1 / 8

CPU PROGRAMMING

CPU PROGRAMMING. PURPOSE. To learn how to upgrade software of CPU. SOFTWARE UPGRADE. Turn OFF the system . 2) In PC, Copy the file wbcpx.exe and the CPU Master software file z_ xxx . kbf in to the same directory for example>ds200prg) .

cole
Télécharger la présentation

CPU PROGRAMMING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CPU PROGRAMMING

  2. PURPOSE To learn how to upgrade software of CPU.

  3. SOFTWARE UPGRADE • Turn OFF the system. 2) In PC, Copy the file wbcpx.exe and the CPU Master software file z_xxx.kbf into thesame directory for example>ds200prg) . Note: The file used for programming CPU200S is wbcp54.exe and the software file is named as z_xxx.bin. 3)Make sure that the jumper J201 on the CPU-module (the small card on top) is at position WR(write). ● J201 is at WR position as default. 4) Connect the CPU200 card to the CPUKON card by the flat cable, just as usual.

  4. 5)Type the following command in MSDOS prompt : C:\ds200prg>wbcpx z_adz.kbf com1: f v ( f=fast, v=verify ) (For DS200S/DS200M: wbcpv54 z_adz.bin com1: f v) 6) After the program prompts you (when you see “OK to reboot” on MSDOS window), turn ON the system. 7)Now, system is ready with the new CPU software.

  5. The initial command Power on time

  6. Software Upgrade Through IDEA • Newly, CPU master software is being upgraded by IDEA Program. • NOTE: You need to copy the CPU master software into the same directory where IDEA program operates .

  7. Software Upload - IDEA

  8. THANK YOU VERY MUCH... int.support@karel.com.tr

More Related