1 / 33

Vigilant Sensing Technology

Vigilant Sensing Technology. VST1000 Remote Sensing System Preliminary Design Review Development Team: Patrick Hauser Joel Keesecker Mark Kien. Review Outline. Project Objectives Motivation System & Module Descriptions Division of Labor Condensed Schedule Risks & Mitigation

fareeda-hormizd
Télécharger la présentation

Vigilant Sensing Technology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Vigilant Sensing Technology VST1000 Remote Sensing System Preliminary Design Review Development Team: Patrick Hauser Joel Keesecker Mark Kien

  2. Review Outline • Project Objectives • Motivation • System & Module Descriptions • Division of Labor • Condensed Schedule • Risks & Mitigation • Questions

  3. Project/System Objectives • Seamless turnkey operation • Broadband pipeline for expandability • Selection of narrowband sensors • Clandestine packaging of remote units

  4. Motivations • Provide generic, economical remote sensing ability for use in public safety and medical environments. • Use non-dedicated lines to communicate with the sensors in the field.

  5. System Level Diagram

  6. System Modules • Master Control Unit • RF Remote Sensing Unit • Power Line Remote Sensing Unit • PC Interface

  7. System Interfaces

  8. Master Control Unit (MCU)

  9. MCU Basic Functions • LCD: Sensor data, errors, and status • Status LEDs: Tx, Rx, Power, Error • Liaison between Remote Unit and Host PC • Store data when com link is lost (100 Recs) • Error monitoring and detection routines

  10. MCU Module Interfaces

  11. MCU Microcontroller Requirements • Single Board Microcontroller • Memory to support the following: • Buffering and storage of sensor data (record size TBA). • Operating firmware (code size TBA). • Ports: 1-GPSI, 2-RS232, 16-GPIO • Speed to support data movement.

  12. MCU Power Line Modem Requirements • Support serial high speed data – 14Mbps • Provide P/S for MCU or use single supply • FCC approved for industrial use • Small and easy to assimilate into MCU

  13. MCU RF Modem Requirements • 2.4 GHz FCC Unlicensed Band Operation • Support serial high speed data – 250Kbps • Single power supply • Small and easy to assimilate into MCU

  14. MCU Power Supply Requirements • Highly efficient design – switching • Will supply all modules with specific needs • Strive for single supply solution • High likelihood for final design group build

  15. Remote Sensor Unit (RSU)

  16. RSU Basic Functions • Monitor sensors, send data when critical threshold is reached • Format and communicate sensor data to MCU • Respond to commands from MCU • Status LEDs: Tx, Rx, Power, Error, Low Battery • Report RSSI to monitor link quality • Custom PCB • Unique ID for each sensor

  17. Sensors • Original Idea: Radiation Detection • Possible Sensors: • Temperature • Wireless Signal Detection • Possibly ADL5500 • Motion • Air Quality (eg. Clean Room) • Board capable of supporting a variety of sensors

  18. RSU Interfaces

  19. RSU Microcontroller Requirements • Same architecture for both boards (TI / Freescale / Atmel) • Low power consumption • At least 2 channel 8-bit onboard ADC • Onboard UART • Real time clock • Ports: 1 GPSI/RS-232/RS-485, 8-16 GPIO, ICSP/ISP

  20. RSU Power line Sensor • GPSI Interface to power line transceiver • Possibly using Asoka PL80-9105-001 • If broadband power line communication proves to difficult fall back to narrowband. • AC-DC switching power supply

  21. RSU Wireless Sensor • 2.4 GHz wireless communication • Using Xbee or RS-232 Wireless Modem • Battery, Charger, and monitor • 9-12 V Lithium-ion Battery • Charger Purchased or own design • DC-DC switching power supply • Low standby power consumption

  22. PC Interface

  23. GUI/Host PC Basic Functions • Interface through RS232 to the MCU • View historic and “real time” sensor data • Control data acquisition • Store data to database • Monitor sensor status (RSSI, Battery life) • Error monitoring and detection routines

  24. GUI Data Viewer • Table of detects • Detailed info of selected detect • Detailed info on most recent detect • Get Detect from wireless device • Get Detect from power line device

  25. GUI Sensor Information • Battery power (wireless device) • Sensor unit RSSI • Number of sensors on power line unit • Number of sensors on wireless unit • ID mapping • ID number and corresponding sensor

  26. Host PC RS232 Communication • Script to read and write to port • On read, update database • Communicates with master controller • Continuous/Scheduled update • Fetch data upon GUI request

  27. GUI - If Time Permits • Website • Data viewing only • Way to view data from anywhere • Historical Info • Plot user defined historical data • Scatter or bar graph depending on data • Ex. Temperature over time • Ex. Number of Motion detects/day over 1 week

  28. Division of Labor

  29. Condensed Schedule

  30. Risks & Mitigation • Noisy lines could make power line communications difficult • Down grade to narrow band modems or drop Power Line Modem option altogether. • Part availability • Address part concerns well in advance of need • Resources limited • Reduce scope and/or leverage additional dev. tools.

  31. Questions / Suggestions

More Related