1 / 8

SLS - Selective Laser Sintering

SLS - Selective Laser Sintering. Rapid Prototyping Carnegie Mellon Andy Sadhwani. Selective Laser Sintering (SLS). Manufacturing Technique Made with Plastic/Elastomer Powder Sample built layer by layer Horizontal Slide with Fixed Vertical Movement Powder stays on table

carla-wynn
Télécharger la présentation

SLS - Selective Laser Sintering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani

  2. Selective Laser Sintering (SLS) • Manufacturing Technique • Made with Plastic/Elastomer Powder • Sample built layer by layer • Horizontal Slide with Fixed Vertical Movement • Powder stays on table • Filetype ‘.stl’ used - structural triangle language • Finished sample cools for 12-24 hrs then pulled out of Powder

  3. SLS Machine

  4. SLS Powder

  5. SLS con’t • Powder • Nylon-11 • For High Strength and Elasticity • Nylon-11 with 50% Glass Reinforcement • Nylon-12 • Finer Surface Quality but lower elasticity • Elastomer • Simulate Rubber-Like Products • Strain and Tolerances Available on Website

  6. SLS con’t • No Limitation to Maximum Size • Sintered Parts can be Glued Together Easily Providing High Strength • Single Part can be 30cm x 30cm x 60cm • Minimum Wall Thickness • 0.85 [mm] for PA11 • 1.00 [mm] for PA11-GF50 • 0.65 [mm] for PA12 • 0.60 [mm] for Elastomer

  7. Example of SLS Part (Drill)

  8. Contact Information • Mareco bv Rijnaakkade • www.marco.nl • Quotes Available through Email • Price Dependent on: • Height, Finishing, File Type • Quote Available in One Day • 1 Week to Manufacture Part

More Related