1 / 20

7-2 : Concentration & Solubility

7-2 : Concentration & Solubility. Science Standard 8.5.a: Students know physical processes including freezing and boiling, in which a material changes form with no chemical reaction. . California Standards.

bryony
Télécharger la présentation

7-2 : Concentration & Solubility

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 7-2: Concentration & Solubility Science Standard 8.5.a: Students know physical processes including freezing and boiling, in which a material changes form with no chemical reaction.

  2. California Standards • Science Standard 8.5.a: Students know physical processes including freezing and boiling, in which a material changes form with no chemical reaction.

  3. Input • See vocab sheet

  4. Input & Modeling Concentration • To measure concentration, you compare the amount of solute to the total amount of solution. • A concentratedsolutionhas a lot of solute dissolved in a certain amount of solvent. • You can make it more concentrated by adding solute or taking away solvent • A dilutesolutionhas only a little solute dissolved in a certain amount of solvent. • So to dilute a solution you add more solvent • Concentration can be measured as the percent of solute in solution by volumeormass.

  5. Input & Modeling Calculating a Concentration • To calculate the concentration of a solution, compare the amount of solute to the amount of solution and multiply by 100 percent. • For example, if a solution contains 10 grams of solute dissolved in 100 grams of solution, then its concentration can be reported as 10 percent.

  6. Input & Modeling Practice Problem A solution contains 15 ounces of solute dissolved in 60 ounces of solution. What is the concentration of the solution? Calculating a Concentration 15/60 = 0.25 25%

  7. Input & Modeling Solubility • You can identify a substance by its solubility because it is a characteristic property of matter. • Solubility is a measure of how much solute can dissolve in a solvent at a given temperature. • If you can continue to dissolve more solute, you still have an unsaturatedsolution. • If no more solute will dissolve, you have a saturatedsolution.

  8. Input & Modeling Factors Affecting Solubility • Factors that affect the solubility of a substance include pressure, the typeofsolvent, and temperature. • An increaseinpressure increases the solubility of gases. • Ionic and polar compounds usually dissolve in polar solvents – “likedissolveslike” • The solubilityofmostsolidsincreases as temperature increases. • Gasesbecomelesssoluble in a liquid when the temperature of the liquid goes up.

  9. Input & Modeling Factors Affecting Solubility • Pressure • Shaken bottle of soda • “like dissolves like” • Soap and water cleaned with water based paints • Oil paints cleaned with turpentine • Temperature • Solid • Rock/crystal candy (have to heat water up to add more sugar in it and then cool to get sweet candy) • Gas • Warm soda going flat faster (Carbon dioxide escapes faster)

  10. Input & Modeling Temperature and Solubility The solubility of the compound potassium nitrate (KNO3) varies in water at different temperatures.

  11. Input & Modeling Temperature and Solubility Reading Graphs: At which temperature shown in the graph is KNO3 least soluble in water? KNO3 is least soluble at 0ºC.

  12. Input & Modeling Temperature and Solubility Reading Graphs: Approximately what mass of KNO3 is needed to saturate a water solution at 40ºC? Approximately 65 g of KNO3 are needed to saturate a water solution at 40ºC.

  13. 7-3: Describing Acids & Bases What are the properties of acids and bases? Science Standard 8.5.e: Students know how to determine whether a solution is acidic, basic, or neutral.

  14. Anticipatory Set What do these two things have in common? They both have a sour taste because they contain acids.

  15. Input • See vocab sheet

  16. Input & Modeling Properties of Acids & Bases • An acid tastes sour, reacts with metals and carbonates, and turns blue litmus paper red. PROPERTIES: • Sour Taste • Scientist do not use this one to test- too dangerous • Reaction with metals • Acids react with some metals (magnesium, zinc, iron) to produce hydrogen gas • Acids are corrosive

  17. Input & Modeling Properties of Acids & Bases PROPERTIES: • Reaction with carbonates • When mixed with acid it will produce carbon dioxide (gas) • Geologist use this to identify limestone (since it contains carbonates) • Reactions with indicators • Litmus paper is an example

  18. Input & Modeling Properties of Acids & Bases • A base tastes bitter, feels slippery, and turns red litmus paper blue. • COMMON Bases= calcium and sodium hydroxide, and ammonia Properties • Bitter taste • Slippery feel • Be careful touching bases- they can burn your skin • Reaction with indicators • Bases turn Blue

  19. Input & Modeling REMEMBER…

  20. Input & Modeling Uses of Acids & Bases • Acids and bases have many uses around the home and in industry. You can find acids and bases everywhere! • Vitamins (A) • Fertilizers(A) • Car batteries (A) • Cleaning products (B) • Baking soda (B) • Baking soda reacts with acid (such as buttermilk) and creates gases to make things light and fluffy • Mixing cement (B)

More Related