1 / 14

Production Intent DME Fuel System Design

Production Intent DME Fuel System Design. Design Approach. Designed for CNC Manufacture-Avoids Capital Investment 35% Fewer Parts-Low Cost, Improved Reliability Higher Pressure Capability (400 Bar +) Poppet Solenoid, Low Leakage 75 HP/Cylinder Capability. Design Features-Pump.

chuong
Télécharger la présentation

Production Intent DME Fuel System Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Production Intent DME Fuel System Design

  2. Design Approach • Designed for CNC Manufacture-Avoids Capital Investment • 35% Fewer Parts-Low Cost, Improved Reliability • Higher Pressure Capability (400 Bar +) • Poppet Solenoid, Low Leakage • 75 HP/Cylinder Capability

  3. Design Features-Pump • 5-Cyl. Pump (vs 7) • Ø10.5 Plungers (vs Ø12.5) • 5 cc/rev (vs 11.7cc/rev) • Bolt-on Cam w/Cermet Insert • Machined Housings-No Castings • 8-Bolt Pattern-No Special Seals Needed

  4. Pump Assembly LOADING…

  5. Pump Assembly Procedure

  6. Common Rail Features • Vacuum Brazed Tube & Block • No Secondary Operations (Grinding or Straightening)-Proven Process • Integral Poppet Solenoid (Zero Leak) • No Solenoid O-Rings • Screw-In Fittings for Tubes

  7. Common Rail Assembly LOADING…

  8. Fuel Injector Features • Ø17mm Primary Diameter • Ø25mm Maximum Diameter • Axi-symmetric Design • No Leak-Vent Needed • Simple to Manufacture • Low Cost

  9. Injector Assembly LOADING…

  10. Control Module • Similar to Previous Design • Housing Modified for Bolt-On Bracket • New Rail Pressure Valve (Lower Cost) • Electronic Backpressure Valve Will Be Replaced w/Passive Valve • New, Low Cost Internal Filter

  11. Pressure Control Module Ass’y. LOADING…

  12. Prototype & Low Volume Production (2000 Units/Year) • AFT Can Produce Housings, Shafts, Cylinders, Semi Finished Plungers, Guide Plates, Injectors, Covers & Modules • Have Ordered State of Art CNC Equipment-Delivery in 6 Weeks • Outsource Finished Plungers, Slippers, Nozzle Valves, Solenoid Valves • Assembly & Test Can Be Done In-House

  13. CNC DemonstrationHAAS SL-20 W/Live Tools Ordered

  14. Prototype Cost & Lead Times • Prototype Cost & Lead Times Reduced by 50% • Changes Can Be Made Rapidly • Assembly Simplified-Field Serviceable • Easily Adaptable to Many Engines • Production Planned 2009

More Related