1. Alcatel lucent 4A0-101 Exam Nokia Network Routing Specialist Questions & Answers (Free - Demo Version) Thank you for Downloading 4A0-101 exam PDF Demo Buy Full Product Here: https://officialdumps.com/updated/alcatel-lucent/4a0-101-exam-dumps/

2. PRACTICE TEST + QUESTION AND ANSWERS PDF Question 1 When a router receives an IP packet, but does not fnd a match in the routnn table for the destnaton IP address, what actons are performed by the router? A. The packet is fooded out all router interfaces. B. The packet is dropped and an ICMP unreachable messane is sent back to the source. C. The packet is silently discarded. D. The packet is fooded out all interfaces and an ICMP unreachable messane is sent. Aoswern B Question 2 Which of the followinn statements renardinn distance vectors protocols are true? (Choose two answers). A. RIPv1, RIPv2, and BGP are distance vector protocols. B. OSPF and IS-IS are distance vector protocols. C. Routnn tables are exchanned between neinhbors; however, no routnn table is transmited beyond the immediate neinhbor. D. Distance vector protocols use the Dijkstra SPF alnorithm. E. Routers that partcipate in distance vector routnn protocols maintain full knowledne of distant routers and how they interconnect Aoswern A, C Question 3 Click the exhibit buton. Routers R1 „ R2, and R3 are runninn a classful routnn protocol between them. Assuminn that router Page | 1 Page | 1

3. PRACTICE TEST + QUESTION AND ANSWERS PDF R1 advertses all directly connected networks, how will these networks be represented in router R3's routnn table? A. Router R3's routnn table can only contain one of the routes, which will result in route fappinn. B. Router R3's routnn table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24. C. The networks will be represented with one entry of 10.0.0.0/8 in router R3's routnn table. D. The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table. Aoswern C Question 4 In an IP datanram, which of the followinn felds identfes the receivinn applicaton? A. The protocol feld of the transport layer header. B. The port feld of the transport layer header. C. The protocol feld of the network layer header. D. The port feld of the network layer address. Aoswern B Question 5 Statc routnn will be used in a network between a corporate head ofce, with many connected networks, and a branch ofce, with one connecton to the head ofce. Which of the followinn best describes the likely confnuraton? A. The corporate head ofce router will have a default route and the branch site will have a more specifc statc route. B. The corporate head ofce router and the branch ofce router will both have specifc statc routes. C. The corporate head ofce router and the branch router will both have default routes. D. The corporate head ofce router will have a more specifc statc route and the branch ofce router will have a default route. Aoswern D Question 6 Click the exhibit buton. Page | 2 Page | 2

4. PRACTICE TEST + QUESTION AND ANSWERS PDF What is the command to confnure a statc route on the Alcatel-Lucent 7750 SR router R1 to reach the network behind router R2? A. confnure router statc-route 139.120.121.0/24 next-hop 138.120.199.2 B. confnure router statc-route 139.120.121.0/24 next-hop 138.120.199.1 C. confnure router statc-route 138.120.199.2/24 next-hop 138.120.199.1 D. confnure router statc-route 139.120.121.0/24 next-hop 139.120.121.2 Aoswern A Question 7 There is an IP host with IP address 10.2.3.1. A statc route is created, usinn the "confnure router statc-route 10.2.3.0/24 next-hop 10.1.2.1" command. What is the correct traceroute command to test this statc route on an Alcatel-Lucent 7750 SR? A. traceroute 10.2.3.1 B. traceroute 10.2.3.1 next-hop 10.1.2.1 C. traceroute next-hop 10.1.2.1 D. traceroute does not work on the Alcatel-Lucent 7750 SR. E. traceroute 10.1.2.1 Aoswern A Question 8 Click the exhibit buton. A statc route is created on router R1 "usinn the "statc-route 0.0.0.0/0 next-hop 10.3.3.2" command. What command can be used to test the statc route on an Alcatel-Lucent 7750 SR? A. pinn statc 10.5.5.5 Page | 3 Page | 3

5. PRACTICE TEST + QUESTION AND ANSWERS PDF B. pinn statc 0.0.0.0/0 C. pinn 10.5.5.5 D. pinn 0.0.0.0 Aoswern C Question 9 What is the default preference value for a statc route in the Alcatel-Lucent 7750 SR? A. 0 B. 5 C. 10 D. 15 Aoswern B Question 10 Which of the followinn statements apply to link state protocol behavior? Choose three answers. A. Routers broadcast the entre route table to all neinhbors. B. Informaton about directly connected links is sent to all neinhbors. C. An adjacency database is maintained by each router. D. The sequence number for an update is incremented as it is fooded from router to router. E. The topolonical database is the same for all routers in a sinnle area. Aoswern B, C, E Question 11 Click the exhibit buton. Page | 4 Page | 4

6. PRACTICE TEST + QUESTION AND ANSWERS PDF What trinners convernence of the routnn protocol when the link between switch 1 and switch 2 noes down? A. Convernence is trinnered when the adjacency between routers R1 and R2 drops as a result of Hello tmeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converned. B. Convernence is trinnered when the physical interfaces between routers R1 and R2 no down. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converned. C. Convernence will not be trinnered because switches cannot run routnn protocols between them. D. Convernence is trinnered when the switches notfy the routers about the link state informaton. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converned E. Convernence is trinnered when an LSA is sent from router R1 to router R2 to indicate that the link is down. At this point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent routers. Once the process is complete for all routers, the networks have converned. Aoswern A Question 12 What are the default Hello and Dead tmer intervals for OSPF on the Alcatel-Lucent 7750 SR? A. 5 and 15 seconds B. 10 and 30 seconds C. 5 and 20 seconds D. 10 and 40 seconds Aoswern D Question 13 What causes an adjacency to channe from down to two ways? A. When a link state update is received in response to a link state request. B. When a router receives a Hello packet that contains its own router ID in the neinhbor list from a neinhbor. C. When a router receives a database descripton packet from a neinhbor. D. When a link state acknowlednement is received in response to a link state update. Aoswern B Question 14 Click the exhibit buton. Page | 5 Page | 5

7. PRACTICE TEST + QUESTION AND ANSWERS PDF In the topolony shown, router R1 is an ASBR confnured to export external routes to OSPF. Assuminn that there are no stub networks, which of the followinn statements renardinn type 4 LSA neneraton is true? A. Router R1 nenerates a type 4 LSA that is fooded to areas 0, 1, and 2. B. Router R3 nenerates a type 4 LSA that is fooded to areas 0, 1, and 2. C. Router R3 nenerates a type 4 LSA that is fooded to areas 0 and 2. D. Router R3 nenerates a type 4 LSA that is fooded to area 0, and router R6 nenerates a type 4 LSA that is fooded to area 2. Aoswern D Question 15 Which of the followinn commands can be used to display the number of SPF computatons that have been performed on a router? A. show router ospf area <area-id> B. show router ospf neinhbor C. show router ospf interface D. show router ospf status Aoswern A Question 16 Which of the followinn statements describe the major features of OSPF? Choose two answers. A. Fast reroute capability B. Control trafc prioritiaton C. Route redistributon D. Trafc ennineerinn extensions E. Cut throunh forwardinn Page | 6 Page | 6

8. PRACTICE TEST + QUESTION AND ANSWERS PDF Aoswern C, D Question 17 Click the exhibit buton. What can you deduce from the show command on router R6? A. The router R6 interface is in a mult-access senment. It is neither the DR nor the BDR for the senment. The DR for this senment would be the router with router ID 10.10.10.5. B. The router R6 interface is in a mult-access senment. It is neither the DR nor the BDR for the senment; however, this command does not indicate whether 10.10.10.3 or 10.10.10.5 is the DR or BDR. C. The router R6 interface is in a mult-access senment. It is the BDR, which is why it is not adjacent to the other routers. D. The router R6 interface is in a mult-access senment. It is neither the DR nor the BDR for the senment. The DR for this senment would be the router with router ID 10.10.10.3. Aoswern B Question 18 Click the exhibit buton. Page | 7 Page | 7

9. PRACTICE TEST + QUESTION AND ANSWERS PDF In the topolony shown, router R1 is an ASBR confnured to export external routes to OSPF. How many type 4 LSAs will be present in the network? A. One. B. One for each of the routers in area 0 C. One for each of the external routes exported by router R1. D. Type 4 LSAs are not nenerated in this network topolony. Aoswern D Page | 8 Page | 8

10. For Trying Free 4A0-101 PDF Demo Get Updated 4A0-101 Exam Questions Answers PDF Visit Link Below https://officialdumps.com/updated/Alcatel lucent/4A0-101-exam-dumps/ Start Your 4A0-101 Preparation