Download
slide1 n.
Skip this Video
Loading SlideShow in 5 Seconds..
Pure IP PBX KX-TDE100/200 MPR 2.00 PowerPoint Presentation
Download Presentation
Pure IP PBX KX-TDE100/200 MPR 2.00

Pure IP PBX KX-TDE100/200 MPR 2.00

146 Vues Download Presentation
Télécharger la présentation

Pure IP PBX KX-TDE100/200 MPR 2.00

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Pure IP PBX KX-TDE100/200 MPR 2.00 Panasonic Communications CO.,LTD.

  2. Pure IP-PBX KX-TDE Series Product Line Up TDE100/200 MPR 1.00 TDE100/200 MPR 2.00 Version Main Function MPR 1.0 - Peer to Peer Communication - KX-NT300 Series IP-PT - SIP Phone Compatible - Remote Alarming Features MPR 2.0 • KX-TDA0177 (CSLC16) • Improved Built-in SVM2 • KX-TDA0192/4 (ESVM) • 8 Digits VM Integration • Support T38 (ITU standard for sending FAX)

  3. Enhancement Features of TDE100/200 MPR 2.0 -TDE100/200 MPR 2.0 Main Feature Enhancement (TDE100/200 MPR 1.0 → 2.0) Option Requirement KX-TDA0158CE (8ch-CS) Support. - 16 CS/Cabinets No Ver.1 KX-TDA0177 (16 SLT: CSLC16) Support - 10 KX-TDA0177 Cards/Cabinets (System Total: 640) No Ver.2 KX-TDA6178 (24 SLT: ECSLC24) - Only TDA600 supported Not supported Improved Built-in SVM2 - Adding the Message Feature No Ver.2 KX-TDA0192 (ESVM-2), KX-TDA0194 (ESVM-4) Support - Simplified Voice Message (SVM) Function. No Ver.2 Moving From SVM to DISA - Breakout to DISA after SVM Mailbox answers. No Ver.2 High Quality OGM Record. - WAV file copy to ESVM-2/ESVM-4. No Ver.2 Support T38 - ITU standard for sending FAX No Ver.2

  4. Enhancement Features of TDE100/200 MPR 2.0 -TDE100/200 MPR 2.0 Main Feature Enhancement (TDE100/200 MPR 1.0 → 2.0) Option Requirement 8 digits VM integration with TVM Ver.2.1 - Centralized VM with PBX code (7+10+20000) network is possible. No Ver.2 32 Tenant Support - Only TDA600 supported Not supported Check In/Out operation by CSTA commands. - CSTA commands support hotel function (Check In/Out). No Ver.2 No Ver.2 More than 1000 DDI Destinations - 1000 DDI Table (not match) → TIE Routing Table SMDR: Extension number and VerificationCode Output - MPR 3.1 : Only Verification code out put No Ver.2

  5. Enhancement Features of TDE100/200 MPR 2.0 -TDE100/200 MPR 2.0 Main Feature Enhancement (TDE100/200 MPR 1.0 → 2.0) Option Requirement TRS Function Improvement - Independent TRS table 2-6 No Ver.1 Music On Hold by DDI/DIL tenant base - MPR.3.1: Extension tenant base. No Ver.1 Caller ID notification when VM transfer - MPR.3.1: The caller ID is not sent to the VM. No Ver.1 Call Log on Busy Extension (Busy/FWD-All) - MPR.3.1: No-Answer Call Log only on free extension. No Ver.1 D-PT Disconnect/Re-connect status to SMDR. - Not supported. Not supported ICD-Group Call Log - No-answer calls and Answered calls No Ver.1 Automatic Call Waiting for Extension call - Without BSS operation the automatic call waiting function can be performed. No Ver.1 KX-NT300 Series Support - NT366/Self-labeling/60 flexible key are not supported. No Ver.2

  6. No Ver.1 No Ver.1 No Ver.1 No Ver.1 No Ver.1 “ Enhancement Features of TDE100/200 MPR 2.0 -TDE100/200 MPR 2.0 Main Feature Enhancement (TDE100/200 MPR 1.0 → 2.0) Option Requirement CTI Improvements Retrieve operation using CTI application. - Retrieve by CTI application → Handset is activated. Dialing information before ARS modification. - Remove PIN code from the dialling information/data. Speed dial name is informed to CTI application. Network Connection Improvements CLIP Modification - Incoming CLIP 012345 → Outgoing CLIP 12345. Caller-ID Modification Table - CLIP Modification table or Caller-ID modification table.

  7. Enhancement Features of TDE100/200 MPR 2.0 PC Maintenance Console (PCMC) Improvements (TDE100/200 MPR 1.0 → 2.0) Option Requirement Key Label (PT/DSS Console) Name Print out Function - Edit / Print out / Save to file. No Ver.2 Russian PCMC menu is supported No Ver.1 Same numbering plan in quick dial entry. - Automatic rerouting function works over Ext. numberingtype network too. No Ver.2 PCMC supports “T”, “P” and “W” for analogue modem. - “T” = Switch Pulse to DTMF, “P”= Pause, “W”=Wait No Ver.1 The Profile Setup menu is moved - “Toll” → “Connect”. No Ver.1 Hide Password (Batch mode) - DSYS BR, CN, RU, UA, NE-SP Version, hide the system password. No Ver.1

  8. Option Requirement No Ver.1 No Ver.1 No Ver.1 No Ver.1 “ Enhancement Features of TDE100/200 MPR 2.0 Modification of Un-specified operation - The same modification as TDA30 MPR 4.0 All QSIG lines become busy by TIE call. - Common extension numbering function (TIE call) with QSIG line. Error code 050. - Delete the error code 050 (Error code of the centralized VM function) Centralized VM function does not work over QSIG. - If CF/CT on QSGI is set to enable. System reset by CTI application. - If SXDP-PS number is accessed by CTI application.

  9. KX-TDA0177 Support 16 SLT Card with Caller ID function (CSLC16)

  10. KX-TDA0177 Support - 1 16-Port Single Line Telephone Extension Card with Caller ID (FSK) Card. Cable Max. Distance ø 0.4 mm 698 m ø 0.5 mm 1128 m ø 0.6 mm 1798 m CAT 5 1128 m KX-TDA0177 LPR Software should be 2.000 or later.

  11. KX-TDA0177 Support - 2 Max. Extension Card Power Unit TDE100 TDE200 DHLC-8 8 6 8 DLC-8 - DLC-16 - SLC-8 8 CSLC-16 16 ESLC-16 16 EMSCL-16 16 IP-Ext-16 -

  12. Improved Built-in SVM2 Adding the Message Feature

  13. Improved Built-in SVM2 Specification • Built-in SVM-2 (MPR 1.0) • - 2-ch SVM + 2-ch MSG (DISA) Card. • - Message Area : 125 (40/60120min/Card(Selectable)) • - DISA port : 2 • - Feature : SVM : 125 messages • Built-in SVM-2 (MPR 2.0) • - 2-ch SVM + 2-ch MSG (DISA) Card. • - Message Area : 125 (40/60120min/Card(Selectable)) • - DISA port : 2 • - Feature : SVM : 125 messages • (Mode) : MSG (DISA): : 64 OGM • : SVM+ MSG (DISA) : 61 messages + 64 OGM • - CO-CO Call Circuit • * Additional features

  14. Improved Built-in SVM2 Block Diagram TDE Data Bus 2-Ch IPCMPR MSG SVM 2-Ch Ext.201 Sheared Recording Memory (32MB) Ext.202 Ext.203 OGM-01 DISA-01 OGM-02 DISA-02 2-Ch OGM-xx OGM-63 OGM-64

  15. Improved Built-in SVM2 Installation/programming Built in SVM2 is assigned to “Enable” of SVM Feature and “Enable” of MSG Feature, when you initialize the system.

  16. Improved Built-in SVM2 Feature (Mode) : SVM Mode TDE Data Bus IPCMPR SVM SVM: 125 messages Recording time 40/60/120 min 2-ch SVM MSG Ext.201 OGM1-64 Ext.202 DISA 1-2 2-ch Disable

  17. Improved Built-in SVM2 Feature (Mode) : MSG Mode TDE Data Bus IPCMPR MSG OGM: 64 messages Recording time 40/60/120 min 2-ch SVM MSG Ext.201 OGM1-64 Ext.202 DISA 1-2 2-ch Disable

  18. Improved Built-in SVM2 Feature (Mode) : SVM + MSG Mode TDE Data Bus IPCMPR SVM + MSG OGM: 64 messages Recording time 40/60/120 min 2-ch SVM MSG SVM: 61 messages, even if we record one OGM. Recording time: It is depending up on OGM recording time. Ext.201 OGM1-64 Ext.202 DISA 1-2 2-ch When we use the Moving From SVM to DISA Feature (MPR 2.0 New Feature) , we have to select this mode.

  19. Improved Built-in SVM2 Unable function of Built-in SVM 1- It is not possible to export (backup) nor import OGM messages (MSG-feature) to/from Built-in SVM card. 2- ”High quality recording of music” is unable to use, even though you select “High”.

  20. KX-TDA0192/0194 Support Enhanced Simplified Voice Message (ESVM) Card

  21. KX-TDA0192/0194 (ESVM) - 1 Hardware KX-TDA0192 (ESVM-2) KX-TDA0194 (ESVM-4)

  22. KX-TDA0192/0194 (ESVM) - 2 Hardware Specification KX-TDA0192 (ESVM-2) - 2-ch SVM + 2-ch MSG (DISA) Card. - Message Area : 250/Card (20/60/120min/Card (Selectable)) - DISA port : 2 - Feature : SVM : 250 messages (Mode) : MSG (DISA): : 64 OGM : SVM+ MSG (DISA) : 186 messages + 64 OGM - CO to CO Call Circuits. • KX-TDA0194 (ESVM-4) • 2 x 2-ch SVM + 4-ch MSG (DISA) Card. • - Message Area : 2 x 250/Card (20/60/120min/Card (Selectable)) • DISA port : 4 • - Feature : SVM : 2 x 250 messages • (Mode) : MSG (DISA): : 64 OGM • : SVM+ MSG (DISA) : 2 x 186 messages + 64 OGM • - CO to CO Call Circuits.

  23. KX-TDA0192/0194 (ESVM) - 3 KX-TDA0192 Block Diagram TDA Data Bus 2-Ch TDA0192 MSG SVM 2-Ch Ext.201 Shared Recording Memory -1 (32MB) Ext.202 Ext.203 OGM-01 DISA-01 OGM-02 DISA-02 2-Ch OGM-xx OGM-63 OGM-64

  24. KX-TDA0192/0194 (ESVM) - 4 KX-TDA0194 Block Diagram TDA Data Bus 4-Ch TDA0194 MSG SVM-1 2-Ch Ext.201 Shared Recording Memory -1 (32MB) Ext.202 Ext.203 OGM-01 DISA-01 OGM-02 DISA-02 4-Ch OGM-xx DISA-03 SVM-2 2-Ch OGM-63 DISA-04 Ext.204 Shared Recording Memory -2 (32MB) Ext.205 OGM-64 Ext.206

  25. KX-TDA0192/0194 (ESVM) - 6 Combination Any combination with KX-TDA0191, TDA0192 and TDA0194 is possible. E.g. OPB-3 x 2 OPB-3 x 2 OPB-3 x 2 OPB-3 x 2 TDA0191 TDA0191 TDA0192 TDA0191 TDA0191 TDA0191 TDA0192 TDA0191 TDA0192 TDA0194 TDA0194 TDA0192 TDA0192 TDA0194 TDA0194 TDA0194 When cards of different types are installed, the shortest recording time is used. E.g. if a KX-TDA0194 card and a KX-TDA0191 card are installed, the maximum recording time at default will be about 8 minutes, high quality OGM recording is not possible, Wav file transfer function is not possible. OPB-3 Card • Can only be mounted to the Sub-slot-3/OPB3, when we use the SVM function. • Install two KX-TDA0192/0194 (with SVM function) needs two OPB-3 cards. • OPB-3 Card software should be 4.000 or later.

  26. KX-TDA0192/0194 (ESVM) - 7 Installation/programming Can only be mounted to the Sub-slot-3/OPB3, when we use the SVM function. Another ESVM card can work only MSG Feature

  27. KX-TDA0192/0194 (ESVM) - 8 Installation/programming OPB-3 When we use the SVM feature, we have to mount an ESVM card to the Sub-slot-3/OPB3, Slot-3 ESVM cards on the Slot-1 and 2 can work only MSG feature. Slot-2 OPB-3 Features Slot-1 Slot-3 TDA0192/4 SVM / MSG Slot-2 TDA0192/4 MSG only Slot-1 TDA0192/4 MSG only

  28. KX-TDA0192/0194 (ESVM) - 9 Install two KX-TDA0192/0194 (with SVM Feature) needs two OPB-3 cards. E.g. Two OPB-3 cards are installed in one cabinet. 1 x KX-TDA0192/0194 (SVM Feature) 1 x KX-TDA0192/0194 (SVM Feature) Two OPB-3 cards are installed in different cabinets.

  29. KX-TDA0192/0194 (ESVM) - 10 SVM Configuration - 1 (1 x KX-TDA0192) TDA Data Bus TDA0192 2-ch 2-ch SVM MSG Ext.201 OGM1-64 Ext.202 DISA 1-2 2-ch

  30. KX-TDA0192/0194 (ESVM) - 11 SVM Configuration - 2 (1 x KX-TDA0194) TDA Data Bus TDA0194 4-ch 2-ch SVM-1 MSG Ext.201 OGM1-64 Ext.202 DISA 1-4 4-ch 2-ch SVM-2 Ext.203 Ext.204

  31. KX-TDA0192/0194 (ESVM) - 12 SVM Configuration - 3 (2 x KX-TDA0192) TDA Data Bus TDA0192 No-1 TDA0192 No-2 2-ch 2-ch 2-ch 2-ch SVM MSG SVM MSG Ext.201 Ext.203 OGM1-64 OGM1-64 Ext.202 Ext.204 DISA 1-2 DISA 1-2 2-ch 2-ch Install two KX-TDA0192/0194 (with SVM function) needs two OPB-3 cards.

  32. KX-TDA0192/0194 (ESVM) - 13 SVM Configuration - 4 (1 x KX-TDA0192 + 1 x KX-TDA0194) TDA Data Bus TDA0192 TDA0194 2-ch 4-ch 2-ch 2-ch SVM MSG SVM-1 MSG Ext.201 Ext.203 OGM1-64 OGM1-64 Ext.202 Ext.204 DISA 1-2 DISA 1-4 2-ch 4-ch 2-ch SVM-2 Ext.205 Ext.206 Install two KX-TDA0192/0194 with SVM function needs two OPB-3 cards.

  33. KX-TDA0192/0194 (ESVM) - 14 SVM Configuration - 5 (2 x KX-TDA0194) TDA Data Bus TDA0194 No-1 TDA0194 No-2 4-ch 4-ch 2-ch 2-ch SVM-1 MSG SVM-1 MSG Ext.201 Ext.205 OGM1-64 OGM1-64 Ext.202 Ext.206 DISA 1-4 DISA 1-4 4-ch 4-ch 2-ch 2-ch SVM-2 SVM-2 Ext.203 Ext.207 Ext.204 Ext.208 Install two KX-TDA0192/0194 with SVM function needs two OPB-3 cards.

  34. KX-TDA0192/0194 (ESVM) - 15 KX-TDA0192 Block Diagram (Message Block) TDA Data Bus TDA0192 MSG SVM Saved for OGM SVM Shared Recording Memory (20/60/120 min) 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  35. KX-TDA0192/0194 (ESVM) - 16 KX-TDA0194 Block Diagram (Message Block) TDA Data Bus TDA0194 MSG SVM-1 Saved for OGM SVM Shared Recording Memory -1 (20/60/120 min) 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250 SVM-2 Saved for OGM SVM Shared Recording Memory -2 (20/60/120 min) 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  36. KX-TDA0192/0194 (ESVM) - 17 Feature (Mode) : SVM Mode TDA Data Bus TDA0192 2-ch SVM SVM: 250 messages Recording time 20/60/120 min 2-ch SVM MSG Ext.201 OGM1-64 Ext.202 DISA 1-2 2-ch Disable Message Block SVM Message Block 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  37. KX-TDA0192/0194 (ESVM) - 18 Feature (Mode) : MSG Mode TDA Data Bus TDA0192 2-ch OGM OGM: 64 messages Recording time 20/60/120 min 2-ch SVM MSG Ext.201 OGM1-64 Ext.202 DISA 1-2 Disable 2-ch No-used Message Block OGM SVM Message Block 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  38. KX-TDA0192/0194 (ESVM) - 19 Feature (Mode) : SVM + MSG Mode TDA Data Bus TDA0192 2-ch • SVM+OGM OGM: 64 messages Recording time 20/60/120 min 2-ch SVM MSG SVM: 186 messages, even if we record one OGM. Recording time: It is depending up on OGM recording time. Ext.201 OGM1-64 Ext.202 DISA 1-2 2-ch When we use the Moving From SVM to DISA Feature (MPR 5.0 New Feature) , we have to select this mode. Message Block OGM SVM Message Block 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  39. KX-TDA0192/0194 (ESVM) - 20 Feature (Mode) : SVM Mode TDA Data Bus TDA0194 4-ch SVM SVM: 2 x 250 messages Recording time 2 x 20/60/120 min 2-ch SVM-1 MSG Ext.201 OGM1-64 Ext.202 DISA 1-4 4-ch 2-ch SVM-2 Ext.203 Disable Ext.204 Message Block SVM Message Block-1 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250 Message Block-2 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  40. KX-TDA0192/0194 (ESVM) - 21 Feature (Mode) : MSG Mode TDA Data Bus TDA0194 4-ch OGM OGM: 64 messages Recording time 20/60/120 min 2-ch SVM-1 MSG Ext.201 OGM1-64 Ext.202 DISA 1-4 Disable 4-ch 2-ch SVM-2 Ext.203 Ext.204 No-used Message Block OGM SVM Message Block-1 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250 Message Block-2 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  41. KX-TDA0192/0194 (ESVM) - 22 Feature (Mode) : SVM + MSG Mode TDA Data Bus TDA0194 4-ch SVM+MSG OGM: 64 messages Recording time 20/60/120 min 2-ch SVM-1 MSG SVM: 2 x 186 messages, even if we record one OGM. Recording time: It is depending up on OGM recording time. Ext.201 OGM1-64 Ext.202 DISA 1-4 4-ch 2-ch SVM-2 When we use the Moving From SVM to DISA Feature (MPR 5.0 New Feature) , we have to select this mode. Ext.203 Ext.204 Message Block OGM SVM Message Block-1 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250 Message Block-2 1 2 3 4 - 62 63 64 65 66 67 - 247 248 249 250

  42. KX-TDA0192/0194 (ESVM) - 23 Installation/programming Can only be installed to the Sub-slot-3/OPB3, when we use the SVM function. Can not change Feature Has to be “OUS” mode to change Features

  43. KX-TDA0192/0194 (ESVM) - 24 Recording time 120 min (Low) 60 min (Middle) 20 min (High) Installation/programming It is system programming. Can not assign card by card base. SVM Floating Extension Number assignment.

  44. KX-TDA0192/0194 (ESVM) - 25 SVM Mailbox Size and Max. Recording Time MSG Function SVM Mailbox Max Recording Time (min) TDA0192 (2ch) Disable 250 120 Enable 186 120 - OGM recording time TDA0192+TDA0192 (4ch) Disable 500 (2x250) 240 (2x120) Enable 372 (2x186) 240 - 2 x OGM recording time TDA0194 (4ch) Disable 500 (2x250) 240 (2x120) Enable 372 (2x186) 240 - 2 x OGM recording time TDA0192+TDA0194 (6ch) Disable 750 (250+2x250) 360 (3x120) Enable 558 (186+2x186) 360 - 3 x OGM recording time TDA0194+TDA0194 (8ch) Disable 1000 (2x2x250) 480 (4x120) Enable 744 (2x2x186) 480 - 4 x OGM recording time Recording time is selected to 120 min (Low)

  45. Combination with B-SVM

  46. Combination of B-SVM/MSG/ESVM Any combination with Built-in SVM2/KX-TDA0191/0192/0194 is possible. E.g. OPB-3#1 OPB-3#2 IPCMPR TDA0194 TDA0191 B-SVM2 TDA0191 TDA0192 When cards of different types are installed, the shortest recording time is used. E.g. if a KX-TDA0194 card and a KX-TDA0191 card are installed, the maximum recording time at default will be about 8 minutes. Max. Cards (SVM/MSG mixed) • Max. 5 cards (Built-in SVM2+TDA0191 or TDA0192 or TDA0194). Max. SVM function Cards • Max. 2 cards • Built-in SVM2 + TDA0192 or TDA0194 • TDA0192 + TDA0192 • TDA0194 + TDA0194 • TDA0192 + TDA0194

  47. Combination of B-SVM/MSG/ESVM Installation/programming If we don’t want to use the Built-in SVM2 card, please program as follows; - SVM Feature : “Disable” - MSG Feature : “Enable” - Card status : “OUS”

  48. Combination of B-SVM/MSG/ESVM SVM Mailbox Size Max Recording Time (min) SVM Mailbox MSG Function 125 120 Built-in SVM2 Disable 61 120 - OGM recording time Enable 375 (1x250+125) Built-in SVM2+TDA0192 Disable 240 (2x120) 247 (1x186+61) 240 - 2 x OGM recording time Enable 240 (2x120) 625 (2x250+125) Built-in SVM2+TDA0194 Disable 240 - 2 x OGM recording time 433 (2x186+61) Enable TDA0192 Disable 250 120 Enable 186 120 - OGM recording time TDA0192+TDA0192 Disable 500 (2x250) 240 (2x120) Enable 372 (2x186) 240 - 2 x OGM recording time TDA0194 Disable 500 (2x250) 240 (2x120) Enable 372 (2x186) 240 - 2 x OGM recording time TDA0192+TDA0194 Disable 750 (250+2x250) 360 (3x120) Enable 558 (186+2x186) 360 - 3 x OGM recording time TDA0194+TDA0194 Disable 1000 (2x2x250) 480 (4x120) Enable 744 (2x2x186) 480 - 4 x OGM recording time Recording time is selected to 120 min (Low)

  49. KX-TDA0192/0194 Support Simplified Voice Message (SVM) Function (Same as TDA30 SVM Function)

  50. KX-TDA0192/0194 (SVM Function) - 1 SVM Function Conditions • - An extension can have only one mail box. • PT/SLT/PS/IP-PT/IP-Softphonecan be assigned its own message box. (But, Not ISDN extension) • The following features are not supported. • - Recording SVM personal greeting from external terminal. • - LCS, 2-Way recording. • - Call Deflection. • - E-mail Integration. • - Save personal greetings and recorded messages. • A voice mail system can connect together with SVM card. • Greeting message can not be used as ICD-Group time table OGM.