1 / 31

Aspen Reactors

Aspen Reactors. Amanda Hamilton, Jonathan Kalman, Harrison Kraus, Jenny Lam, Sophie Levy, Jacob Salem. Stoichiometry of Methane Steam Reformation. C x H y + x H 2 O + heat → x CO + ( x + y /2) H 2. Using natural gas/methane ( CH 4 ) for ease of explanation

carmenr
Télécharger la présentation

Aspen Reactors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Aspen Reactors Amanda Hamilton, Jonathan Kalman, Harrison Kraus, Jenny Lam,Sophie Levy, Jacob Salem

  2. Stoichiometry of Methane Steam Reformation CxHy + x H2O + heat →x CO + (x + y/2) H2 • Using natural gas/methane (CH4) for ease of explanation CH4 + H2O + heat → CO + 3 H2

  3. Adding a Reaction in Aspen

  4. Adding a Reaction in Aspen

  5. RYield • Only one input feed • Basis Yield = amount of component in the output / amount input • Ideal when lacking exact specifications about stoichiometry and kinetics • Specifications (need 2) • Need either: • Temperature / pressure • Temperature change • And one of: • Temperature • Pressure • Heat duty • Vapor fraction Source: http://www.just.edu.jo/~yahussain/files/Reactors.pdf

  6. RStoic • Uses similar streams as RYield • Ideal for known reaction stoichiometry • Kinetics may be unknown or unimportant • Specifications (need 2) • Need either: • Temperature • Pressure • And one of: • Temperature • Pressure • Duty • Vapor fraction Source: http://www.just.edu.jo/~yahussain/files/Reactors.pdf

  7. RStoic - Additional Optional Specifications Combustion Selectivity Heat of Reaction

  8. REquil • Ideal for: • Reactions with an equilibrium phase • Vapor and liquid product streams • Inputs • Material streams • Reaction • Extent of reaction (optional) • Calculates equilibrium conditions based on thermodynamic data • Outputs • Vapor AND liquid product streams • Keq Source: http://www.just.edu.jo/~yahussain/files/Reactors.pdf ** No kinetics or stoichiometry needed, but does not do a rigorous analysis

  9. RGibbs • Subset of equilibrium reactors • Ideal for: • Equilibrium systems with a solid phase • Finding phase and/or chemical equilibrium • Inputs • Material streams • Reactions (If phases are constrained) • Predicts equilibrium conditions by minimizing the Gibbs Free Energy • Outputs • Product streams Source: http://www.just.edu.jo/~yahussain/files/Reactors.pdf ** No kinetics or stoichiometry needed, but does not do a rigorous analysis

  10. Reaction Kinetics Source: https://www.sciencedirect.com/science/article/pii/S0360319916333821

  11. RBatch and RCSTR • RBatch • Used to model batch or semi-batch reactor • 1, 2 or 3 phases • Continuous vapor vent, delayed or continuous feeds (optional) • RCSTR • Used to model continuous stirred tank reactor • Contents of reactor has the same properties as the outlet stream • 1, 2 or 3 phases

  12. RBatch - Specifications • Pressure specifications • Reactor operating specificationand associated parameters • Constant temperature • Temperature profile • Constant heat duty • Heat duty profile • Constant coolant temperature • Heat transfer user subroutine • Phases present in the reactor • No solid phases

  13. RBatch - Kinetics and Stop Criteria • Reaction kinetics • Stop criteria variables • Time elapsed • Mole or mass fraction of a component • Conversion of a component • Total moles or mass of material • Total volume, temperature, pressure,or vapor fraction in the reactor • Mole or mass flow rate in vent • System property (i.e viscosity)

  14. RBatch - Operation Times & Outputs • Specify operation times • Batch cycle times • Calculation times for profile results • Some outputs • Time which stop criteria satisfied • Heat load per cycle • Min and max reactor temperatures

  15. RCSTR - Specifications • 2 design variables • Pressure • Temperature or heat duty • Valid phases • Reactor specifications (phase dependent) • Reactor volume • Residence time • Phase volume, fractions, or residence time • Reaction kinetics • Some outputs • Heat duty • Phases • Residence time

  16. RPlug • Rigorous simulation of ideal plug flow reactor • 7 types of RPlug specifications • No input required • Adiabatic • Input required • Specified temperature • Constant thermal fluid temperature • Co-current thermal fluid • Counter-current thermal fluid • Specified thermal fluid temperature profile • Specified external heat flux profile

  17. RPlug - Specifications Specified temperature • Temperature input • Location in reactor (fraction of reactor length) Specified external heat flux profile • Location in reactor (fraction of reactor length) • Heat flux at location

  18. RPlug - Specifications • Overall heat transfer coefficient • Thermal fluid temperature • Location in reactor (fraction of reactor length) • Temperature atlocation Constant thermal fluid temperature Co-current thermal fluid Counter-current thermal fluid Specified thermal fluid temperature profile

  19. RPlug - Configuration • Required • Reactor length • Reactor diameter • Optional • Number of tubes • Varying diameter

  20. RPlug - Catalyst • Must indicate catalyst present • Three specifications • Catalyst loading • Particle density • Bed voidage

  21. Pros/Cons of Kinetics-Based Reactors Pros • More accurate representation of reactions • Allows reversible reactions to be properly represented Cons • Can only be used if kinetics are known • More intense calculations can slow down simulation • RBatch and RPlug can only have one feed

  22. Conclusions • Reactor requirements differ based on their inputs • Number of Feeds • Stoichiometry • Kinetics • Various reactor and feed properties • Rigorous models stay true to real-life standards • Other models still valid for estimation • Select the appropriate reactor based on information you have • Type of reaction • Kinetics, Stoichiometry, etc.

  23. Sources Aspen Plus https://web.ist.utl.pt/ist11038/acad/Aspen/AspUserGuide10.pdf http://www.just.edu.jo/~yahussain/files/Reactors.pdf http://www.chemengr.ucsb.edu/~ceweb/courses/che184b/aspenplus/PolymersPlusUserGuideVolume2.pdf https://dechema-dfi.de/kwi_media/Downloads/tc/Vorlesungen/Erlangen/slides_4.pdf

  24. Thank you for listening! Questions?

More Related