1 / 11

B-tagging Efficiency

B-tagging Efficiency. Monica Dunford April 24 th , 2007. Cuts and Jet Selection. Using WHbb and WHuu samples with 3mm Pixel and 5mm SCT FTKsim banks (incomplete training) For all samples, the following are applied -1.0 < Cot(  ) < 1.0 -0.3 < curvature(GeV -1 ) < 0.3

dchong
Télécharger la présentation

B-tagging Efficiency

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. B-tagging Efficiency Monica Dunford April 24th, 2007

  2. Cuts and Jet Selection • Using WHbb and WHuu samples with 3mm Pixel and 5mm SCT FTKsim banks (incomplete training) • For all samples, the following are applied • -1.0 < Cot() < 1.0 • -0.3 < curvature(GeV-1) < 0.3 • No cuts on truth track association • Associate FTK tracks jets using the Cone 0.4 algorithm • Require r = (2+2) < 0.4 • Jet Pt > 20 GeV and jet abs()< 1.0 • Require at least two or more tracks associated with each jet

  3. B-tagging Efficiency • Method 1: Two or more tracks above with d0 > X • Method 2: Two or more tracks above with d0/ > X • Method 3: d0/ Likelihood ratio Likelihood ratio: Acceptance Cut: L2 Trigger uses a 2D selection with d0 and z0

  4. Likelihood Ratio Distribution iPat FTK

  5. FTK B-tagging Efficiency • FTK B-tagging efficiency for three different methods • Not entirely sure why the d0/ method is worse than d0 method

  6. Compared to the L2 results A. Coccaro’s March T&P talk • Note the difference in ordinate scale 2D algorithm used Black - L2 Green - EF Red - offline

  7. Problems with L2 Output • Re-ran L2 algorithm on WH samples • Multiple problems • Bug in Athena, 2D algorithm results are not stored correctly to ntuples • z0 results look bizarre (see next slide) • EF algorithm results are bogus (see next, next slide)

  8. L2 z0 Likelihood Ratio Distr. • Not sure what this distribution should look like, but there is little discrimination power here

  9. EF d0 Algorithm Results • Clearly just something wrong here

  10. Comparing Efficiencies • FTK is on par with L2 d0 algorithm (but not entirely sure that L2 values results are correct)

  11. Summary and Next Steps • Calculate efficiency using • 2D (d0 and z0) methods • Offline Algorithm • Use L1 ROI instead of Cone 4 jets • Fix L2/EF Athena ntuple issues to obtain reasonable output

More Related