1 / 43

S4 C1

S4 C1. REVIEW. Review Topics. Switching, VLANs, LAN Design, Routing Protocols (especially IGRP), ACLs, and IPX Why use LAN switching and VLANs Must gather and assess user requirements Select best routing protocol

dana
Télécharger la présentation

S4 C1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. S4 C1 REVIEW

  2. Review Topics • Switching, VLANs, LAN Design, Routing Protocols (especially IGRP), ACLs, and IPX • Why use LAN switching and VLANs • Must gather and assess user requirements • Select best routing protocol • Device a method to control data packet flow based on access control lists (ACLs) • Design for multiple protocols – IPX and IP

  3. Network Demands • Increase in large graphic files, images, and full-motion video – place strain on 10 Mbps • Network utilization sharing large files, accessing database servers, etc. results in network congestion which is evidenced by slower response times, longer file transfers, and decreased productivity • SOLUTION – MORE BANDWIDTH

  4. Why Segmentation? • Decrease network congestion • Data passed between segments is transmitted on backbone which is its own collision domain

  5. LAN Switch Segmentation • Switch eliminates impact of collisions through microsegmentation • Switch results in low latency and high frame-forwarding rate • LAN segmentation works with 802.3 (CSMA/CD) compliant interfaces and cabling

  6. How a LAN Switch Operates • Enables dedicated access, eliminates collisions, increases capacity, and supports multiple conversations • Acts as multiport bridge creating smaller collisions domains; transparent to upper layers and uses layer 2 MAC address • Forwards frames based on forwarding table and MAC addresses

  7. How the LAN Switch Learns Addresses • Examines source address of frames coming in to switch • Sends frame out all ports expect the port the frame entered when the address is broadcast, multicast, or unknown • Forwards frame when the destination is on a different segment (interface) • Filters when the destination is on the same interface

  8. Symmetric/Asymmetric • Symmetric • Provides switching between like bandwidths • Multiple simultaneous conversations increase network throughput • Asymmetric • Provides switching between unlike bandwidths • Requires the switch to use memory buffering

  9. Switching Types • Cut Through • Lowest latency; only reads 6 bytes • No error checking – sends as soon as outgoing interface is determined • Fragment Free • Low latency • Checks for collisions (filters most errors) – reads 64 bytes • Store and Forward • Highest latency • All errors filtered • Does CRC before looking up destination tables and forwarding the frame

  10. VLANS • Group of ports or users in same broadcast domain • Based on port ID, MAC address, protocol, or application • Created with switches and network management software • Frame tagged with VLAN ID

  11. LVAN & Broadcast Transmission • Logical network independent of members’ physical locations • Administratively defined broadcast domain • Users reassigned to different VLAN using software • Broadcast Transmission • Single data packet sent into network and copies and set to every network node

  12. Frame Filtering • A filtering table is developed for each switch • Switches share address table information • Table entries are compared to frames • Switch takes appropriate action

  13. Frame Tagging • Developed for multi-VLAN interswitched communication • Places unique identifier in header of each frame as it travels across vertical cabling • Identifier removed before frame exits switch on non-backbone links • Layer 2 Protocol • Requires little processing and administrative overhead

  14. VLAN Broadcast Demands • VLANS and routers restrict broadcasts to domain of origin • Adjacent ports do not receive broadcast traffic generated from other VLANs • Control the size of broadcast domain by limiting the size of the VLAN

  15. Port-Centric VLANS • All nodes attached to the same router port must be in the same broadcast domain • Users are assigned by port • VLANs are easily administered • Security between VLANs is maximized • Packets do not "leak" into other domains • VLANs and VLAN membership are easily controlled across network

  16. Static VLANs • Statically assigned ports (port-centric is one type of static VLAN) • Secure – only ports identified with VLAN receive broadcast • Easy to configure and monitor • Easy to reassign port to another VLAN

  17. Dynamic VLANs • Assigned using centralized VLAN management application • Based on MAC address, logical address, or protocol type • Less administration in wiring closet • Notification when unrecognized user is added to network • More administration required up front to set up database within VLAN management software and to maintain accurate database of users

  18. LAN Design Goals • Functionality • Scalability • Adaptability • Manageability

  19. Design Methodology • Know Client – Determine Client goals • Analyze requirements • Develop LAN structure (physical and logical topology) • Set up addressing and routing

  20. Problems LAN Design Solves • Media contention • Excessive broadcasts • Need to transport new payloads • Need for more bandwidth • Overloaded backbone • Network layer addressing issues

  21. Topology Issues • Where are routers placed? • Where are switches placed? • What type of network media is used? • Do you use hubs, repeaters? • Design Goals • MDF (concentration point) with IDFs • LAN switching and microsegmentation

  22. Design Goals Continued • Create LAN segments that will filter flow of data packets • Isolate ARP broadcasts • Isolate collisions between segments • Filter Layer 4 services between segments • Router is the central point in the LAN for traffic destined for the WAN port.

  23. More Design Goals • Within the MDF and IDFs, the Layer 2 LAN switches must have high speed (100Mbps) ports allocated for servers.

  24. Routing Metrics • A number used to represent distance and costs • Bandwidth, delay, load reliability, hops, ticks, Costs • Information used to select best path for routing

  25. Routing Protocols • Distance vector – adds metrics • Link State (SPF) re-creates the exact topology of entire internetwork • Balanced hybrid – combines aspects of link-state and distance vector

  26. Distance VectorBellman-Ford • Pass periodic copies of routing table from router to router • Routers do not know exact topology of network

  27. Exterior / Interior Routing Protocols • Exterior – communicate between autonomous systems • BGP and EGP • Interior – communicate within autonomous system • IGRP, EIGRP, OSPF, RIP

  28. IGRP • Cisco Proprietary • Uses bandwidth, delay, load, reliability, and MTU (Maximum transmission Unit) • Versatile, complex topologies, flexible for segments with different bandwidths, scalable • Router igrp autonomous-system • Network network-number

  29. Access Lists • Standard • Simpler address specifications • Generally permits or denies entire protocol suite • Extended • More complex address specifications • Generally permits or denies specific protocols • Permits or denies with more granularity M

  30. How Access Lists Work • For logical completeness, an access list must have conditions that test true for all packets using the access list. A final implied statement covers all packets for which conditions did not test true. This final test condition matches all other packets. It results in a deny. Instead of proceeding in or out an interface, all these remaining packets are dropped.

  31. Access List Numbers • IP standard 1-99 • IP Extended 100-199 * Named (Cisco IOS 11.2 and higher) • IPX standard 800-899 • IPX extended 900-999 • SAP Filters 1000-1099 • AppleTalk 600-699

  32. Access Lists Check For • Source IP address • Destination IP address • Specific protocols • Upper-level TCP or UDP port

  33. Wildcard Masks • 0 bit means check the corresponding bit value • 1 bit means do not check the corresponding bit value • ANY can replace 0.0.0.0 255.255.255.255 • 0.0.0.0 means any network • 255.255.255.255 means do not check any • Host ip address means check all bits

  34. Placing IP Access Lists • Place standard access lists close to destination • Place extended access lists close to the source

  35. Cisco/Novell Compatibility • Uses Access lists and filters for IPX, RIP, SAP, and NetBIOS • Scalable routing protocols, including Enhanced IGRP and NLSP • Configurable RIP and SAP updates and packet sizes • Server-less LAN support • Rich diagnostics, management, and troubleshooting features

  36. Novell • Network protocol stack supports all common media access protocols. Data link and physical layers accessed through ODI (Open Data Link Interface) • RIP routing information • SAP advertise network services • NCP provides client-to-server connections and applications • SPX connection oriented services

  37. Novell Addressing • 80 bits • 32 network • 48 host – MAC address • No subnets • No need for ARP

  38. Cisco Encapsulation • Ethernet • Ethernet_802.3 novell-ethernet • Ethernet_802.2 sap • Ethernet_II arpa • Ethernet_Snap snap • Token Ring • Token-ring sap • Token-ring_snap snap • FDDI FDDI_SNAP snap • FDDI=802.2 sap • FDDI_Raw novell-fddi

  39. Novell Routing • Uses ticks and top counts • Broadcasts every 60 seconds • Uses simple split horizon • Does not advertise routes that were learned from the same port • Load shares based on IPX maximum-paths

  40. SAPs • SAP packets advertise all NetWare services • Can add excessive broadcast traffic • Routers listen to SAPS and build tables for known services and broadcast table every 60 seconds • Router responds to queries by providing network address – client contacts device directly

  41. GNS • Broadcast from client needing a server • Server and router get SAP packet • Servers provide GNS response

  42. IPX Routing Configuration • Global • IPX Routing • Load Sharing • Interface Configuration • Network numbers • Encapsulation Type

  43. Show Commands and Troubleshooting • Show ipx interface • Show ipx route • Show ipx servers • Show ipx traffic • Debug ipx routing activity • Debug ipx sap

More Related