1 / 14

Kirchoff’s Rules

Kirchoff’s Rules. http://physics.bu.edu/~duffy/py106/Kirchoff.html. Junction: a point where at least three branches meet. Branch: a path connecting two junctions. Junction Rule:. Loop Rule:. ΣV = 0 The total voltage of the circuit is equal to 0. ΣI in = ΣI out

effie
Télécharger la présentation

Kirchoff’s Rules

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Kirchoff’s Rules

  2. http://physics.bu.edu/~duffy/py106/Kirchoff.html

  3. Junction: a point where at least three branches meet. Branch: a path connecting two junctions.

  4. Junction Rule: Loop Rule: ΣV = 0 The total voltage of the circuit is equal to 0. ΣIin= ΣIout The sum of the current going into a junction is equal to the sum of the current flowing out of a junction.

  5. Steps for solving for current using Kirchoff’s rules • Use the junction rule to write an equation for the currents in the circuit. • Use the loop rule and write equations for each loop. Use your finger to trace a path around the loop and be sure to end where you began. • Plug in what you know, to your loop equations. • Using the equation found by the junction rule, rearrange it so that you can substitute this equation in for one of your currents. • Simplify your equations. • Using a system of equations, one current variable should drop out and you will be left with one current variable you can solve for. • Use the value from step 6 to solve for the other two currents by plugging it in to the other equations.

  6. Example: Using Kirchoff’s rules, find the current in each branch. R1 = 6 Ω R2 = 4 Ω R3 = 4 Ω R4= 1 Ω Ε1 = 30 V E2 = 12 V E3 = 6 V

  7. Using the loop rule we get: left loop: E1–I1R1-I3R4-E3=0 right loop: E3+I3R4-I2R3-E2=0 Using the junction rule we get: I1 = I2+ I3

  8. Use the equations on the following slide, solve for I1, I2, I3.

  9. Power

  10. Power: The rate at which energy is transferred Power is equal to the current times the potential difference. P = IV Power is measured in Watts, denoted W.

  11. A car battery causes a current of 2.0 A through a lamp and produces 12 V across it. What is the power used by the lamp?

  12. A flashlight blub is rated at .9 W. If the light bulb drops 3 V, how much current goes through it?

  13. A circuit made of a battery and a resistor of 5 Ω has a current of 2 A. What is the power delivered to the resistor?

  14. Homework Pg 611 # 65, 66, 69, 70 • 960 W • 144 W • 19.1 A • 4.5 W Pg 615 # 1, 7 • .83 A 7) .00125 W

More Related