1 / 16

Agilent HFSS

Agilent HFSS. Quickstart Tutorial Matthew J. Inman Thursday September 20, 2001. Available On-line at: http://www.ee.olemiss.edu/computers/help.asp. Starting New Project. Start HFSS. Open Project Manager. New. Project Parameters. Project Preferences. Materials->Assignment.

dalia
Télécharger la présentation

Agilent HFSS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Agilent HFSS Quickstart Tutorial Matthew J. Inman Thursday September 20, 2001 Available On-line at: http://www.ee.olemiss.edu/computers/help.asp

  2. Starting New Project Start HFSS Open Project Manager New

  3. Project Parameters Project Preferences Materials->Assignment 1. Type Material Name 2. Choose Material Type 3. Press New Material 4. Enter Material Parameters Units Size of Workspace

  4. Drawing 1. To Draw select Model->Draw 2. Objects can either be drawn by clicking on the workspace and dragging or by coordinate entry. 3. Coordinate entry uses local coordinate system (U,V,[Height]) defined by the plane you are working in. To change working plane choose Define->Plane Set

  5. Drawing 3D Box Choose 3D Objects->Box 1. Type in Origin point (0,0,0) 2. Type in Ending point (10,10) {Height is not accepted} 3. Choose object name, Material type, and make any changes to box position and dimensions (3) (1) (2)

  6. Completed Box

  7. Drawing 2D Rectangle Choose 2D Objects->Rectangle *Note All 2D drawing will occur in the current plane 1. Type in Origin point (0,0) 2. Type in Ending point (10,10) 3. Choose object name, Material type, and make any changes to box position and dimensions (3) (1) (2)

  8. 2D Rectangle (Cont) Choose 2D Objects->Rectangle 1. Type in Origin point (4,0) 2. Type in Ending point (6,10) 3. Choose object name, Material type, and make any changes to box position and dimensions (Including the Z coordinate) (3) (1) (2)

  9. 2D Completion Ground Plane Top Metal Line 3D Dielectric Box

  10. Boundary Box Choose 3D Objects->Box 1. Type in Origin point (-5,-5,-5) 2. Type in Ending point (20,20) {Height is not accepted} 3. Choose object name, Material type, and make any changes to box position and dimensions (3) (1) (2)

  11. Completed Geometry Click on File->Return to Main to get out of drawing mode

  12. Setting Up Boundaries Click on Boundaries->Add/Modify Select Radiation and click on Add Choose Boundary Selection Method

  13. Adding Voltage Sources Click on Boundaries->Voltage Sources Click on Enter Number of Sources and choose Click on Source number Choose Line Color Enter Coordinates Click Apply Twice to set

  14. Simulation Setup Set Frequencies to simulate and click Run Now

  15. Running Simulation

  16. Post Processing Click on Post->Start Post Processor

More Related