370 likes | 698 Vues
GAS LAWS. Pressure. Remember: Pressure = Force / area or mass x gravity / area Force = mass x gravity. Measuring Pressure. Devices used: Barometer-Invented by Torricelli Pressure Gauge Tire Gauge Sphygmomanometer. Units of Pressure.
E N D
Pressure Remember: • Pressure = Force / area or mass x gravity / area • Force = mass x gravity
Measuring Pressure Devices used: • Barometer-Invented by Torricelli • Pressure Gauge • Tire Gauge • Sphygmomanometer
Units of Pressure • Standard atmospheric pressure (1 atm) = 760 mm Hg or 760 torr (1 mm Hg = 1 torr) • In the United States we use inches in atmospheric pressure. • Pascal- used in science as a unit of pressure (Pa). • Kilopascals are used as well (KPa).
Practice • How many torrs are in 4.5 atm? • The barometer reads 1,760 torr, how many atm? • I have a reading of 3700 torr, convert to atm. • You have 3 atm, how many torr?
Boyle’s Law • Shows the relationship between Pressure and Volume • The Law assumes that the temperature does not change • Discovered by Robert Boyle
Boyle’s Law P1V1 = P2V2 • P1= Pressure 1 • V1= Volume 1 • P2= Pressure 2 • V2= Volume 2 • This formula works with any unit of Pressure (torr, Pa) • Any unit of volume works (mL, L). • Make sure you have the same units on both sides! If not, change one to match the other. • If one side has mL and the other has L, convert one to match the other.
Boyle’s Law • A gas measured a volume of 100 mL under pressure of 740 torr. What would be the volume under a pressure of 780 torr with constant temperature? Step 1: Figure out what you have. • P1 = 740 torr • V1= 100 mL • P2= 780 torr • V2= X
Boyle’s Law • Step 2: Plug the numbers into the formula P1V1 = P2V2 (740 torr)(100 mL) = (780 torr)(X) • Step 3: Solve for x 74000 = 780X X= 94.87 mL
Boyle’s Law • So the new volume in this case is 94.87 mL • Since we increased the pressure, the volume is decreased. • The formula is a proportion. If something increases, something else will decrease!
P1V1 = P2V2 Practice • A sample of gas is confined to a 100 mL flask under pressure of 740 torr. If the same gas were transferred to a 50 mL flask, what’s the new pressure? P2 = P1V1/V2 P1 = V1 = P2 = V2 = 740 torr 100 ml X 50 ml P2 = (740)(100)/50 P2 = 74000/50 P2 = 1480 torr
P1V1 = P2V2 Practice 2. You are given a gas that you measure under a pressure of 720 Pa. When the pressure is changed to 760 Pa, the volume became 580 mL. What is the first volume? V1 = P2V2/P1 P1 = V1 = P2 = V2 = 720 Pa X 760 Pa 580 ml V1 = (760)(580)/720 V1 = 440800/720 V1 = 612.2 ml
P1V1 = P2V2 Practice • A pressure on 134 mL of air is changed to 1200 torr at a constant temperature, if the new volume is 45 mL what is the original pressure? P1 = P2V2/V1 P1 = V1 = P2 = V2 = X 134 ml 1200 torr 45 ml P1 = (1200)(45)/134 P1 = 54000/134 P1 = 402.9 torr
P1V1 = P2V2 Practice 4. An amount of Oxygen occupies 2 L when under pressure of 680 torr. If the volume is increased to 3 L what is the new pressure? P2 = P1V1/V2 P1 = V1 = P2 = V2 = 680 torr 2 L X 3L P2 = (740)(100)/50 P2 = 74000/50 P2 = 1480 torr
Reminders • Check your units • Temperature must remain constant in Boyle’s Law. • P= Pressure (torr, Pa, KPa). • V= Volume (mL, L). “If you don’t exhale on your way up Cookie, your lungs will explode! Robert De Niro as Chief Saturday
Charles Law • Shows a relationship between Volume and Temperature. One thing increase, so does the other. Both behave the same way. • Pressure remains constant. • V= Volume • T= Temperature
Few things first… • ALL TEMPERATURES MUST BE CONVERTED TO KELVIN! • The Law only works with Kelvin • If you have Celsius, make sure you convert it to Kelvin. • Remember Kelvin = Celsius + 273
Temperature Conversion Practice 85 + 273 = 358K Convert 85°C to K. ____________________ Convert 376K to °C. ____________________ Convert 154K to °C. ____________________ Convert -65°C to K. ____________________ Convert 0°C to K. _____________________ Convert 0K to °C. _____________________ 376 - 273 = 103 °C 154 - 273 = -119 °C 208K -65 + 273 = 273K 0 + 273 = 0 - 273 = -273 °C
Few Practice Problems V1/T1 = V2/T2 You heat 100 mL of a gas at 25 C to 80 C. What is the new volume of the gas? V2 = V1T2/T1 V2 = (100)(353)/298 V1 = T1 = V2 = T2 = 100 ml 25ºC X 80ºC + 273 = 298K V2 = 35300/298 V2 = 118.5 ml + 273 = 353K
Few Practice Problems V1/T1 = V2/T2 You have 200 mL of a gas at 55 C and you freeze it to 0 C. What is the new volume? V2 = V1T2/T1 V2 = (200)(273)/328 V1 = T1 = V2 = T2 = 200 ml 55ºC X 0ºC + 273 = 328K V2 = 54600/328 V2 = 166.5 ml + 273 = 273K
Few Practice Problems V1/T1 = V2/T2 A 150 mL sample of gas is at 125 K. After cooling the new volume is 80 mL. What is the new temperature? T2 = V2T1/V2 T2 = (80)(125)/150 V1 = T1 = V2 = T2 = 150 ml 125K 80 ml X T2 = 10000/150 T2 = 66.67K
Gay-Lussac’s Law P1/T1 = P2/T2 • Shows relationship between pressure (P) and temperature (T). If Temperature increases, so does the pressure. • Based on Charles’ Law. • Volume remains constant. • Like Charles’ Law, all temperature units must be in KELVIN. • Used in pressure cookers and autoclaves.
Practice P1/T1 = P2/T2 A soda bottle with a temperature of 25ºC and 3 atm of pressure was put into a freezer with a temperature of –1°C. What is the pressure on the bottle inside the freezer? P2 = P1T2/T1 P1 = T1 = P2 = T2 = 3 atm 25ºC X -1ºC P2 = (3)(272)/298 + 273 = 298K P2 = 816/298 P2 = 2.74 atm + 273 = 272K
Combined Gas Law • Combines Boyle’s Law, Gay-Lussac’s Law, and Charles’ Law. • Shows the relationship of Pressure, Volume and Temperature.
Combined Gas Law • Derived from Boyle’s, Gay-Lussac, and Charles Law. • Used when both temperature and pressure changes. • Can be used to find a constant. • If two things increase, one thing will decrease. • Math was used to derive the law.
1. A gas has a volume of 800.0 mL at -23.00 °C and 300.0 torr. What would the volume of the gas be at 227.0 °C and 600.0 torr of pressure? P1V1 = P2V2 T1 T2 P1 = V1 = T1 = P2 = V2 = T2 = 300 torr 800 ml -23ºC 600 torr X 227.0ºC V2 = P1V1T2 T1 P2 + 273 = 250K V2 = (300)(800)(500) (250)(600) V2 = 800 ml + 273 = 500K
Remember this… • When you are working with Charles’ Law and Combined Gas Law, make sure you have the proper units! • The laws help us predict the behavior of gases under different circumstances.
How is this possible? KC-135 Jet Rail Car
Avogadro’s Law V1/n1 = V2/n2 • Allows us to calculate the number of moles (n) of a gas with in a volume (V). • Pressure and Temperature remains the same. • If volume increases, so does the number of moles.
Practice V1/n1 = V2/n2 In 150 mL sample, there are 2.5 grams of Cl2 gas, if I double the volume to 300 mL how much Cl2 gas in moles, is in the new sample? n2 = V2 n1/ V1 V1 = n1 = V2 = n2 = 150 ml 2.5g 300 ml x n2 = (300)(0.147)/150 n2 = 44.1/150 n2 = 0.294 m ÷ 17g/m = 0.147 m
Ideal gas law • Formula: PV= nRT • P= Pressure in atmospheres • V= Volume in Liters • n= number of moles of a gas • R= constant, 0.0821 L • atm / mol • K • T= Temperature in Kelvin
Ideal Gas Law • An ideal gas is a gas that obeys Boyle’s and Charles’ Law. • Based on the Kinetic Theory. • Shows the relationship between Pressure, Volume, number of moles and Temperature. • Make sure everything has the proper unit. • Can be used to figure out density of gas or determine the behavior of a tire.
Practice PV = nRT How many moles of gas are contained in 890.0 mL at 21.0 °C and 750.0 mm Hg pressure? ÷ 760 mmHg/atm = 0.987 atm P = V = n = R = 0.0821 Latm/molK T = 750.0 mm Hg 890.0 ml X 21.0ºC ÷ 1000 ml/L = 0.89 L n = PV/RT n = (0.987)(0.89)/(0.0821)(294) n = 0.878/24.1 n = 0.036 m + 273 = 294 K