1 / 5

AR2FL/S and No/Lo Gain followup

AR2FL/S and No/Lo Gain followup. Campion Anton Mitch. Chip 2 Ch 14 AR2FL. Problem on module was reproduced July 21. Not Present mounted on Module with a 10pF loaded PIB replacing straw Reduced in magnitude on module with improved RF finger connection.

emil
Télécharger la présentation

AR2FL/S and No/Lo Gain followup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AR2FL/S and No/Lo Gain followup Campion Anton Mitch

  2. Chip 2 Ch 14 AR2FL • Problem on module was reproduced July 21. • Not Present mounted on Module with a 10pF loaded PIB replacing straw • Reduced in magnitude on module with improved RF finger connection.

  3. No Gain ChannelsExternal pulser investigation • One of several low gain channels responding to an external test pulse input. • The pulse amplitude is chosen to cause the same response as a 50mV step in a normal channel.

  4. Internal Pulser Demonstrating No/Lo Gain Channels Algen ‘A’ wheel Board #124180

  5. Lo/No Gain Statistics(All Boards) * Confirmed with external pulser Full spreadsheet on tested boards at www.hep.upenn.edu/atlas  On Detector boards  End Cap wheel boards  End_Cap_debugging

More Related