1 / 8

Practise questions

Practise questions. Answers later. Qs. 1 on VI.

crete
Télécharger la présentation

Practise questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Practise questions Answers later

  2. Qs. 1 on VI The coefficient of dynamic viscosity values for a high grade oil and a low grade oil at 40 oC are 15 cp and 60 cp respectively. It is required to determine the viscosity index (VI) of an oil having a viscosity value of 25 cp (centipoise) at 40 oC. The test and reference oils have the same viscosity values at 100 oC. Determine the VI of the test oil using the Dean Davis method. Step 1. Check whether the viscosity of the test oil at 40 oC (U) is in between those of the high grade oil (H) and low grade oil (L) or not. We see that L = 60 cp, H = 15 cp, and U = 25 cp, H < U < L Therefore we can use the formula,

  3. Upper surface is stationary h Oil wedge Bottom surface moves with velocity U x Practise qs. 2 on tilting pad brg. The following figure shows a bearing undergoing hydrodynamic lubrication. Reynold’s equation in 1 dimension gives the pressure (p) drop in the x-direction as Find the pressure drop in the x direction when the height of separation “h” is 0.5 mm. Calculate the flow rate in the x direction given its formula per unit width as Given: U = 20 cm/s, coefficient of dynamic viscosity h = 40 cp. The distance of separation at maximum pressure ho is 0.4 mm. There is negligible flow in other directions.

  4. Width of bearing B = 50 mm • L/B = 1 • Sliding velocity = 5 m/s • Min. film thickness = 0.02 mm • Viscosity = 0.02 Pa.s • Attitude K = 2.0 Find load, friction and coefficient of friction

  5. Prob. Temperature rise in tilting pad brg. -What is the temperature rise in the oil for the previous problem. Density of the oil = 880 kg/m3, specific heat capacity = 1900 J/kg.K Mechanical equivalent of heat = 1 J heat per 1 joule of friction energy since we are using SI units throughout

  6. Journal dia. = 100 mm • L/D = 1 • Radial clearance = 0.025 mm • Journal speed = 3000 rpm • Eccentricity ratio = 0.6 • Viscosity = 0.02 Pa.s Find attitude angle, load, friction and coefficient of friction for Sommerfeld’s half condition and narrow brg. theory

  7. Sommerfelds half condition Narrow brg.

  8. Prob. Viscosity and friction for tilting pad brg. A tilting pad slider bearing has the following operation parameters • Angle of inclination = 0.4o • Leading edge height = 0.75 mm • Trailing edge ht. = 0.25 mm • Load to be carried = 6000 N • Sliding speed = 2.5 m/s • Bearing length L = 8 cm • Bearing width B = 7.5 cm Calculate the viscosity of the oil required to operate under these conditions and friction at the two surfaces =

More Related