1 / 8

Zhenbin Li , Hui Ni Huawei Technologies IETF 87, Berlin, Germany

Role-Based State Advertisement for Multicast in MPLS/BGP IP VPNs draft-li-l3vpn-mvpn-role-state-ad-00. Zhenbin Li , Hui Ni Huawei Technologies IETF 87, Berlin, Germany. Motivations.

elaine
Télécharger la présentation

Zhenbin Li , Hui Ni Huawei Technologies IETF 87, Berlin, Germany

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Role-Based State Advertisement for Multicast in MPLS/BGP IP VPNs draft-li-l3vpn-mvpn-role-state-ad-00 Zhenbin Li, Hui Ni Huawei Technologies IETF 87, Berlin, Germany

  2. Motivations • Introduce a new type of Intra-ASI-PMSI A-D Route in BGP MVPN, this A-D Route contains additional mVRF’s Role & State info. • The goal is to optimize MVPN provision in some scenarios: • Easing Provision of mLDP P2MP LSP. • Reducing Unnecessary Traffic Replication. • Auto Provision of Egress Local Protection for P2MP TE.

  3. Scenario 1 - Easing Provision of mLDP P2MP LSP • In Role-Based Intra-AS I-PMSI A-D route, mVRF’s Root/Leaf Role information is supported. • It can facilitate the provision of mLDP to setup P2MP LSP: • Because all LEAF nodes can learn ROOT node’ IP Address thru this A-D Route, and send Mapping Msg to ROOT automatically • LEAF node no need to configure root information under mLDP protocol.

  4. Scenario 2 - Reducing Unnecessary Traffic Replication • Role-Based Intra-AS I-PMSI A-D route supports advertising Leaf Role with Primary/Backup status information • +---------------+ • | IP/MPLS | • | Network | • +----+ +----+ +----+Primary Egress • | CE1|-----| |-----------| |___ • +----+ | PE1| | PE2| <--\- C-Join • Ingress| |-------- +----+ \+----+ • +----+ \ | | CE2| • | \ +----+ /+----+ • | \| |____/ • | | PE3| • | +----+Backup Egress • | | • +---------------+ • CE2 multi-homes to two PEs(PE2 and PE3), suppose PE2 is Primary Egress PE • With help of new A-D Route, PE1 can learn the Egress Backup relationship between PE2/PE3, the bandwidth can be saved in the network sincePE1 can stop to setup the ingress replication tunnel or P2MP LSPs to Backup Egress PE3

  5. Scenario 3 - Local Protection of Egress Nodes • Role-Based Intra-AS I-PMSI A-D route supports advertising Leaf Role with Primary/Backup Relationship information • With the info in A-D route that PE1 is protected by PE2, Ingress PE5 could setup RSVP P2MP LSP with Egress Node Local Protection between PE1/PE2 BFD PE1 Data CE1 ES1 PE5 ES1 CE3 PE2 ES3 PE6 PE3 Data CE2 ES2 PE4 Main LSP ES2 Backup LSP • draft-chen-mpls-p2mp-egress-protection

  6. BGP Extensions: Role-Based Intra-AS I-PMSI A-D route • Role-Based Intra-AS I-PMSI A-D route Format : • RD with Originating Router's IP Addrare utilized to identify the mVPN VRF being advertised • R bit set to 1 to identify if the PE is root node. • RS field uses two bits to identify primary/backup state of root node • -- 0 means the PE is used as the primary root node. • -- 1 means the PE is used as the backup root node,but the protected root ‘s IP address is not specified. • -- 2 means the PE is used as the backup root node and the protected root 's IP address is specified

  7. BGP Extensions: Role-Based Intra-AS I-PMSI A-D route(Cont.) • L bit set to 1 to identify if the PE is Leaf node. • LS field uses two bits to identify primary/backup state of leaf node • -- 0 means the PE is used as the primary leaf node. • -- 1 means the PE is used as the backup leaf node. But the protected leaf node's IP address does not specified. • -- 2 means the PE is used as the backup leaf node and the protected leaf node's IP address is specified • Protected Root's IP Addris an optional field. It specifies ip address of the protected root node. The field value is valid only when RS field is set with value 2. • Protected Leaf's IP Addris an optional field. It specifies ip address of the protected leaf node. The field value is valid only when LS field is set with value 2.

  8. Next Steps • Solicit more comments & feedbacks • More scenarios will be taken into account • Revise the draft

More Related