1 / 31

RAD Pseudowires Solutions – Market and Products Overview

RAD Pseudowires Solutions – Market and Products Overview. Presented by: Merav Shenkar E-mail: merav_s@rad.com. Agenda. Introduction Typical applications of RAD PW products RAD PW products Summary. PW = Pseudowire. Background. RAD’s TDM Pseudowire Products Offering

elpida
Télécharger la présentation

RAD Pseudowires Solutions – Market and Products Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RAD Pseudowires Solutions – Market and Products Overview Presented by: Merav Shenkar E-mail: merav_s@rad.com

  2. Agenda • Introduction • Typical applications of RAD PW products • RAD PW products • Summary PW = Pseudowire

  3. Background RAD’s TDM Pseudowire Products Offering • Carrier class TDM voice or data over packet networks • Uniform TDM access across all last mile infrastructures • Preserves investment in legacy equipment in migration to PSN • Reduce the costs by avoiding the need to pay for leased lines • Lowers OpEx of TDM service by utilizing packet infrastructure. • Carrier grade voice quality (no compression, no Silence Suppression) Packet Network PW GW PW GW TDM Service TDM Service Pseudowire

  4. Leased Line PSN TDMoIP Solution – Campus Environment Application:Carrying PBX traffic over campus ETH network Benefits: • Using PSN to provide voice services • Saves leased line costs • Preserving legacy TDM equipment, features and functionalities Building 1 Building 2 PBX PBX LAN LAN

  5. BSC/RNC Radio Stations RAN Cellular Backhauling Using PW Market trends: • E1/T1 bandwidth is insufficient for new Broadband Services (e.g. HSDPA) • Mobile operators deployed 3G, which requires additional backhaul bandwidth • Circuit-based 2G co-located with ATM-based 3G • Network evolution from TDM/ATM to IP/MPLS • Future IP based Node B’s (3GPP R5/6) The RAN (Radio Access Network) typically consists of multiple E1/T1 Leased Lines

  6. Different Services over PSN Solution 3G • Multiplex mixed-generation links to a common transport • Convert between circuit, cell and packet • Transport of a legacy service over IP/MPLS tunnels • Multiplexing/aggregation of multiple services over PSN ATM ACE 2G TDM Cellular Services PSN GW PBX IPmux PSN Eth/IP/MPLS E1 TDM DSL Services VoIP LA DSL

  7. What is Pseudowire? • Pseudo = Simulated, Seemingly • Extends services over PSN (ETH/IP/MPLS) • Supports voice, data and video • Provides a transparent tunnel through the PSN • Defined by IETF PWE3 working groupsTDM PW, ATM PW, FR PW and ETH PW • Provides clock distribution and synchronization over PSN

  8. What is Pseudowire? PSN Network ATM VCC ATM VCC PW-GW PW-GW HDLC HDLC TDM Bundle TDM Bundle

  9. PW-Label VCC/E1 VCC/E1 PW-Label MPLS Switching 1. User Services are mapped to PW Switching is done according to the Tunnel label 2. Adding Tunnel Label E1-TDM E1-TDM PW-Label VCC/E1 Tunnel Label PSN-GW PSN-GW VCC VCC ETH ETH MPLS VCC VCC 3. The Tunnel Label is stripped VCC/E1 PW-Label Tunnel Label 4. PW Label mapped back to user services

  10. PW-Label PW-Label VCC/E1 VCC/E1 IP Header IP Header VCC/E1 PW-Label IP/ETH Switching Switching is done according to the IP addresses 1.User services are mapped to PW PW-Label VCC/E1 2. Adding Tunnel Label E1-TDM E1-TDM PW-GW PW-GW VCC VCC ETH ETH IP/ETH Network VCC VCC 3. The Tunnel Label is stripped 4. PW Label mapped back to user services

  11. Typical Applications

  12. TDM Backhaul/Trunking over PSN Gmux-2000 Gmux-2000 Target Customers • Alternative Carriers save on leased line capacity from incumbent • Large enterprises looking to save on leased line costs Benefits • Small foot print with high capacity: 196xE1/T1 or 2xSTM-1/OC-3 for a 6U chassis • Grooming of E1/T1 into lower cost STM-1/OC-3 ports E1/T1 Ch. STM-1/OC-3 E1/T1 Ethernet/ MPLS/IP GbE GbE SDH PABX Class 5 Switch

  13. PSTN Access over Packet IPmux-16 E1/T1 Fiber Gmux-2000 Ethernet Target Customers • Alternative Carriers • Incumbents in migration or out of their network reach Benefits • Unified TDM over packet solution regardless of access technology • Enables Ethernet and TDM service on the same infrastructure • Alternative carriers can increase revenue by selling TDM services GbE CMTS Ethernet/IP/ MPLS n x T1/E1 or Ch.OC-3/C.STM-1 IPmux-11/14 FT1/T1/n x T1 FE1/E1/n x E1 Cable HFC Infrastructure CableModem PSTN Fixed Wireless IPmux-11/14 FT1/T1/n x T1 FE1/E1/n x E1 DSLModem IPmux-1E

  14. 2G/3G Cellular traffic over PSN 3G RNC 3G Node B • Aggregation and tunneling (pseudo-wire) of both 2G TDM traffic and 3G ATM traffic over the same packet transport network • Mapping of TDM/ATM traffic to packets • Transparent backhaul of Abis and lub over the PSN • Clock distribution and network synchronization STM-1 STM-1 n x E1 IMA/UNI PW-GW PW-GW Packet Switched Network ETH ETH 2G BSC E1 TDM CH-STM-1 2G BTS PW GW STM-1 ETH n x E1 IMA/UNI Node B

  15. HSDPA Application – Cellular Backhaul over PSN/ATM Packet Switched Network GbE FE • Aggregation and tunneling (pseudo-wire) of both 2G TDM traffic and 3G ATM traffic over the same packet transport network • HSDPA differentiation using two types of networks to reduce data transport cost • Clock distribution and network synchronization ACE-3400 SGSN E1/T1s ATM/IMA ACE-3100 STM-1 2G BTS 3G RNC STM-1 E1/T1s ATM/IMA SDH/ATM Access Network STM-1 APS Redundancy STM-1 APS Redundancy 3G Node B

  16. 2G/3G ATM over PSN Using DSL Access PSN • E1 TDM traffic from the 2G BTS and E1 UNI/IMA traffic from the 3G NodeB is encapsulated as data and tunneled towards the BSC/RNC as TDM/ATM PW • The ACE\Gmux terminates the TDM/ATM PW and hands the TDM/ATM traffic to the BSC/RNC LA-110 E1 TDM xDSL 2G BSC ATM Gmux-2000 ACE-3400 BTS IP-DSLAM PSN Eth/IP/MPLS LA-130 GbE GbE n  SHDSL E1s 3G RNC ATM IMA IMA 3G Node B ATM UNI STM-1

  17. RAD PW Products

  18. IPmux-11, IPmux-14 • IPmux-11 – 1xE1/T1 TDMoIP gateway • Single E1/T1 port with 2 user Ethernet ports • Single network port with copper or fiber • Cost effective CPE/CLE providing both Ethernet and TDM service • IPmux-14 – 2/4xE1/T1 or 1xSerial TDMoIP Gateway • 2/4 E1/T1 ports with 2 user Ethernet ports • Serial interface support for nx64, X.25, RS-232, V.35 legacy services • Single network port with copper or fiber • Grooming on time slot level • IPmux-14/T & IPmux-14/A Support all IPmux-14 features including advanced timing mechanism compliance with adaptive clock according to G.823 Traffic/Sync interface IPmux-11 IPmux-14 IPmux-14/A

  19. Gmux-2000 • High-capacity carrier-class TDMoIP gateway • Used as a central site solution for RAD’s TDMoIP products, operating opposite IPmux-1E, IPmux-11, IPmux-14/116, IPmux-8/16 and Megaplex ML-IP • Modular chassis includes: • GbETH network module • Up to two STM-1/OC3 network modules • Up to 196 E1 or T1

  20. IPmux-116 • Supports TDM, HDLC-based and Ethernet services over Ethernet, MPLS or IP networks with Pseudowire technology • Ideal solution for Cellular backhaul, PSTN access and TDM trunking • Provides cost effective solution for converging new and legacy services over packet infrastructure • Up to 16 E1 or T1 ports • Available for beta in Q2/2007 New

  21. IPmux/Gmux Main Features • Applicable over: • L2/MPLS/IP networks/backbones • Encapsulation protocols: • TDMoIP • OAM support • Alarm forwarding propagation • Clock recovery mechanism- Complies to G.823/4 Traffic interface & G.8261 • ETH NTU • Gmux Redundancy: • STM-1/OC-3 port/module level redundancy GE port level redundancy (Phase 2.xx)

  22. RAD’s TDMoIP Product Family Product

  23. ACE-3100 & ACE-3200 ACE-3200 ACE-3100 • ACE-3100: • 4 x T1/E1 UNI (ASAP) with 2 x STM-1 UNI • 2 x Fast Ethernet ports – For OOB management or as an uplink for PSN support • ACE-3200: • 8/16 x T1/E1 UNI with 2 x STM-1 UNI • 2 x Fast Ethernet ports – For OOB management or as an uplink for PSN support • Redundant PS option (AC/DC)

  24. ACE-3400 32/63 E1/T1 UNI/IMA/CES (ASAP) 4 Pluggable network interfaces supporting 1 GbE Up to 3 STM-1 UNI (one for Redundancy) 3U, 19”, Fully modular ACE-3402 4 Pluggable network interfaces supporting 1xGbE 2 x STM-1 UNI 1+1 Channelized STM-1/OC3 with support for 63/84 E1/T1 over VC12/VT1.5 2U, 19”, Fully modular ACE-3400 & ACE-3402 ACE-3400 ACE-3402 • Fully redundant, no single point of failure • 2 swappable AC or DC power supplies • Total front access

  25. ACE-3600 New • Carrier class, without single point of failure • Hot swappable cards with redundancy: • 2 x main cards with software redundancy mechanism • 2 x modules with 4 x ATM-155 and 1 x Gigabit Ethernet • 2 x AC/DC power supply, must be of the same type • Fan tray with 2 x fans, can operate with a single fan only • Swappable cards with redundancy: • Manage card with OOB Ethernet and terminal control ports • Station clock – not swappable, not redundant • Total front access

  26. ACE-3x00/PSN Main Features • Applicable for backhauling over: • L2/MPLS/IP networks/backbones • Encapsulation protocols: • ATM over PSN for 3G- ATMoPSN • CES over PSN for 2G- CESoPSN/SAToP • 1:1 and N:1 mapping mode (for ATMoPSN) • PW connectivity verification • Alarm forwarding support • Clock distribution and synchronization support according to G.823 synchronization interface • Multicast support • LDP support- Label Distribution Protocol enables the device to learn the MPLS labels automatically (phase 5)

  27. Physical Description

  28. 4 E1\T1 ports (ATM or TDM) 1 CES and up to 3 ATM UNI or IMA 4 E1 ASAP – Q1/07 WAN interfaces SHDSL 4 pairs IMA ADSL2+ (Q2\07) User ports: 4 ISDN S0, 4 POTS, E1, T1 1 LAN interface 1 data port V.35/X.21 Network SHDSL, ADSL, E1-UNI, IMA LA-110 & LA-130 LA-130 LA-110

  29. RAD Pseudowire Product Guide

  30. Summary The PW solution enables: • Smooth migration to new packet based transport networks • Good for voice, data and video traffic • Provide a complete solution for TDM, ATM and DSL services over PSN using RAD PW products • Transparent to protocols and signaling • Reducing the cost by avoiding the need to use leased lines • Controlled transport costs by maximizing utilization of RAN infrastructure • Standardized by the IETF PWE3 working group

  31. thank you for your attention Merav Shenkar BroadBand Access team Email: merav_s@rad.com www.rad.com

More Related