Smoke Detector Testing - Adelaide Test and Tagging

1. Test requirements for smoke detectors vary by country but fall broadly into two categories: Functional (or Operational) Testing Functional checking is accomplished by introducing a smoke, or simulated smoke, stimulus from the protected area through the vents of a detector to the sensor (s). It is required by all national standards around the world and testing by electronic means that do not involve this test is not sufficient to comply. Calibration (or Sensitivity) Testing Sensitivity testing confirms whether the detector’s performance is within the acceptable parameters. Although some countries’ codes accept field sensitivity tests of smoke detectors by electronic means it can only be properly done by introducing a quantified source of smoke or surrogate smoke to the detector from the protected atmosphere. Smoke detectors can reduce house fire deaths by up to 60% that’s why it is important to ensure your home’s smoke alarms are tested. At Adelaide test and tagging we conduct professional smoke simulation testing of your domestic smoke detectors.

2. Minimizing the risk of an electrical hazard in the workplace with Test and Tagging services. Visit our website today to know about prices and cost involved. Feel free to reach us at 1300 311 445 to get a free quote. Adelaide test and tagging is an electrical and fire safety testing and tagging company With professional, fully qualified technicians and customer satisfaction being our top focus, we are happy to answer any questions and provide you with the right advice for your company’s requirements. Website :- https://adelaidetestandtagging.com.au/ Contact Us Adelaide Test and Tagging 18 Attrill ave. Hilton South Adelaide, South 5033 Australia 1300 311 445