1 / 28

Fiber Laser for ERL

Fiber Laser for ERL. Zach Ulibarri Mentor: Zhi Zhao. Introduction. Goal: Mode locked laser oscillator 50 MHz repetition rate Designed for emittance measurement. Laser Basics. Population inversion in gain medium. Laser Basics. Stimulated photon emission. Laser Basics.

elkan
Télécharger la présentation

Fiber Laser for ERL

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fiber Laser for ERL Zach Ulibarri Mentor: Zhi Zhao

  2. Introduction • Goal: • Mode locked laser oscillator • 50 MHz repetition rate • Designed for emittance measurement

  3. Laser Basics • Population inversion in gain medium

  4. Laser Basics • Stimulated photon emission

  5. Laser Basics • Light emits and repeats process

  6. Mode Locked Lasers • Saturable absorber Transmission Intensity

  7. Mode Locked Lasers • With saturable absorber in place, random noise can create pulses

  8. Mode Locked Lasers • How do we add sufficient noise to the cavity?

  9. Mode Locked Lasers • How do we add sufficient noise to the cavity?

  10. Artificial Saturable Absorber • Wave plates create phase shift induced intensity modulation

  11. Experimental Setup

  12. Top View

  13. Mode Locked Lasers 19.8ns

  14. Mode Locked Lasers • Detector is too slow FWHM suggests Pulse width = 1.22 ns

  15. Autocorrelator Measurement • Michelson interferometer creates small delay • Aligned pulses create second harmonic generation

  16. Intensity Autocorrelation

  17. Intensity Autocorrelation FWHM suggests pulse width = 8ps. Very large!

  18. Chirp • Index of refraction depends on wavelength • Compensate with diffraction grating

  19. Chirp

  20. Intensity Autocorrelation

  21. Dechirped Autocorrelation

  22. Dechirped Autocorrelation FWHM = 330 fs = 1.5*220

  23. Interferometric Autocorrelation FWHM suggests pulse width = 220fs

  24. Spectrum

  25. Simulated Results Agrees with estimates 200fs

  26. Pulse Energy • Peak power estimated from pulse energy and characteristics Chirped Dechirped

  27. Peak Power Dechirped Chirped

  28. Questions?

More Related