Exothermic welding system – Permanent bonding for your earthing installation

1. A Superior Choice for Effective Way of Welding Exothermic welding system – Permanent bonding for your earthing installation Earthing System is mandate for every electrical installation. Connecting the conductive part of the appliance to ground ensures that the potential does not reach an alarming level which may endanger life and property. In the earthing process, numerous electrical connections are to be made. Connections should be permanently secured. For making connections, there are some commonly followed techniques.

2. A Superior Choice for Effective Way of Welding Conventionally, techniques such as welding, brazing, bolting, etc. were preferred to create joints. The joints resulting from conventional technique is highly porous and unreliable. Traditional methods when employed leads to a week joint formation which gets loosen with time or get corroded.However, with time we have accepted an advanced technology which is Exothermic Welding System to make solid long-lasting connections.

3. A Superior Choice for Effective Way of Welding To make connection Exothermic welding process is used to join two conductors. The process mainly joins copper to copper, copper to steel, copper to brass, Gunmetal to Copper, etc. A graphite mould, exothermic welding power, mould handle clamp, flint gun, mould brush, clamp brush, mould scraper and file card brush is all you require in your welding kit. The mould for making the joint should be chosen after considering the type of joint that has to be made and also the dimensions of the conductors. While performing the process, you must be in your protective outfit. Further ensure that the mould and the conductor surfaces are clean as any sort of impurity can lower the quality of the connection. After the cleaning purpose, place the conductors and after closing the mould pour the weld powder on top. Then ignite the starting powder using a flint gun which will initiate a chemical reaction that will produce an exothermically welded connection after losing the heat. This technique does not require external heating provision. More Features Superior electrical conductivity. Does not deteriorate or corrode with age. Widely accepted method owing to its stability and durability. It adds on to the conductivity of the entire grounding system. It can withstand extreme temperature beyond 1083 degree Celsius. Comply with mandatory standards – IEEE 837, UL 467, National Building Code 2016 Types of joints can be- Tee joint, Cross joint, parallel connection, straight joint, L joint, etc.