1 / 9

ELECTRICAL SAFETY in the Lab

ELECTRICAL SAFETY in the Lab. C. Poole, REAG. ELECTRICAL SAFETY in the Lab.

finley
Télécharger la présentation

ELECTRICAL SAFETY in the Lab

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ELECTRICAL SAFETY in the Lab C. Poole, REAG

  2. ELECTRICAL SAFETY in the Lab “Electricity is invisible. It cannot be seen, heard, tasted, or smelled. Like a snake hiding in the grass, electricity will strike if you don’t follow safe work practices as well as using and maintaining safe equipment.” Ed Mendenhall Safety & Health Jan 2001

  3. 3.10 ELECTRICAL SAFETY in the Lab Because of the inherent hazards of working with electricity, the following procedures are provided to help identify safe work practices:

  4. ELECTRICAL SAFETY in the Lab • electrical service cords should be in good condition • remove remove from service any equipment with frayed cords or exposed wires • all electrical equipment must be grounded, use 3-pronged plugs

  5. ELECTRICAL SAFETY in the Lab • use a single plug for each electrical connection • multiple plugs for additional connections should be avoided • do not overload circuits

  6. ELECTRICAL SAFETY in the Lab • electrical equipment such as mixers or hot plates, should not be used near flammable solvents unless they are explosion proof • never bypass any safety device on a piece of electrical equipment • all electrical repairs should be made by qualified personnel

  7. ELECTRICAL SAFETY in the Lab • Water can turn anything into an electrical conductor - don’t stand in water or have water on your hands when using electrical equipment. • In case of an electrical fire, don’t touch the burning object (duh!) or douse it with water. Turn off power if possible. If it’s small, extinguish it with a fire extinguisher. • Never use temporary wiring.

  8. ELECTRICAL SAFETY in the Lab • 1. Electricity takes the path of least resistance. • 2. Electricity wants to go to ground. • 3.If an electrical appliance or tool falls into water, it will short out. • 4. It takes high voltage to kill. • 5. Double-insulated power tools can be used in wet and damp locations. 5 Electrical Myths You Need to Know

More Related