1 / 35

T. Worch, S. Lê , P. Punter & J. Pagès (thierry@qistatistics.co.uk)

From the formulation to the optimization of skin creams: A case study based on the Ideal Profile Method. T. Worch, S. Lê , P. Punter & J. Pagès (thierry@qistatistics.co.uk). Introduction. Crunchy, sweet, a lil ’ hint of salt…. Hmmm! Delicious!. Aww ! No!! Too sour….

cutler
Télécharger la présentation

T. Worch, S. Lê , P. Punter & J. Pagès (thierry@qistatistics.co.uk)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. From the formulation to the optimization of skin creams:A case study based on the Ideal Profile Method T. Worch, S. Lê, P. Punter & J. Pagès (thierry@qistatistics.co.uk)

  2. Introduction Crunchy, sweet, a lil’ hint of salt… Hmmm! Delicious! Aww! No!! Too sour… In the literature, many studies have shown that consumers are somewhat accurate when rating products. Still, when consumers are used, another question could be asked… Hedonic task JAR task Sensory task Slide 2

  3. The essence of the IPM What is your ideal? Slide 3

  4. Principle of the IPM [1] Consumers rate products on: • both their perceived and ideal intensities for a list of attributes • alternatively • using the same scale • overall liking (and specific liking). It is a mix of: • quantitative descriptive analysis (such as QDA®) but • performed by consumers • JAR scaling but • perceived and ideal intensities are rated explicitly Slide 4

  5. IPM in practice Slide 5

  6. IPM Data H E D O Sensory Profile A Attributes A Attributes Ideal Profile P Products P Products P Products P denotes the number of products A denotes the number of attributes Slide 6

  7. Questions: What is ideal data? What can we expect from it?

  8. Definition of ideal “A conception of something in its absolute perfection.” “One that is regarded as a standard or model of perfection or excellence.” “An ultimate object of endeavor; a goal.” “Considered the best of its kind.” “Completely or highly satisfactory.” Source: Oxford dictionary Slide 8

  9. Sensorydefinition of ideal Proposition: “It is a product with particular sensory characteristics which would maximize liking” SENSORY ASPECT HEDONIC ASPECT Slide 9

  10. Expectedideal Slide 10

  11. Question: How confident can I be about ideal data?

  12. Consistency [2] Sensory consistency: The ideal data provided by a consumer is consistent if the sensory profile associated to this ideal has similar sensory characteristics as the most appreciated product. E.g.: Consumers who said they have a higher appreciation for the products perceived as sweeter should also rate their ideals as rather sweet. Statistical procedure: Ensure that the ideal is making the link between sensory and hedonic. Slide 12

  13. Consistency [3] Hedonic consistency: The ideal data provided by the consumers should correspond to products which would be more appreciated than the products tested. The ideal product of a consumer should hence be associated to a liking score (liking potential) which should be larger than the liking scores given to the products tested. Statistical procedure: Define a model which explains liking based on the sensory and apply this model to the ideal product. Slide 13

  14. Questions: Why acquiring such data? What is the practical purpose of it?

  15. Tool for optimisation [4] Optimisation: The Ideal product should be used to improve the products. The guidance provided should take into consideration whether attributes are drivers of liking or not, as well as the deviation between perceived and ideal intensities. Statistical procedure: Consider both the deviation from ideal for each attribute and the weight of each attribute on liking. Slide 15

  16. Questions: Is there one ideal for all? Would the optimisation be the same for every consumer/product?

  17. Homogeneous group…of consumers Clustering: Like for any optimisation procedure, one needs to make sure that homogeneous segments of consumers are defined (in terms of liking). Otherwise, the optimisation procedure might be based on inappropriate product that nobody would like. Statistical procedure: Any classical/usual clustering technique can be used. Slide 17

  18. Homogeneous group…of products [5] Single vs. Multiple ideals: During the test according to the IPM, consumers were asked to describe their ideals based on each product tested. For homogeneous product categories, the consumers should associate the set of products to one unique ideal. If different sub-categories exist, multiple ideals are found. Statistical procedure: Use the variability between products of the ideal ratings to determine whether a systematic shift is observed across consumers. Slide 18

  19. Defining the reference [6] Ideal of Reference: Define the sensory profile of the ideal product used as reference. Two points of view can be adopted: either we try to slightly satisfy the majority of consumers (means), or we try to fully satisfy a lower proportion of consumers (IdMap). Statistical procedure: IdMap: Project on the sensory product space the ideal area of each consumer and define the area that is shared by the majority of consumers. The sensory profile of the ideal product of this area defines the product of reference. Slide 19

  20. The Ideal Profile Analysis [7] Finally, the procedure to analyse ideal data (called Ideal Profile Analysis) is done in four steps: Slide 20

  21. Example: The Skin Creams study

  22. Skin Creams The products: 18 skin creams were formulated 8 out of the 18 skin creams were selected (Napping®) The consumers: 72 women from Agrocampus-Ouest (Rennes) The questions: 13 sensory attributes 3 specific liking questions + overall liking Slide 22

  23. Product Space EASY TO APPLY ON THE SKIN PERCEPTION OF FAT Slide 23

  24. Ideal Profile Analysis • Consistency The ideal from consumers are consistent both from a sensory and hedonic point of view. • Segmentation The consumers were in strong agreement in terms of liking: no segmentation is observed. Slide 24

  25. Single vs. Multiple Ideal Slide 25

  26. Ideal Mapping Slide 26

  27. Ideal of Reference Slide 27

  28. Formulation of new products Formulation of new products: From the 18 original products, 2 have the characteristics of the ideal (products 2 and 9). Second test: Use of 6 of the 8 previous products + 2 new products 65/72 previous consumers Same methodology of the IPM Slide 28

  29. New Product Space EASY TO APPLY ON THE SKIN PERCEPTION OF FAT Slide 29

  30. So, improvements?? Slide 30

  31. So, improvements?? Slide 31

  32. Summary Presentation of the IPM: • Sensory methodology; • Concepts around the particular data; • Statistical methodology around these concepts; Presentation of a step by step methodology to analyse the data, from the data acquisition to the optimization (passing through quality check and important processing step). Slide 32

  33. Conclusion IPM appears to be a good methodology for product optimisation and product development. Why using IPM/IPA over other methodologies? • all information provided directly from the same consumers; • the data collected is rich; • the quality of the data can be verified; • check for multiple ideals; • extrapolation outside the product space. Slide 33

  34. References [1] Worch, Lê, Punter & Pagès (2013). Ideal Profile Method (IPM): the ins and outs, FQP, 28. [2] Worch, Lê, Punter & Pagès (2012). Assessment of the consistency of ideal profiles according to non-ideal data for IPM, FQP, 24. [3] Worch, Lê, Punter & Pagès (2012). Extension of the consistency of the data obtained with the Ideal Profile Method: Would the ideal products be more liked than the tested products? FQP, 26. [4] Worch, Dooley, Meullenet & Punter (2010). Comparison of PLS dummy variables and Fishbone method to determine optimal product characteristics from ideal profiles, FQP, 21. [5] Worch & Ennis (2013). Investigating the single ideal assumption using Ideal Profile Method, FQP, 29. [6] Worch, Lê, Punter & Pagès (2012). Construction of an Ideal Map (IdMap) based on the ideal profiles obtained directly from consumers, FQP, 26. [7] Worch, Crine, Gruel & Lê (2013). Analysis and validation of the Ideal Profile Method: Application to a skin cream study, FQP, in press. Slide 34

  35. Thank YOU!! JérômePagès Pieter Punter SébastienLê This presentation is available for download @ www.qistatistics.co.uk

More Related