1 / 13

Required tools for installation of a V-1020C speaker with V-9914 bridge.

Required tools for installation of a V-1020C speaker with V-9914 bridge. First, cut a pre-measured hole in the ceiling tile. Using the bridge as a guide, determine the screw holes for the ceiling tile. Align the speaker with the holes in the ceiling tile.

erv
Télécharger la présentation

Required tools for installation of a V-1020C speaker with V-9914 bridge.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Required tools for installation of a V-1020C speaker with V-9914 bridge.

  2. First, cut a pre-measured hole in the ceiling tile.

  3. Using the bridge as a guide, determine the screw holes for the ceiling tile.

  4. Align the speaker with the holes in the ceiling tile.

  5. Align the speaker with the bridge on either side of the ceiling tile.

  6. Attach all three pieces with the provided hardware.

  7. Connect all wiring to the screw cages on the speaker.

  8. Place the speaker assembly in the ceiling grid.

  9. Lower the speaker assembly into position in the ceiling grid.

  10. Insert the included volume control knob and adjust the speaker volume...

  11. ...or adjust the speaker volume with a flat blade screwdriver.

More Related