1. Chapter 3. Reliability: As my grand pappy, Old Reliable, used to say . . . Who is this famous bloodhound? What was he noted for saying?

2. What CU?

3. Reliability Topics: • The Basic Notion of Reliability • Factors Affecting Reliability • Methods of Determining Reliability • Methods Used by Professional Test Makers • Method Suggested for Your Own Tests • Standard Error of Measurement • Confidence Bands

4. Basic Notions of Reliability Reliability refers to the reliability of a test score or set of test scores, not the reliability of the test. Reliability questions ask: “Are the scores consistent?” “Are they stable?” Reliability is a matter of degree; it is NOT all-or-none. Reliability is not the same as validity – validity asks “Does a test measure what is suppose to?” (reliability is necessary for, but not a sufficient condition for, validity) . Reliability deals with unsystematic error in assessment. Systematic error (examples, “I test well because I am ‘test-wise’” or “I do not test well because English is not my first language”) will not be uncovered through tests of reliability

5. Factors Affecting Reliability:Sources of Unreliability Test Scoring – difference between two scorers judgments one scorer over time (fatigue) and/or halo effect Test Content – the sample of test items is too small the sample of test items is not evenly selected across material Test Administration – noise, time limits not consistent, physical conditions Personal Conditions – temporary ups and downs (chronic test anxiety would be a systematic error and thus undetectable through measures of reliability) Note: None of these factors automatically result in unreliability, but as we build our assessments, we hope to reduce the impact of these factors. The extent to which these factors may be affecting test scores is an empirical question and we can and will address this as we continue.

6. A Bit of Theory (True/Observed) • The “perfect test” would be unaffected by the sources of unreliability and on this perfect test each examinee should get his or her true score. Unfortunately, we know the observed score we get was likely affected by one or more of the sources of unreliability. • So, our observed score is likely too high or to low. The difference between the observed score and the true score we call the error score; and this score can be positive or negative. • We can express this mathematically as: • True Score = Obtained Score +/- Error • T = O +/- E (or, looking at it another way, O = T +/- E) • Theory Time: If we could re-administer a test to one person an infinite number of times, what would expect the distribution of their scores to look like? Answer: The Bell Shaped Curve. We will return to this concept when we discuss the standard error of measurement.

7. Determining Reliability by Usingthe Concept of Correlation • I can use my understanding of correlation (how two things are related) to come up with a mathematical calculation that will suggest the strength (or lack of strength) regarding one or more of the sources of unreliability that I have identified. • I will be calculating what will be called the reliability coefficient (since it is a correlation coefficient measuring a type of reliability). This value will range -1 to +1. • For example, let’s consider rater reliability. That is, do different scorers rate equally; or, another concern, does one scorer rate differently over time. We express that as either • Inter-rater : reliability among raters (international – many nations) • Intra-rater : same rater (intramural sports – within 1 school) • Note: the hyphen after inter- and intra- may not be used by some authors • Compute using Spearman Rank Correlation

8. Some History . . . Karl Pearson (1857-1936) • Pearson was a Galton protégé and was appointed the first Galton Professor or Eugenics (1911) at University College of London . • Introduced a new science:  "Biometrics" which integrated statistics with evolutionary theory. • Advocated social imperialism — "superior" races and countries should produce more offspring than those considered to be less developed. • In the United States, Indiana was the first to pass a pioneering statute (1907) allowing state officials to sterilize those deemed unfit to breed. California enacted an even stricter eugenics law.  California made it legal for state officials to asexualize those considered feeble-minded, prisoners exhibiting sexual or moral perversions, and anyone with more than three criminal convictions. 

9. More Reliability Approaches to Consider • Test-retest – (impractical for you; important in standardized tests) • Alternate Forms (again, impractical for you but important in standardized tests) • Internal Consistency (not appropriate for speeded tests) • Kuder-Richardson (really a series of formulas based on dichotomously scored items) • Coefficient alpha - Cronbach’s (most widely used as can be used with continuous item types) • Split-half; odd-even – w/Spearman-Brown correction to apply to full test (easiest for you to do and understand)

10. Reliability of Your Classroom Tests • I would recommend doing Split-Half Reliability. • Step 1 – Split your test into two parts (odd – even). • Step 2 – Use “Pearson Product Moment Correlation - Ungrouped Data” to determine “rxy” (rxy represents the correlation between the two halves of the scale). By doing the split-half we reduce the number of items which we know will automatically reduce the reliability, SO • Step 3 – To estimate reliability of whole test then use the Spearman Brown “correction” formula rsb = 2rxy /(1+rxy) where rsb is the split-half reliability coefficient

11. As a Teacher, What Do I Need to Know Most About Reliability • For tests I create myself: • Increasing number of items increases reliability. • Moderate difficulty level increases reliability. • Having items measuring similar content increases reliability. • For standardized tests I use: • Look for each test’s published reliability data. • Use the published reliability coefficient to determine the Standard Error of Measurement (abbreviated SEM) found in the data • See the following illustration

12. Standard Error of Measurement • The SEM is the standard deviation of a hypothetically infinite number of obtained scores around a person’s true score.

13. SEM and Confidence Bands • The SEM is a standard deviation of a distribution assumed to be normal . • So computing the SEM can help me better interpret scores • Formula: SEM = SD  1 - r • I can take the computed SEM and build a Confidence Band around my score. • Confidence Band • 68% Confidence Band +/- 1 SEM • 95% Confidence +/- 1.96 SEM • 99% Confidence +/- 2.58 SEM • I can also do percentiles (a bit harder). • Many professional test makers give me this information

14. Final Thoughts & Advice • Use multiple sources of information. • Find and Use a published test’s SEM to help interpretation. • Standard Error of Measurement is distinct from: • Standard error of mean (samples/populations) • Standard error of estimate (prediction) • Reliability for Criterion-referenced Items may use techniques already covered but sometimes require special treatment. • Worry about scorer reliability when score depends on judgment.

15. More Final Words . . . • Reliability for Sub Scores is problematic since small clusters are usually quite unreliable. • For important decisions, get reliability >.90. • Be wary of short tests. To increase reliability, increase number of items, exercises, or observations. • Occasionally check reliability of your classroom tests. • Be able to distinguish between reliability and validity.

16. Terms/Concepts to Review andStudy on Your Own (1) • alternate form reliability • coefficient alpha (Cronbach’s) • confidence band • error score • internal consistency • inter-rater reliability • intra-rater reliability • observed score

17. Terms/Concepts to Review andStudy on Your Own (2) • odd-even reliability • reliability coefficient • Spearman-Brown correction • split-half reliability • standard error of measurement • test-retest reliability coefficient • true score