1 / 11

Beam spot size measurements

Beam spot size measurements. A. Fisher & W. Kozanecki See details in PEP-II e-logbook, 25 Apr 06 day shift. Single-beam & IP beam size measurements  scans at moderate currents (to minimize beam-beam effects) simultaneously measure beam sizes @ HER & LER SLM, interferometer & SXM

cale
Télécharger la présentation

Beam spot size measurements

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Beam spot size measurements A. Fisher & W. Kozanecki See details in PEP-II e-logbook, 25 Apr 06 day shift • Single-beam & IP beam size measurements •  scans at moderate currents (to minimize beam-beam effects) • simultaneously measure beam sizes • @ HER & LER SLM, interferometer & SXM • both in collision and in single-beam mode • with (almost?) the same lattices as characterized on 21/22 Apr 06 • will then use R-matrices derived from MIA data of 21-22 Apr to estimate HER & LER IP beam sizes, using  measurements as a constraint • Calibration of HER SLM scale using local closed-orbit bump

  2. Beam conditions standard by-2, 1722 bunches I- / I+ = 535/230 mA (.31/.13 mA/b) 1 round of tune optimization in collision before beam-bean scans Data files: PHYSICS5_DATA [pep2.ip.witold.spr06]*25Apr [pep2.char.25apr06] (FJD, MS, JT, GY)  scans

  3. e+ only Stable collisions e- only Beam currents & luminosity current Lsp Hcurrent

  4. e+ only Stable collisions  SLM X interf Y SXM X SXM Y

  5. Stable collisions e+ only Stable collisions Stable collisions e- only e- only x-tilt & HER  SXM  HSLM X Hinterf Y

  6. Beam size measurement summary Spot size data: LUMSIZ_2B_25AprLER & HER dispersion: 21 Apr 06 characterization

  7. Data files: HSLM_XCALIB_2_25APRHSLM_YCALIB_1_25APR HER SLM calibration • Two steps • SLM response vs. knob: d centroid_x, y / d Knob_x, y • x: 0.840 y: 0.850 (d SLM / d knob) • knob calibration wrt BPMs using orbit fit • x: 0.952 y: 0.982 (d OrbFit / d kknob) Overall: x (y) measured / true = 0.882 (0.867) • Note that this vertical calibration applies to the HER SLM only, NOT to the corresponding interferometer

  8. Spares

  9. Bump closure & orbit fits at HER SLM for a 0.5mm bump

  10. SLM/interf off-diagonal response X scan: Y centroid Y scan: X centroid X scan: Y size Y scan: X size

  11. Dispersion at HER & LER SLM/SXM HER SLM LER SXM

More Related