1 / 22

Laboratory Ergonomics

Laboratory Ergonomics If you have questions about this training series or any occupational health & safety issue, please contact EH&S by phone, at 294-5359, or by e-mail at ehswwwadm@ehsa.adp.iastate.edu .

emily
Télécharger la présentation

Laboratory Ergonomics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laboratory Ergonomics

  2. If you have questions about this training series or any occupational health & safety issue, please contact EH&S by phone, at 294-5359, or by e-mail at ehswwwadm@ehsa.adp.iastate.edu.

  3. This module will provide the reader with specific examples of equipment and techniques to reduce or eliminate laboratory ergonomic risk factors. An introduction to ergonomics can be found in the e-book presentation, “Introduction to Ergonomics”

  4. Seating Whether using a microscope, plating cultures, preparing samples or working at a computer, seating plays an essential role in laboratory ergonomics.

  5. Seating - Solutions • Adjust stool seat height and potentially use a stand-alone, adjustable footrest. If both are not adjustable, consider purchasing a new stool and/or footrest.

  6. Seating - Solutions • Does the chair provide adequate back support. It not, potentially obtain an attachable backrest cushion.

  7. Fume Hoods and Biosafety Cabinets Typical ergonomic issues with fume hoods and biosafety cabinets include back and shoulder strain, forearm compression at the cabinet edge and lack of leg space under the unit.

  8. Fume Hoods and Biosafety Cabinets - Solutions • Adjust your chair properly. • Some units may be pulled out from the wall to create foot space. • Where feasible, set the unit on a table rather than a cabinet to create foot space.

  9. Microscopes and Accessories Sitting at a microscope for prolonged periods can lead to a number of symptoms including back, shoulder, neck and arm discomfort as well as eye fatigue.

  10. Microscopes and Accessories - Solutions • Adjust stool seat height and foot-ring height. If both are not adjustable, consider purchasing a new stool. • Mount your microscope on a tilted platform to improve head/neck angle or check with your supplier about adjustable eyepieces. The Bay Optical ErgoAdapter

  11. Microscopes and Accessories - Solutions • Consider replacing standard eyepieces with magnifying viewers • Consider using a video system and/or motorized joystick stage controllers.

  12. Microscopes and Accessories - Solutions • If vibration is a problem, consider an anti-vibration paltform • Consider purchasing stage armrests.

  13. Microscopes and Accessories - Solutions • To allow variable height, place the microscope on an adjustable riser for computer monitors.

  14. Hand/Arm Fatigue and Strain • Many laboratory procedures lead to ergonomic risk factors such as static muscle loading, high hand/finger forces and repetition.

  15. Hand/Arm Fatigue and Strain - Solutions • When working with microcentrifuge tubes, consider using tube openers. • Request easy-open tubes

  16. Hand/Arm Fatigue and Strain - Solutions • When selecting pipettes, consider: • models with low plunger and ejection activation force • thin-walled tips for easy ejection • electronic pipettes • multi-channel pipettes • pistol-grip (finger, vs. thumb activation) pipettes

  17. Hand/Arm Fatigue and Strain - Solutions • Ergonomic pipette

  18. Hand/Arm Fatigue and Strain - Solutions • Be aware of body posture and habits. Try to keep the arms as low as possible and close to the body to reduce static muscle loading. • Use low profile waste receptacles, no higher than the height of the tubes that you are using. • Rotate the pipetting tasks among several people.

  19. Hand/Arm Fatigue and Strain - Solutions • Task automation can reduce ergonomic stresses and save time. Consider purchasing automatic mixers and mortar grinders. • Where practical, consider using clamps to hold test tubes.

  20. Laboratory Computers Traditional laboratory benches and tables are not well-suited to computer use. Typically they are too high and are often too thick to allow proper height for seated keyboard work.

  21. Laboratory Computers - Solutions • Remove a drawer and raise a lab stool such that forearms are approximately parallel to the floor during keying. • Allow the arms to hang next to the body, avoiding reaching. • Raise the keyboard and monitor to standing height. • Purchase a separate computer workstation

  22. finis

More Related