1 / 10

X-103 Straw Rockets

X-103 Straw Rockets. Tools and Materials. 8 ½”x11” 20lb copier paper 8 ½”x11” 64lb card stock 8 ½”x11” cardboard Foamie sheets. Rubber bands Paperclips Coffee stirrer sticks Straws (one size must fit into a larger size) Dunkin Donuts and Starbucks have 2 straw sizes. Scotch tape

edunham
Télécharger la présentation

X-103 Straw Rockets

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. X-103 Straw Rockets

  2. Tools and Materials 8 ½”x11” 20lb copier paper 8 ½”x11” 64lb card stock 8 ½”x11” cardboard Foamie sheets Rubber bands Paperclips Coffee stirrer sticks Straws (one size must fit into a larger size) Dunkin Donuts and Starbucks have 2 straw sizes. Scotch tape Masking tape Scissors Glue gun Colored pencils 12” ruler

  3. Glider Wings and Tail + Rocket Fins Make crisp, accurate, straight folds. Fold Folding in half ensures that the right and left wings will be the same. Fold edge Cut out wings. 3” 3.5” Alternate wing design. Cut out 4 equal rocket fins. 2” Cut out tail. 1”

  4. Glider Wings and Tail + Rocket Fins Unfold wings. Roughly 3”. Roughly 6”. Alternate wing design. Cut 4 equal fins and bend a small flange so you can glue the fins to the fusaloge. Cut and fold tail as shown. Roughly 2”.

  5. Straw Fuselage Big straw. Small straw. You can find these two straw sizes at Starbucks or Dunkin Donuts. Cut the BIG straw roughly in half.

  6. Straw Fuselage 1) Pinch and tape or hot glue one end of each straw half. No air should get through. We will be making a straw rocket and a straw glider. 2) Cut out a 2“ diameter circle out of paper of Foamie. 3) Cut the circle in half. 4) Wrap each half circle into a cone and tape or hot glue.

  7. Straw Fuselage Hot glue the cone to the closed end of the BIG straw.

  8. Integrate Parts Hot glue wings, tail and fins onto the BIG straw halves. Insert the small straw inside the big straw fuselage and blow! It may help to wrap a small rubber band around the front of the fuselage to control the center of gravity!

  9. Hall of Fame Planes

  10. Air Show • Competitions: • Best looking. • Furthest distance. • Most accurate. • Longest flight time.

More Related