Transfer Switch Power Cord – Explore Certain Relevant Facts

1. Transfer Switch Power Cord – Explore Certain Relevant Facts When it comes to transfer switches, these are said to be necessary for any emergency or standby power systems. It is able to transfer a load to generator and also tells the generator when it actually starts and also when to turn off. In case of power outage, the transfer switches tend to command the complete backup generator to begin. When generator is fully ready to offer power the transfer switch power cord will disconnect the connection to your utility and also your main power source will be your generator. When power comes back, your switch then gears will tell the generator to turn off completely and then will connect you back to the main source. It is also important to isolate your generator from some distribution system for preventing the service wiring from an accidental energization and also the generator from overloaded. The switch gear is generally installed on permanent basis near about the circuit breaker panel. After this, you can then set it to allow power to those of some necessary circuits or also to all circuits to power your whole house. You can then also set to give priority some optional circuits or also load shedding like cooling and also heating equipment. 2122 E Birchwood Ave. Suite A Cudahy, WI 53110 1-414-323-3240 Toll Free: 1-877-267-3711 customerservice@cordtec.com http://www.cordtec.com/