1 / 11

Timber Derivatives- Manufactured Boards

Timber Derivatives- Manufactured Boards. Product design. Manufactures boards.

dayton
Télécharger la présentation

Timber Derivatives- Manufactured Boards

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Timber Derivatives- Manufactured Boards Product design

  2. Manufactures boards Manufactured boards are now extensively used in industry and in the home. These relatively new materials are known as composites. Generally, these materials are manufactured using natural timber in thin sheets or particles, which are bonded with a resin, compressed and heated. These products are environmentally friendly because they are often produced from waste products such as sawdust, bark and off-cuts.

  3. Advantages & Disadvantages Advantages • cheap • stable (in warm, centrally-heated environments) • thin veneers of expensive timbers can be used as top, decorative layers • boards are available in large sheets (1220 x 2240 and 1550 x 1550) Disadvantages • edges require ‘facings’ • repair and maintenance can be difficult

  4. Common Manufactured Boards

  5. Common Manufactured Boards

  6. Plywood • Plywood is made from layers or plies of wood glued together. • The grain of each ply is laid at right angles to the next. • This makes the ply strong in both directions Plywood is ideal for lightweight box construction, cabinet backs and drawer bottoms

  7. Blockboard • These boards are made by sandwiching strips of softwood between two plies. • The outer faces of veneer have the grain running at right angles to the strips. Ideal for furniture and worktops

  8. Hardboard • Hardboard is made by mixing wood fibres together with water and resin glue and hot pressing into sheets. • Hardboard is not very strong and is usually supported on timber frames Ideal for low-cost furniture parts e.g. drawer bottoms

  9. MDF • MDF is manufactured in a similar way to hardboard but is compressed under greater pressure and is therefore much stronger. • MDF is cheap, strong and is easily shaped and finished. Ideal for all types of furniture making and interior joinery

  10. Chipboard • Chipboard is made by gluing chips of wood together under heat and pressure. • Standard sheet size is 1220mm x 2440mm. Common thickness is 18mm. Veneers and plastic laminate faced chipboard is widely used for worktops, shelves and furniture making

  11. Questions • Why are manufactured boards environmentally friendly? • State two advantages of man-made boards • State two disadvantages of man-made boards • Name four manufactured boards and their properties • State one usage for six different man-made boards

More Related