1 / 8

IMPROVED SEABED ANCHORING TECHNOLOGY

Discover the innovation and opportunity identified at the PROTTEC Retreat in October 2010 for improved seabed anchoring technology. Explore the potential use of subsea tooling for renewable energy arrays, reducing costs and increasing mooring flexibility.

camie
Télécharger la présentation

IMPROVED SEABED ANCHORING TECHNOLOGY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IMPROVED SEABED ANCHORING TECHNOLOGY Innovation Opportunity Identified at PROTTEC Retreat 26/28 October 2010 Jonathan Williams, Marine South East

  2. Basic Ideas • Permanent seabed anchors are expensive, eg for: • Offshore platforms • Renewable energy arrays • Conventional installation is based on techniques developed on land • Piling/drilling • Require expensive vessels • Can we envisage a novel approach, particularly for renewable energy arrays? • Using subsea tooling, based on experience with similar seabed vehicles (at SuperCAT)? • MSE has performed further analysis to explore this possibility

  3. Current Practice - Shallow • Piled from jack-up barge: • Expensive (>€100k/day) • Depth limited (~35m) • Subject to weather & scheduling delays • Gravity base: • Mainly for moored devices • Limited load capacity • No ‘pull-out’ capacity

  4. Current Practice - Deep • Torpedo pile: • Developed to moor FPSOs • Avoids use of expensive rig • Depends on seabed type & sufficient water depth • Drill & grout • Requires very expensive drill ship • Gravity base: • As for shallow water

  5. Concept • Remote tooling to deploy on seabed • Explosive anchors pinning an anchor plate? • Marinise techniques used successfully on land • Horizontal & vertical load capacity • Increased mooring flexibility

  6. Market Analysis • Offshore wind (deeper water >35m) • Floating turbines (egHywind) with mooring • Tripod/quadripod • €0.5M per installed MW (Gifford) for 15GW equals €7.5B market (but cost reduction will be essential!) • Wave & tidal (floating devices) • Mooring systems need lots of anchors • EgPelamis = 1 anchor per 250kW • Moored devices for 40% of EU target (5GW by 2020) equals 8,000 anchors • €125k per anchor (estimate) equals €1B market • 35-50m water depth is priority for continental shelf renewable energy arrays

  7. Potential Concerns • Environmental noise impacts • Need risk assessment • Faster installation = less duration of impact • Easier limiting to less sensitive seasons

  8. Science & Engineering Status • Foundations & moorings identified as priority by Energy Research Centre (Edinburgh) • Substantial modelling capability in foundation geotechnics • Extensive engineering capability in seabed remote operations & tooling • Strong scientific competence in ecosystem risk assessment

More Related