1 / 43

CIMON PLC

CIMON PLC. KDT Systems Co., Ltd. Why CIMON PLCs ?. All CPU share the same programming environment (CICON) No additional training needed for up/down sizing of control system Though BP series are small sized PLC, they inherit powerful functionalities from higher series of CIMON PLCs (CP/XP).

dougal
Télécharger la présentation

CIMON PLC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CIMON PLC KDT Systems Co., Ltd.

  2. KDT SYSTEMS

  3. Why CIMON PLCs ? • All CPU share the same programming environment (CICON) • No additional training needed for up/down sizing of control system • Though BP series are small sized PLC, they inherit powerful functionalities from higher series of CIMON PLCs (CP/XP) KDT SYSTEMS

  4. Why CIMON PLCs ? • CP and XP CPU share the same modules • I/O modules, special function modules, power, base .... • Provides big merit on maintenance as well as cost. KDT SYSTEMS

  5. Why CIMON PLCs ? • Fully verified network compatibility • not only between PLCs • but also SCADA and Panels (TOUCH, XPanel) KDT SYSTEMS

  6. What is different ? : Technologies • How many PLC manufacturers support redundant system in all around the world ? • CIMON supports redundant PLC CPU system. • and we have some good references as power plant. KDT SYSTEMS

  7. Redundant CPU Details KDT SYSTEMS

  8. What is different ? : Expansion • Innovative base expansion system • Provides easy engineering with simple cable • Removes the distance limit between bases • Plays the same role of remote I/O, but faster. • Expansible up to 16 bases Category 5, 10Base-T, Max 100m KDT SYSTEMS

  9. Expansion numner setup byrotaryswitch LOCAL CPU EXPANSION #1 EP02A • 2 Port • 10Mbps Ethernet EXPANSION #2 EXPANSION #14 EP01A • 1 Port • 10Mbps Ethernet EXPANSION #15 EXPANSION #16 KDT SYSTEMS

  10. What is different ? : Ethernet • Take the internet on your fields • Even BP supports the ethernet. (option) • Remote maintenance by internet : The CICON can connect with a PLC though internet. KDT SYSTEMS

  11. What is different ? : CICON • Dialog based configuration • Removes DIP switches from special function modules • Dialog based programming • Generates sequence program automatically • PID, Protocol, Network configurations • Special function card configurations • Thermistor, Loadcell, position (pulse output) • Continued  .... KDT SYSTEMS

  12. Dialog based programming KDT SYSTEMS

  13. CPU Specifications

  14. CPU Specification : XP KDT SYSTEMS

  15. CPU Specification : CP • CP3P : Removable flash memory KDT SYSTEMS

  16. CPU Specification : BP KDT SYSTEMS

  17. CPU Specification : BP BP32M • Abundant program capacity: • 8,000 Step • Device Range: • Internal Relay: 4,096 Points • Data Memory: 5,000 Words • Max. 3 block expansion BP16M • Abundant program capacity: • 4,000 Step • Device Range: • Internal Relay: 4,000 Points • Data Memory: 1,000 Words • Not expansible KDT SYSTEMS

  18. Basic Modules

  19. Power • SPA cannot be used with analog/temperature modules KDT SYSTEMS

  20. Base KDT SYSTEMS

  21. Digital Input XD16A XD16B • 16 DC 24V Input • Photo coupler isolation XD32C XD32B • 32DC 24V Input • Photo coupler isolation XA08A XA08B • 8AC Input XY16DR • 8 24Vdc Input • 8 Relay Output KDT SYSTEMS

  22. Digital Output YR16A • 16 Relay • 2 Amp / 240VAC YT16A YT16B • 16 Tr. Output • 0.5A / 24V • Sink /Source YS08A • 8SSR • 100~240Vac YT32A YT32B • 32Tr. Output • 0.2A / 24V • Sink /Source KDT SYSTEMS

  23. Analog Input • All settings are configured by CICON • Input Voltage: 0 ~ 5V, 1 ~ 5V, 0 ~ 10V, -10 ~10V • Input Current : 0 ~ 20mA, 4 ~20mA • Resolution : 14 bit • Photocoupler isolated KDT SYSTEMS

  24. Analog Output • All settings are configured by CICON • Output Voltage: -10 ~10V • Output Current : 4 ~20mA • Resolution : 14 bit • Photocoupler isolated. KDT SYSTEMS

  25. Special Function Modules

  26. RTD • 4Channels • All settings are configured by CICON • Resolution : 14 bit • Real temp. value provided (in C, F) • Resolution in Temp. : 0.1 C • Photo coupler isolated KDT SYSTEMS

  27. Thermocoupler TC04A • 4Channels • All settings are configured by CICON • Resolution : 14 bit • Real temp. value provided (in C, F) • Resolution in Temp. : 0.1 C • Photo coupler isolated KDT SYSTEMS

  28. Thermistor TH08A • 8 Channels • All settings are configured by CICON • includes resistance table input • Type : NTC thermistor • Resolution : 14 bit • Real temp. value provided (in C, F) • Resolution in resistance : • 100Ω ~ 40kΩ : 1Ω • 40kΩ ~ 400kΩ: 10Ω • 400kΩ ~ 1MΩ : 30Ω KDT SYSTEMS

  29. Loadcell WG02A /WG04A • 2 or 4 channels loadcell input ( ~ 3mV/V) • 1/200,000 resolution • Embedded batch process control (unloading/mixing/filling/bin) KDT SYSTEMS

  30. High Speed Counter • 2 Channels • All settings are configured by CICON • 1-Phase input or 2-Phase input • 32 bit counter • Speed : Max. 200 kPPS • Provides comparator output (<, =, >) KDT SYSTEMS

  31. Pulse Output / Positioning PS02A • 2 axis • Line driver pulse output (RS422A) • All settings are configured by CICON • Position parameter / tables • Supports 2 axis linear/arc interpolation • Speed : Max. 1 MPPS KDT SYSTEMS

  32. Communication& Network

  33. Serial Communication • Application Protocol • HMI-Protocol • MODBUS/RTU Slave & Master • DNP3.0 • PLC Link : Max. 32 stations • Loader (CICON) communication • Supports modem connection • Embedded RS232C-RS422/485 converter KDT SYSTEMS

  34. Typical Serial Application Plays a role of RS232C-RS485 Converter KDT SYSTEMS

  35. Remote Network by Modem Leased Line Modem (DSU) or Dial-Up Modem KDT SYSTEMS

  36. Ethernet • No limit on number of EC01A with a CPU • Application Protocol • HMI-Protocol, MODBUS/TCP, DNP3.0 • PLC Link : Max. 64 stations • Loader (CICON) communication • Protocol Stack • ARP, ICMP, IP, UDP, TCP • 10BaseT, 10 Mbps KDT SYSTEMS

  37. HMI Link by Ethernet KDT SYSTEMS

  38. PLC Link by Ethernet KDT SYSTEMS

  39. Data Logger LG32A / LG64A • Data log buffer for PLC • Logged data are retained in PLC while communication fail. • All logged data are transmitted to SCADA after communication recover. • Embedded communication • Protocol : HMI Protocol • Port : RS232C (supports cable / dial-up modem) • Internal non-volatile log memory: 32 MB / 64MB KDT SYSTEMS

  40. BP Series Expansion Blocks

  41. Expansion block naming : BP CM2 – BP(1)E(2)(3) Series Name Output Type T: Digital TR Output(Sink) C: Digital TR Output(Src) R: Digital Relay Output A: Analog Output O: No Output Number of Points 04, 16, 32 Input Type D: Digital DC 24V Input A: Analog Input R: RTD Input T: TC Input O: No Input Module Type E : Expansion KDT SYSTEMS

  42. Digital I/O Expansion KDT SYSTEMS

  43. Analog Expansion Analog module can be expanded up to 2 modules. KDT SYSTEMS

More Related