1 / 4

LED Source Tests

LED Source Tests. RSL August 2012. LLS Cool White – see the last page of:. http://www.oceanoptics.com/technical/LLSLightSource.pdf. 600 um core fiber, goes to small integrating sphere; plan is to swap at source. t. Blu Loop. http://www.oceanoptics.com/Products/bluloop.asp.

chakra
Télécharger la présentation

LED Source Tests

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LED Source Tests RSL August 2012

  2. LLS Cool White – see the last page of: http://www.oceanoptics.com/technical/LLSLightSource.pdf 600 um core fiber, goes to small integrating sphere; plan is to swap at source t Blu Loop http://www.oceanoptics.com/Products/bluloop.asp

  3. fiber going to source(s); P/N QP-600-2-SR SR-3500 input optical fiber integrating sphere; M/N FOIS-1 zoomed sphere/SR-3500 fiber end (it is inside the sphere) SEI M/N SR-3500 spectroradiometer

  4. test plan • Warm up: take a dark, turn on source, take one lite (an average of 10 scans) every 5 min for 3 – 4 hours • Repeatability: repeat with the other LED source by changing the 600 um patch fiber at the source end (also covers warm-up) • Do this for a couple of days (tests repeatability of source level and effect of decoupling and recoupling the SMA connector at the source/fiber junction) • Turn on both sources, leave them on several days, swap fiber back and forth, acquiring data every 2 h or so • Move SEI bare fiber to NPR to get a calibration • If time and data look good, move sources to temperature/humidity chamber and measure levels

More Related