1 / 8

Aftertreatment Lamps- Level 1

Aftertreatment Lamps- Level 1. DPF Lamp On solid at Level 1 soot loading Label says : “Exhaust filter regeneration required.” “Drive on highway at highway speeds OR start Parked Regeneration to prevent loss of engine power.”. Aftertreatment Lamps- Level 2. DPF Lamp

buffy
Télécharger la présentation

Aftertreatment Lamps- Level 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Aftertreatment Lamps- Level 1 • DPF Lamp • On solid at Level 1 soot loading • Label says : • “Exhaust filter regeneration required.” • “Drive on highway at highway speeds OR start Parked Regeneration to prevent loss of engine power.”

  2. Aftertreatment Lamps- Level 2 • DPF Lamp • Flashes at Level 2 soot loading • Label says: • “Exhaust filter full” • “Pull vehicle safely off roadway and start Parked Regeneration to prevent loss of engine power.”

  3. Aftertreatment Lamps- Level 3 • Amber Warning Lamp is on • Audible alarm is on • Warn Engine text on LCD • DPF Lamp Flashes • Label says: • “Exhaust filter full. Engine performance LIMITED.” • “Pull vehicle safely off roadway and start Parked Regeneration to prevent engine stopping.”

  4. Aftertreatment Lamps- Level 4 Stop Engine Lamp is on • DPF Lamp is off • If not preceded by level 1, 2, & 3 warnings, it is on for an engine issue other than DPF plugging • Audible alarm is on • Label says: • “A serious engine problem has occurred. Exhaust filter may be overfull. Engine may SHUTDOWN soon.” • “Pull vehicle safely off roadway, turn on flashers, place warning devices STOP ENGINE. Seek service immediately.

  5. Other emission-related faults Malfunction Indicator Lamp (MIL) is on • Will turn on if DPF sensor faults are detected – or for other emission-related faults • Fault codes will be present • Lamp will not flash • May still step through DPF levels with the appropriate warnings • Attempting to perform a stationary regeneration will not change lamp status

  6. HEST Lamp High exhaust system temperature (HEST) Lamp • Turns on if exhaust temps exceed 400˚ C and vehicle speed is less than 5 MPH • Turns off when exhaust is below 370˚ C • High temperatures could be due to passive or active regen. • Label says: • “Exhaust components and exhaust gas are at extremely high temperatures. When stationary, keep away from people and flammable materials, vapors, or structures or STOP ENGINE.

  7. Driver Interface – Parked Regen • Pre-Set Conditions • - Parking Brake Set • Transmission in Neutral • or Park See_Visor For_Info • Desired Response • - Push PARKD REGEN switch • - Driver goes “Hands-Off” • No accelerator pedal input • No brake pedal input • No clutch pedal input • - Engine ECU takes control Decreasing Soot Load

  8. Medium Duty Product Emission Visor Decal

More Related