1 / 27

Well Completion Design for Tight-Gas Formations M. Y. Soliman, PhD

Well Completion Design for Tight-Gas Formations M. Y. Soliman, PhD. September 20, 2006 Mendoza, Argentina. Completion of Tight gas sand. Various completion options Fluid Flow GeoMechanics. Successful Completion Optimization. Set up realistic expectations

derry
Télécharger la présentation

Well Completion Design for Tight-Gas Formations M. Y. Soliman, PhD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Well Completion Design for Tight-Gas FormationsM. Y. Soliman, PhD September 20, 2006 Mendoza, Argentina presentation to Repsol by MYS on 9/13/06

  2. Completion of Tight gas sand • Various completion options • Fluid Flow • GeoMechanics presentation to Repsol by MYS on 9/13/06

  3. presentation to Repsol by MYS on 9/13/06

  4. Successful Completion Optimization • Set up realistic expectations • Consider various completion options presentation to Repsol by MYS on 9/13/06

  5. Successful Completion Optimization • Set up realistic expectations • Reservoir Characterization • Well tests, Logging, and core data • production analysis of offset well • Stress field • Understanding of reservoir fluid properties • Realistic modeling presentation to Repsol by MYS on 9/13/06

  6. Successful Completion Optimization • Optimize completion • Various completion strategy • Set optimization criterion or criteria • Define parameters that affect the optimum design • Fracture geometry, conductivity, height • Reservoir properties • Realistic modeling presentation to Repsol by MYS on 9/13/06

  7. Some of the Possible completion types • Vertical well • Fractured vertical well • MLT • Radially distributed, kicked off in the middle of the formation • Vertical distribution • Fractured horizontal well presentation to Repsol by MYS on 9/13/06

  8. presentation to Repsol by MYS on 9/13/06

  9. presentation to Repsol by MYS on 9/13/06

  10. Investigated properties • Permeability 0.005, 0.05, 0.1 md • Height 400 ft, also looked at 100 and 20 ft • Pressure 4000 psi • Fracture Parameters • half length 400 ft, Conductivity, 1750 md-ft • MLT • 6 arms 550 ft each + the vertical well • Horizontal well, • 1320 ft • Four fractures presentation to Repsol by MYS on 9/13/06

  11. Effect of completion type presentation to Repsol by MYS on 9/13/06

  12. Effect of completion type presentation to Repsol by MYS on 9/13/06

  13. Effect of completion type presentation to Repsol by MYS on 9/13/06

  14. Vertical Well Pressure Distribution presentation to Repsol by MYS on 9/13/06

  15. Fractured Vertical Well pressure Distribution presentation to Repsol by MYS on 9/13/06

  16. MLT pressure Distribution presentation to Repsol by MYS on 9/13/06

  17. Cross section presentation to Repsol by MYS on 9/13/06

  18. Frac HW pressure Distribution presentation to Repsol by MYS on 9/13/06

  19. Refrac and multiple Fractures • One fracture • Two perpendicular fractures • Multiple fractures. presentation to Repsol by MYS on 9/13/06

  20. presentation to Repsol by MYS on 9/13/06

  21. One-Frac case presentation to Repsol by MYS on 9/13/06

  22. Two-Frac case presentation to Repsol by MYS on 9/13/06

  23. GeoMechanics effect • Depletion • Stress interference presentation to Repsol by MYS on 9/13/06

  24. Effect of pressure dependant permeability and porosity presentation to Repsol by MYS on 9/13/06

  25. Stress Interference in Fractured Horizontal Well presentation to Repsol by MYS on 9/13/06

  26. Annulus Pressure, Tubing Rate, & Annulus Rate A C Annulus Pressure (psi) A Slurry Rate (bpm) C Flowback Rate (bpm) C 3000 40 35 2500 30 2000 25 1500 20 (psi) (bpm) 15 1000 10 500 5 0 0 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 7/10/2003 7/10/2003 Time presentation to Repsol by MYS on 9/13/06

  27. Conclusions • The lower the permeability, the more attractive fracturing. • Fracturing horizontal wells is the most promising technique in thick, tight gas formations. • The geomechanics effect on complex reservoir performance should always be considered, especially when creating multiple fractures in horizontal wells • Multiple fracturing from a wellbore is a fast growing area of technology presentation to Repsol by MYS on 9/13/06

More Related