1 / 17

ECE 345 - Senior Design Project

ECE 345 - Senior Design Project. A Better Uninterruptible Power Supply (UPS) Jason Fontaine Jon Rasmussen. Why a better UPS?. Simplification of AC/DC conversions Less conversions leads to higher efficiency Increased speed and reliability Direct input into a computer’s power supply.

bronson
Télécharger la présentation

ECE 345 - Senior Design Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE 345 - Senior Design Project A Better Uninterruptible Power Supply (UPS) Jason Fontaine Jon Rasmussen

  2. Why a better UPS? • Simplification of AC/DC conversions • Less conversions leads to higher efficiency • Increased speed and reliability • Direct input into a computer’s power supply

  3. How the design operates • Direct DC from UPS to power supply eliminates one DC/AC and one AC/DC conversion • Diode provides nearly instantaneous switching • Backup power always present behind diode

  4. System Diagram 120 V AC Source 10:1 Transformer Rectifier/ Battery Charger DC/DC (Flyback) Converter 12 V Battery 360 V DC output Diode DC Bus of PC Power Supply

  5. Rectifier/Charger • 12 V, 20 A battery • Similar to common motorcycle battery • Battery tolerant to input variations • Rectified signal can be rough • Charging time a non-issue • Battery under constant charging

  6. Rectifier/Charger Circuit

  7. Gate Drive • Using Pulse Width Modulation IC • UC 3843 PWM • Frequency Control • 10 kHZ - 500 kHZ • Duty Ratio Control • 0 % - 100%

  8. Gate Drive Circuit

  9. Why the Flyback Converter? • DC/DC Converters function like AC transformers • Can use single input to supply several different output voltages • Offer high degree of efficiency • Ability to create a larger “boost” • Turns ratio vs. duty ratio • Less demand for duty ratio accuracy • Does not require a common ground • Provides an isolated output

  10. Flyback Converter Circuit

  11. Project Specifications • AC Source Input Voltage: 120 V AC • DC Source Input Voltage: 12 V DC • DC Output Voltage: 326 V DC • Output Power: 240 Watts • Output Ripple: <5% • Input frequency: 50kHz • DC Source Input Current: 20 A DC • Output Current: 0.74 A DC • Converter Efficiency: >85%

  12. Expected cost parts $30 Expected cost time 140 hrs $8750 Grand total expected $8780 Actual cost parts $69 Actual cost time 144 hrs $9000 Grand total actual $9069 Cost and Time Analysis

  13. Project Conclusions • Performance • Achieved correct design • Circuit behavior acceptable (at low output power) • Budget • Reasonable end total • Must allocate research funds in future

  14. Post Project Conclusions • Ideal design well understood • Realized impact of non-ideal effects • Implementation far more difficult than anticipated • Learned value of design simulation

  15. Project Future • Resolve temperature effects • Reduce inductor size • Package the circuit, add interfaces • Direct tap into DC bus of PC power supply • Provide backup power for display

  16. Future for Project Team • Arkansas Valley Electric Co-op • Ozark, Arkansas • The RMH Group • Denver, Colorado

  17. Now we’re finished!!

More Related