernet and E1 Ports Brooktrout Fax Boards E1 RJ45 (4xAnalog) Ethernet

  4. F Unity Fax Server TR1034 TDM Configuration Remote Access MCSServer • When operating in TDM the Fax Server uses E1 for Fax reception • Application access is via MCS Network Interface • Can be used in a TDM/IP migration Q.931 E1 |||| PSTN BrooktroutTR1034T38 Card E1/FXS PBX or Router |||| IP Network MCS built-inLAN

  5. F Unity Fax Server TR114 Analog Configuration MCSServer • When operating in T.38 mode the Fax Server uses two network connections • SIP and Application access on MCS Network Interface • RTP/Media is sent to Brooktrout Ethernet Interface E1/FXS E1 PSTN |||| RouterPOTS Dial-peer for Fax BrooktroutTR114 SIP |||| MCS NetworkCard

  6. RTP F Unity Fax Server TR1034 T.38 Configuration Remote Access MCSServer • When operating in T.38 mode the Fax Server uses two network connections • SIP and Application access on MCS Network Interface • RTP/Media is sent to Brooktrout Ethernet Interface E1 |||| PSTN RTP BrooktroutTR1034T38 Card E1/FXS SIP SIP |||| Router(T.38dial-peer pointsat MCS Network Card) MCS NetworkInterface

  7. F Unity Fax Server TR1034 T.38 Configuration • In this network we want route fax calls from the fax to the CFS server using SIP • We want to route all 4 digit DNs starting with 5 to the CFS • We need to build dial peers in the router to achieve this Cisco Fax Server (CFS) IOS Router FaxDN=8000 8000 5xxx DN=5xxx FXS .207 .208 .254 10.1.1.0/24

  8. Basic Router Configuration hostname Voice_gateway enable password cisco interface FastEthernet0/0 ip address 10.1.1.254 255.255.255.0 duplex auto speed auto no shut line vty 0 4 exec-timeout 120 0 password cisco login Set Host Name Enable Password Ethernet Interfaceconfiguration Telnet Configuration

  9. PSTN to IOS Inbound Config VOIP Dial Peer Tag dial-peer voice 5000 voip description Cisco Fax Server Calls destination-pattern 5... session protocol sipv2 session target ipv4:10.52.200.207 session transport udp codec g711ulaw fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco Destination Patternto match Specify SIP as call control protocol IP address of RF Server (NOT BT Card) Configure SIP to use UDP packets Set the default codec for this dial-peer Set Fax relay mode to T.38 Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection

  10. F Unity Fax Server TR1034 T.38 Configuration • We want to route all 4 digit DNs starting with 8 to the PSTN • We need to build dial peers in the router to achieve this Cisco Fax Server (CFS) IOS Router FaxDN=8000 8000 5xxx DN=5xxx FXS .207 .208 .254 10.1.1.0/24

  11. PSTN to IOS Inbound Config POTS Dial Peer Tag dial-peer voice 8000 pots destination-pattern 8... no digit-strip port 1/0/0 dial-peer voice 1 voip description generic incoming dial-peer incoming called-number .T codec g711ulaw fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco Destination Patternto match Specify SIP as call control protocol Inbound VOIP dial-peer Match all in boundVOIP Calls Set the default codec for this dial-peer Set Fax relay mode to T.38 Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection

  12. F Unity Fax Server Call Manager Deployment Multi-FunctionDocument Device EmailClient FaxClient PSTN @ WWW SIP(T.38) H.323 Cisco CallManager Cisco Fax Server MessagingServer Cisco UnityServer

  13. F Unity Fax Server TR1034 T.38 Configuration • If we need to also route calls to a Cisco Call manager we add a H.323 dial-peer to the router Cisco Fax Server (CFS) IOS Router FaxDN=8000 8000 5xxx DN=5xxx FXS 2xxx .207 .208 .254 .201 10.1.1.0/24 IP Phones Call Manager

  14. PSTN to IOS Inbound Config POTS Dial Peer Tag dial-peer voice 2000 voip description Dial-Peer to Call manager destination-pattern 2... session target ipv4:10.52.200.201 codec g711ulaw Destination Patternto match IP Address ofCall Manager Set the default codec for this dial-peer Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection

More Related